Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-168HM

Hanwha SBP-168HM Ceiling Mount Cap Adapter for XNP-6120H

Ceiling mount adapter for XNP-6120H with IP66 weather sealing
- XNP-6120H exclusive fit—verify camera model before ordering
- IP66 rated for dust and water resistance in covered outdoor locations
- Operates -20°C to 50°C; weather-resistant materials resist corrosion
In stock · Usually Ships Same Business Day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-401

Axis T94B01P Conduit Back Box Accessory - 5507-401

Conduit back box for M3044/M3045/M3046 compact domes with ½" ACI
- ½" NPT and M20 pipe compatibility fits standard building infrastructure
- Integrated 1/4"-20 tripod thread mounts camera directly to box
- ½" ACI interface routes cables through conduit cleanly and protected
In stock · Usually Ships Same Business Day

$31.00 $29.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302PM

Hanwha SBP-302PM Pole Mount for Bullet Cameras

Pole mount for Hanwha bullet cameras on 80mm+ posts with angle adjust
- Stainless steel straps resist corrosion in outdoor parking lots and building entrances
- Dark gray finish blends into infrastructure without visual clutter
- Adjustable tilt positioning lets you dial in coverage angles after installation
In stock · Usually Ships Same Business Day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CB135

Hikvision CB135 Wire Intake Box for Dome Camera

Sealed wire intake box for dome cameras in wet and coastal environments
- IP66-rated aluminum alloy housing keeps moisture away from connectors
- Direct-mount design for DS-2CD23x5/7G1 and DS-2TD1217 dome series
- Anodized construction resists corrosion in salt-air and high-humidity sites
In stock · Usually Ships Same Business Day

$30.00 $21.99 Save $8.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-136BW

Hanwha SBV-136BW Waterproof Aluminum Back Box

IP66 waterproof aluminum back box for outdoor Hanwha cameras
- IP66 rating shields connections from rain, dust, and high-pressure jets
- Aluminum construction resists corrosion in coastal and wet environments
- Knockout cable panels allow tool-free customization without drilling
In stock · Usually Ships Same Business Day

$49.00 $36.99 Save $12.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-126B

Hanwha SBO-126B Aluminum Backbox for Bullet Cameras

Aluminum backbox for Hanwha bullet cameras; IP67 weather & corrosion protection
- Corrosion-resistant aluminum construction rated IP67 for coastal and humid climates
- Integrated cable routing and pre-engineered mounting for Hanwha bullet cameras
- Wall, soffit, or pole-mount compatible; IK10 impact resistance for secure outdoor install
In stock · Usually Ships Same Business Day

$49.00 $36.99 Save $12.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5502-401

Axis P33 Mounting Bracket for Junction Boxes - 5502-401

Ceiling box mount for P33, M30, P32 cameras—no custom drilling
- Works with 4" square/octagon and single/double-gang electrical boxes
- Compatible with AXIS P33-V, P33-LV, select M30 and P32 models
- Indoor use in offices, retail, and warehouse ceilings
Special Order · Usually Ships in 2-3 Weeks

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HM6

Hanwha SBP-300HM6 Aluminum Hanging Mount

Aluminum pendant mount for 10+ Hanwha camera models, ceiling-ready
- Lightweight aluminum construction resists sagging in overhead installations
- Compatible with SNV, SCV, PNV, XNV series cameras plus SBP-300 brackets
- Silver finish blends discretely into drop ceilings and structural elements
In stock · Usually Ships Same Business Day

$49.00 $37.99 Save $11.01

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR501M1-W

i-PRO WV-QSR501M1-W Wall Mount Bracket 1.5 NPT

White wall mount bracket with 1.5" NPT for dome camera installation
- 1.5" NPT thread standard with ANSI male connector for secure fitting
- Wall-mounted form factor in white finish for discrete surveillance setup
- Professional-grade construction designed for i-PRO dome camera systems
Special Order · Usually Ships in 2-3 Weeks

