Axis 01165-001 T91B47 Pole Mount 50–150mm
The Axis T91B47 (model 01165-001) is a stainless steel pole mount engineered for secure camera installation across utility poles, traffic signal supports, and structural columns ranging from 50mm to 150mm (approximately 2 to 6 inches) in diameter. This accessory bridges the gap between camera selection and field deployment, handling both indoor and outdoor environments without compromising installation integrity.
Key Features
- Pole Diameter Range (50–150mm): Accommodates most standard utility poles and structural supports found in warehouses, parking facilities, and perimeter installations. You won't need multiple mount variants for different pole sizes—one T91B47 handles the range. This reduces SKU overhead and simplifies inventory on multi-site deployments.
- 570mm Stainless Steel Straps: The extended strap length distributes load evenly across the pole surface, preventing point stress and reducing vibration transmission to the camera. Stainless steel (typically 304 or 316-grade) resists corrosion in coastal, high-humidity, and salt-fog environments—a meaningful advantage over galvanized steel in industrial or marine settings.
- TX30 Screw Interface: Direct mechanical attachment to Axis camera mounting points. This standardized interface simplifies field swaps and allows rapid camera repositioning without additional adapters or bracket modifications. TX30 fasteners resist loosening under vibration and temperature cycling.
- Indoor and Outdoor Rated: Weather-resistant construction means you deploy this mount in exposed or semi-sheltered locations without additional protective shrouds. No special ventilation, no thermal concerns, no IP rating downgrades due to mounting hardware.
- Direct Axis Compatibility: Works across the Axis IP camera lineup—from compact fixed domes to modular multi-sensor platforms. Verify your specific camera's mounting thread before purchase, but integration is plug-and-play for any TX30-equipped model.
- Minimal Installation Footprint: Pole mounts eliminate the need for wall penetrations, conduit runs, or structural modifications. Deployment speed matters in parking lot upgrades, temporary surveillance projects, and warehouse expansions. This mount cuts installation labor by avoiding drilling and concrete anchoring.
Integration & Compatibility
The 01165-001 pairs with outdoor IP cameras and works within broader surveillance architectures—network video recorders, NVR platform selection, and managed switch deployments. Ensure your camera's mounting interface matches TX30 thread specifications. For high-vibration locations (truck yards, rail corridors), consider supplemental cable strain relief or vibration dampening on the straps themselves.
When to Choose a Different Model
If your pole diameter falls below 50mm (thin fence posts, small structural columns), consider a tighter-band variant designed for narrower supports. For poles exceeding 150mm in diameter, the strap length may not provide sufficient wraparound, requiring a different bracket family or a bespoke mounting solution. If installation requires wall, ceiling, or pendant mounting, the T91B47 pole-specific design is not the right fit—select a universal bracket instead.
Deployment Considerations
Pole mounts simplify coverage in open-plan facilities: parking structures, exterior perimeter lines, and cargo yards. Verify pole material (metal vs. composite) and surface condition before installation—rust or peeling paint reduces strap grip. Tighten the TX30 fasteners to manufacturer torque specs and inspect periodically in high-wind zones or extreme temperature environments.
Frequently Asked Questions
Q: Will the Axis 01165-001 work with non-Axis cameras?
A: The T91B47 is designed for Axis cameras with TX30 mounting threads. If your camera uses a different thread standard (e.g., 1/4-20 or M6), you'll need an adapter or a different mount.
Q: What is the maximum camera weight the 01165-001 can support?
A: The evidence does not specify a weight rating. Contact the manufacturer or your integrator for load capacity verification before mounting heavy PTZ or multi-sensor units.
Q: Is stainless steel strap replacement available for the 01165-001?
A: Replacement straps may be available as spare parts. Check with your distributor or Axis support for part numbers and availability.
Q: Can the 01165-001 be used indoors?
A: Yes. The mount is rated for both indoor and outdoor deployment. Indoor pole applications include warehouse structural supports, cable trays, and distribution center column mounting.
Q: What is the operating temperature range for the 01165-001?
A: Temperature range is not specified in the available evidence. Stainless steel hardware generally tolerates –40°C to +60°C, but verify with the manufacturer for this specific model.
Q: Does the 01165-001 include mounting hardware or fasteners?
A: The mount features stainless steel straps and TX30 interface. Verify whether additional bolts, washers, or cable clips are included by reviewing the product documentation or contacting your supplier.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 01165-001 is a straightforward, high-utility accessory that solves a real problem: rapid camera deployment on poles without structural modification. The 570mm stainless steel straps handle the 50–150mm diameter range effectively, eliminating the need to stock three or four different bracket SKUs for a typical mixed-pole deployment.
Technical Highlights:
- Stainless Steel Straps (570mm): Strap length distributes load across a wider surface, reducing vibration and point stress. Stainless construction withstands coastal salt spray and industrial humidity—galvanized alternatives degrade faster in those environments, requiring premature replacement.
- 50–150mm Diameter Coverage: A single mount handles most utility poles, traffic signal supports, and structural columns. Reduces inventory complexity and field-swap friction on large deployments.
- TX30 Thread Interface: Direct integration with Axis cameras—no universal adapters needed. Thread interface resists loosening under wind load and thermal cycling, a minor but real reliability win on exposed installations.
Deployment Considerations:
- Pole surface condition matters: inspect for rust, corrosion, or peeling paint before installation. Strap grip depends on clean, dry contact—rough surfaces are acceptable, but loose paint reduces friction and shifts vibration tolerance downward.
- Weight rating is not published in the available evidence. Heavy PTZ units (5–8kg) or multi-sensor platforms may exceed the design envelope. Verify load capacity with the manufacturer before deployment.
The 01165-001 is most valuable in parking lot, perimeter, and warehouse expansion scenarios where pole mounting eliminates conduit runs and structural drilling. It is not a universal bracket—it is purpose-built for Axis TX30 cameras on standard utility pole diameters. Use it for that, and it will perform reliably. Attempt to adapt it to oversized poles or non-Axis cameras, and you will waste time and money.
