Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Hanwha
SKU: MC06-001150A
Hanwha MC06-001150A Bushing-Cable_xnp-XX00RW
- Cable bushing for Hanwha XNP-series network cameras
- Strain relief at ceiling and rack mounting points
- PoE++ 802.3bt capable for high-power camera installs
$2.92 $1.99 Save $0.93The item has been added -
Hanwha
SKU: EP10-001078A
Hanwha Module,ELECTRONIC-WHO9745CWC10C3.3NR100R
$8.18 $7.99 Save $0.19The item has been added -
Hanwha
SKU: SPI-BRW0
Hanwha Red LED Module Accessory for 6mm lens - SPI-BRW0
- Red LED illumination module for 6mm lens cameras
- Field-configurable expansion for camera upgrades
- Low-power LED minimizes total system draw
$720.00 $469.99 Save $250.01The item has been added -
Hanwha
SKU: SPI-BRM1
Hanwha Red LED Module Accessory for 8mm lens - SPI-BRM1
- Red LED indicator module for 8mm lens cameras
- Field-installable expansion for post-deployment upgrades
- Visible deterrent lighting complements IR illumination
$720.00 $469.99 Save $250.01The item has been added -
Hanwha
SKU: SPP-K004EP
Hanwha RJ45 Push-pull ruggedized Connector Kit compatible with TNP-A6550RW, TNP-A7430RW, TNP-A9430RW
$70.00 $69.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBB-300PMW1
Hanwha SBB-300PMW1 Installation Plate
Aluminum mounting plate for Hanwha PTZ and fixed cameras
- M6 metric screw mount works with standard anchors; no proprietary hardware
- 110 x 181mm compact footprint fits tight spaces without structural drilling
- RAL9003 white powder coat resists corrosion in outdoor and high-humidity zones
In stock · Ships same business day$32.00 $31.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-099HMW
Hanwha SBP-099HMW White Mounting Cap
White aluminum mounting cap for QND/QNF cameras, PF 1 1/2" thread
- RAL9003 powder-coat finish resists corrosion in covered outdoor environments
- Hand-tight PF 1 1/2" mount requires no tools for field installation or removal
- Ø107 × 47mm compact size fits six Hanwha surveillance camera models
In stock · Ships same business day$34.00 $33.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-167HM
Hanwha SBP-167HM Cap Adapter, Ivory
PF 1 1/2" threaded cap adapter for XND-6081V/8081V cameras, ivory
- PF 1 1/2" male thread mount integrates directly with XND series housings
- Ivory finish blends into ceiling and wall installations without visibility
- Precision OEM accessory maintains consistent mechanical tolerances across installs
In stock · Ships same business day$50.00 $49.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-187HM
Hanwha SBP-187HM Cap Adapter, Ivory
PF 1 1/2" cap adapter for XNV-6081/8081 ceiling mounts, ivory
- Standard PF 1 1/2" male thread connects to existing mounting infrastructure
- Ivory finish blends into indoor ceiling grids and light-colored surfaces
- Precision-engineered tolerances prevent play and vibration on mounted camera
In stock · Ships same business day$50.00 $49.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-250HMW
Hanwha SBP-250HMW White Cap Adapter
White aluminum cap adapter for Hanwha PNM ceiling-mount cameras
- PF 1 1/2" male thread mounts directly to conduit and junction boxes
- Aluminum construction resists vibration and temperature cycling
- White finish blends into light ceilings; works with PNM-9084QZ/QZ1/C16083RVQ/C32083RVQ
In stock · Ships same business day$75.00 $74.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-300HMS6
Hanwha SBP-300HMS6 Stainless Steel Cap Adaptor
Stainless steel cap adaptor for XNV-6080RS, XNV-8080RS, XNV-6120RS cameras
- Stainless steel construction resists corrosion in outdoor and indoor environments
- Protects camera optics from weather, UV exposure, dust, and physical damage
- Compatible with three Hanwha professional surveillance camera models
$485.00 $363.99 Save $121.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-315HMW
Hanwha SBP-315HMW White Cap Adapter
White cap adapter for Hanwha dual-sensor cameras with TR20 mount
- Supports PNM-9084RQZ and PNM-9085RQZ multi-sensor platforms
- 6kg load capacity with aluminum construction and RAL9003 white finish
- Compact ø330 x 74mm profile minimizes visual intrusion in flush mounts
In stock · Ships same business day$70.00 $69.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-C15H
Hanwha SBP-C15H 1.5" Thread Coupler White 4-Pack
1.5" PF thread coupler 4-pack for ceiling mount assemblies, white aluminum
- 1.5" PF-to-PF threading connects bases to adaptors without reducers or custom work
- Lightweight aluminum at 115g per unit resists corrosion in indoor installations
- White RAL 9003 finish blends with ceiling tile and drywall in office environments
$80.00 $79.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-C15P
Hanwha SBP-C15P Ceiling Mount Coupler
Aluminum ceiling threaded coupler for extended camera positioning
- Aluminum ceiling mount coupler for indoor Hanwha cameras
- Corrosion-resistant body resists oxidation indoors
- Direct-fit coupler for climate-controlled environments
In stock · Ships same business day$20.00 $19.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-HCFW
Hanwha SBP-HCFW 1.5 Inch Coupler White
1.5" NPT steel coupler, 500 lb capacity, white epoxy finish
- 1.5" NPT thread compatible for standard camera pole and conduit connections
- Steel construction with scratch-resistant epoxy powder coat withstands outdoor deployment
- 500 lb weight capacity supports camera housings, mounts, and associated hardware
In stock · Ships same business day$15.00 $14.99 Save $0.01The item has been added -
Hanwha
SKU: Z6003013801A
Hanwha Screw Taptite - Z6003013801A
- OEM taptite screw for Hanwha camera housings
- Thread-forming design eliminates pre-tapping in metal
- Reduces install time for camera service workflows
$0.99The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.