Axis 02586-001 Wall Mount Bracket for M20 Bullet Cameras
Overview
The Axis 02586-001 (often searched as 02586 001) is a dedicated wall mount bracket designed to support Axis M20 series bullet cameras, specifically the M2035-LE and M2036-LE models. This is a straightforward mechanical accessory — no electronics, no power draw, no integration overhead. It solves a specific installation problem: securing compact bullet cameras to vertical surfaces while maintaining consistent aim and preventing drift or vibration.
The bracket ships as a pack of 5 units, making it practical for multi-camera deployments where you need uniform mounting hardware across sites or a single larger installation. Wall mounting is often the default choice for buildings with solid exterior or interior masonry, steel, or wood framing where ceiling or soffit mounting isn't feasible or desirable.
Key Features
- M2035-LE and M2036-LE Compatibility: The 02586-001 is engineered for these specific Axis bullet models. Both are compact 1080p and 2MP options with deep learning analytics capability — models often chosen for cost-sensitive deployments that still demand edge-based object detection and event classification.
- Wall-Mount Form Factor: Positioned horizontally on a wall, this bracket allows you to aim the bullet body left, right, and up/down using the camera's built-in pan and tilt adjustment. No motorized PTZ — manual aim only — but that keeps cost and maintenance low and works well for fixed-coverage scenarios like building perimeters, loading docks, or corridor surveillance.
- Pack Quantity (5 Units): Buying in fives means you can standardize mounting across a distributed site (five warehouses, five building corners, five retail locations) without mixing bracket styles or dealing with multiple SKUs. This reduces inventory complexity and training burden for install teams.
- Mechanical Simplicity: No power, no configuration, no firmware updates. Mount it, aim the camera, and it stays put. Perfect for organizations that want to minimize moving parts and potential failure modes in outdoor or harsh-environment installations.
Integration & Compatibility
The 02586-001 is hardware-only and does not interact with any network, VMS, or security system. Its sole function is mechanical support. It works with any M2035-LE or M2036-LE camera regardless of how you record (on-device microSD, network video recorder, cloud service, or hybrid). You can integrate these cameras into network video recorders or standard ONVIF-compatible VMS platforms; the bracket does not affect or constrain that choice.
If you're planning a mixed-deployment with both wall-mounted and ceiling-mounted M20 cameras on the same job, you will need both this wall bracket and a separate ceiling mount — they are not interchangeable.
When to Choose a Different Mounting Solution
If your installation requires tilt-down surveillance (aiming steeply downward from high walls or soffit mounting), consider whether a pendant mount or adjustable arm bracket might offer better ergonomics. If the camera will be exposed to sustained impact or vibration (near machinery, near vehicle traffic), verify that the bracket fasteners and the wall substrate can absorb that shock without loosening over time. If you need motorized pan/tilt adjustment, the Axis M20 series cameras do not support that — you would need to step up to a PTZ camera with motorized positioning.
Typical Deployments
Wall mounting works well for building perimeter surveillance, warehouse loading zones, retail storefront monitoring, and corridor coverage in office or industrial settings. The pack of five is typical for small chains, multi-site operators, or system integrators stocking standard hardware across customer accounts.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The 02586-001 is a no-frills wall bracket that deserves consideration if you're rolling out M2035-LE or M2036-LE cameras across multiple sites and want to standardize hardware. I've seen integrators buy these in bulk (in packs of 5) for warehouse chains or retail deployments where every location needs the same mounting footprint and aiming flexibility.
Technical Highlights:
- Pack of 5 Units: Reduces SKU count and simplifies field stock rotation. On a 20-camera deployment, you order four packs and have one spare bracket for future expansion or replacement.
- M2035-LE / M2036-LE Specificity: These are compact 1080p/2MP models with deep learning onboard, popular in cost-conscious deployments. The bracket is optimized for their weight and mounting footprint — no guessing, no shimming.
- Manual Aim Only: No motorized pan/tilt means no power draw at the bracket, no moving parts to fail, and fast initial aiming in the field. Manual adjustment via the camera body keeps commissioning simple.
Deployment Considerations:
- Fastener selection is critical. Concrete, brick, or steel walls require different anchors and torque specs — order the right fastener kit upfront or you'll waste time in the field. Check the datasheet for manufacturer recommendations.
- Watch for wind loading on exposed walls. The M20 cameras are light (under 500g typically), but a wall-mounted bracket in a windy location may need over-torqued fasteners or vibration-damping washers to prevent creep or micro-movement that degrades image stability over months.
Position the 02586-001 for warehouse perimeter coverage, building entry/exit monitoring, or retail loading-dock surveillance where wall mounting is the practical choice and you don't need remote pan/tilt control. For indoor office corridors or back-of-house areas, this bracket is straightforward and reliable.