$136.47 $121.99 Save $14.48

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-991

Axis P12 Camera Mounting Bracket 5-Pack - 5503-991

19-inch rack mount brackets for Axis P12 cameras, 5-pack
- Five brackets per package fit standard EIA racks for organized multi-camera deployments
- Engineered specifically for Axis P12 series cameras with consistent alignment
- Commercial and light industrial rated construction for indoor equipment rooms
In stock · Usually Ships Same Business Day

$63.00 $60.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-091

Axis T91A06 Pipe Adapter 3/4-1.5" - 5503-091

3/4" NPT to 1.5" NPS adapter for AXIS T91A pendant brackets
- Converts 3/4" NPT pipe to 1.5" NPS thread without cutting or rethreading
- Hand-tight screw-on design installs in minutes with no special tools required
- Metal construction spans entire T91A bracket family for mixed-infrastructure sites
In stock · Usually Ships Same Business Day

$13.00 $12.99 Save $0.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-361

Axis T94B02D Pendant Kit White - 5507-361

Pendant mount for Axis dome cameras; 1.5" NPS and 3/4" NPT threads
- Hangs from ceiling infrastructure with 1.5" NPS or 3/4" NPT threaded pipe
- Fits Axis M20, M31-LV, M30-V, and Companion series dome cameras
- White finish blends into drop ceilings and indoor office environments
In stock · Usually Ships Same Business Day

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5502-431

Axis 5502-431 Pendant Mount Kit

Pendant and rack mount kit for flush ceiling installation of Axis compact domes
- Dual configuration supports vertical cable drop or rack positioning for flexible deployment
- Recessed design minimizes ceiling profile; rigid construction isolates vibration from HVAC
- Complete kit includes brackets, fasteners, and mounting template for quick installation
In stock · Usually Ships Same Business Day

$59.00 $56.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR504F-W

i-PRO WV-QSR504F-W ISO Female White Wall Mount Bracket

White wall mount bracket for PTZ cameras with ISO female 1.5"Rp
- ISO female 1.5"Rp connection mates directly with compatible i-PRO PTZ housings
- Wall-mount design positions cameras on vertical surfaces without ceiling cuts
- White finish blends into office and institutional environments with minimal visual impact
In stock · Usually Ships Same Business Day

$85.30 $76.99 Save $8.31

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01165-001

Axis T91B47 Stainless Steel Pole Mount 50–150mm - 01165-001

Stainless steel pole mount for 50–150mm diameter supports, indoor/outdoor
- 570mm stainless steel straps distribute load evenly and resist corrosion
- TX30 screw interface connects directly to Axis camera mounting points
- Single mount accommodates poles 2–6 inches in diameter across installations
In stock · Usually Ships Same Business Day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-171

Axis T94F01S Mount Bracket for Compact Cameras - 5505-171

Precision wall and ceiling bracket for compact Axis dome cameras
- Compatible with M3006-V, M3007-P/PV, M3024-LVE, M3025-VE, M3026-VE
- Professional-grade construction with straightforward fastener installation
- IP68-rated white bracket eliminates mounting flex and camera drift
Special Order · Usually Ships in 2-3 Weeks

$31.00 $29.99 Save $1.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Hanwha SBP-168HM Ceiling Mount Cap Adapter for XNP-6120H

Axis T94B01P Conduit Back Box Accessory - 5507-401

Hanwha SBP-302PM Pole Mount for Bullet Cameras

Hikvision CB135 Wire Intake Box for Dome Camera

Hanwha SBV-136BW Waterproof Aluminum Back Box

Hanwha SBO-126B Aluminum Backbox for Bullet Cameras

Axis P33 Mounting Bracket for Junction Boxes - 5502-401

Hanwha SBP-300HM6 Aluminum Hanging Mount

i-PRO WV-QSR501M1-W Wall Mount Bracket 1.5 NPT

Axis P12 Camera Mounting Bracket 5-Pack - 5503-991

Axis T91A06 Pipe Adapter 3/4-1.5" - 5503-091

Axis T94B02D Pendant Kit White - 5507-361

Axis 5502-431 Pendant Mount Kit

i-PRO WV-QSR504F-W ISO Female White Wall Mount Bracket

Axis T91B47 Stainless Steel Pole Mount 50–150mm - 01165-001

Axis T94F01S Mount Bracket for Compact Cameras - 5505-171

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading