Hanwha SBP-302PM Pole Mount for Bullet Cameras
Overview
The SBP-302PM is a purpose-built pole mount designed to secure Hanwha IP bullet cameras to cylindrical structural elements in outdoor surveillance deployments. This accessory handles the mechanical interface between your camera and poles, posts, or columns with diameters of 80mm or larger, eliminating improvised mounting solutions that compromise sight lines or create maintenance headaches.
Key Features
- 80mm+ Pole Compatibility: Works with standard structural poles and posts found on parking lot perimeters, loading docks, and building corners — no need to source custom mounting plates for common pole sizes.
- Stainless Steel Mounting Straps: Corrosion-resistant fasteners prevent rust and degradation in rain, salt spray, or high-humidity environments. Extends accessory life in weathering cycles without maintenance.
- Dark Gray Finish: Neutral color blends into building exteriors and utility infrastructure, reducing visual clutter compared to bright or reflective mounting hardware.
- Adjustable Camera Angle Positioning: Allows tilting and panning adjustments after installation, letting you dial in coverage angles without dismounting the entire assembly.
- Hanwha Bullet Camera Integration: Factory-designed coupling with Hanwha camera models PNO-9080R, SNO-8081R, SBO-100B1, XNO-8020R, XNO-8030R, XNO-8040R, XNO-8080R, XNO-6085R, XNO-6120R, XNO-6010R, XNO-6020R, and XNO-6080R ensures secure mechanical fit and electrical alignment without adapter plates.
- Professional Appearance: Finished mounting hardware projects a maintained, engineered installation rather than a temporary or ad-hoc setup — important for properties with security visibility standards.
Integration & Compatibility
The SBP-302PM pairs directly with the listed Hanwha bullet camera range. Verify your camera model against the compatibility list before ordering — mounting plates are not interchangeable across brands. If you are deploying mixed-brand camera systems or non-Hanwha bullets, confirm mechanical fit with the camera manufacturer or your systems integrator before committing.
The mount's adjustment range supports standard surveillance sight-line refinement (down-angle adjustment for street-level coverage, slight pan for corner-to-corner perimeter overlap). For complex multi-angle deployments or dynamic repositioning, plan additional labor for angle re-calibration during commissioning.
Deployment Considerations
Pole diameter must be verified before purchase — undersized poles (less than 80mm) will not secure properly, and oversized poles may require spacer plates not included with this mount. Measure pole or column diameter on-site before deployment begins.
Installation requires basic hand tools (typically a wrench or socket set) and is best performed by two technicians — one to hold the camera assembly steady while the other tightens the stainless steel straps. Plan cable routing (PoE or power) before final tightening to avoid pinching network or power conductors.
Frequently Asked Questions
Q: Is the SBP-302PM compatible with non-Hanwha bullet cameras?
A: No. The mount is engineered for the listed Hanwha models. Using it with other brands risks mechanical mismatch, misalignment, or unsafe fastening. Check with your integrator if you need a cross-brand mounting solution.
Q: What is the maximum pole diameter the SBP-302PM can accommodate?
A: The mount supports poles of 80mm diameter or larger. There is no specified upper limit in the available documentation, but very large-diameter poles (e.g., 250mm+) may require extended straps or spacer hardware not included. Verify fit on-site or consult Hanwha technical support for oversized applications.
Q: Can I adjust the camera angle after the mount is installed?
A: Yes. The SBP-302PM supports angle adjustment for fine-tuning coverage after installation, reducing the need for complete remounting during commissioning.
Q: Does the SBP-302PM include cable management or conduit routing?
A: No. Plan PoE or power cable routing separately — the mount provides the mechanical bracket only. Route cables before final tightening to avoid pinch points.
Q: What maintenance does the stainless steel hardware require?
A: Stainless steel straps are corrosion-resistant but not maintenance-free in high-salt or aggressive industrial environments. Inspect fasteners annually and tighten if weathering or vibration loosens the assembly.
Q: Is the SBP-302PM rated for outdoor use?
A: Yes. The dark gray finish and stainless steel straps are designed for outdoor perimeter deployments, parking lots, and building entrances. Standard environmental hardening applies — do not expose to extreme thermal cycling or direct spray wash without first confirming local deployment conditions with Hanwha technical support.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The SBP-302PM is a straightforward mechanical accessory, but that's its strength — it does one job well. Pole mounting is non-negotiable for perimeter surveillance on parking lots, loading docks, and building entry points, and the SBP-302PM (often searched as SBP 302PM) handles the structural interface without surprises. The 80mm+ pole diameter requirement is your primary decision gate; measure before you buy.
Technical Highlights:
- Stainless Steel Mounting Straps: Corrosion resistance extends mount life in salt-spray and high-humidity climates without annual re-tightening cycles. Dark gray finish eliminates bright reflections that draw attention to the mounting hardware.
- Hanwha Camera Integration: Factory-matched coupling with 12 Hanwha bullet models (PNO-9080R, SNO-8081R, SBO-100B1, XNO series) ensures mechanical and electrical alignment without adapter plates or shimming. Cross-brand incompatibility is absolute — confirm your model before order.
- Adjustable Angle Positioning: Post-installation angle refinement reduces remounting labor during final commissioning and allows sight-line tweaks without full disassembly.
Deployment Considerations:
- Pole diameter verification is critical — undersized poles will not clamp securely, and oversized poles may exceed strap reach. Measure on-site before purchasing.
- Two-technician installation is standard practice; one holds the camera steady while the other tightens the stainless steel straps. Cable routing (PoE, power) must be planned before final tightening to prevent pinching.
- No integrated cable management — you'll route PoE or power cables separately, which simplifies future cable replacement but requires upfront planning.
Deploy the SBP-302PM when you have Hanwha bullet cameras, confirmed 80mm+ pole dimensions, and outdoor perimeter coverage targets (parking lots, building corners, entry points). If your pole is undersized or your cameras are a different brand, evaluate alternative mounts or consult your integrator before committing.
