Ubiquiti UACC-AOC-SFP10-10M 10 Gigabit Active Optical Cable
Overview
The UACC-AOC-SFP10-10M is a 10-meter active optical cable (AOC) designed to carry 10 Gbps traffic between network infrastructure equipped with SFP+ transceivers. This model bridges the distance gap where standard copper direct attach cables reach their limits — copper DACs typically max out at 7 meters without signal degradation, but the UACC-AOC-SFP10-10M extends that reach to 10 meters while maintaining full 10 Gbps throughput and delivering minimal latency. For integrators deploying Ubiquiti network switches across larger cabinets, equipment rooms, or modest building backbone runs, this cable eliminates the need for costly transceivers or intermediate active electronics.
Key Features & Specifications
- 10 Gigabit Throughput (10GBase-AOC): Delivers the full 10 Gbps bandwidth — critical for backbone links aggregating multiple gigabit camera streams or connecting NVRs to core switching fabric without bottlenecks.
- 10-Meter Length: Reaches across large equipment rooms or network closets without signal loss. This distance is sufficient for most enterprise deployments but falls short of 30+ meter runs — plan your cabinet layout accordingly.
- SFP+ Connectors (Both Ends): Direct compatibility with all Ubiquiti switches and routers in the UniFi and EdgeMax lines that feature SFP+ ports. No transceiver or media converter required — connect and deploy immediately.
- Active Optical Design: Unlike passive copper DACs, active optics use integrated electronics to boost and regenerate the signal, which is why they achieve longer reach. Trade-off: marginally higher cost than copper, but eliminates transceiver licensing fees if you deploy multiple cables.
- Aqua Cable Jacket: The color coding aids installation — instant visual confirmation you're handling a 10G optical link, not a 1G copper alternative.
- No Additional Power or Configuration: Inserts into SFP+ ports like any passive cable. The AOC's integrated driver draws power directly from the port — no separate 5V or 12V supply needed, no firmware updates, no handshake protocol. Plug and go.
Integration & Compatibility
The UACC-AOC-SFP10-10M integrates with all Ubiquiti EdgeMax and UniFi switching platforms that expose SFP+ uplink ports. Common deployment scenarios include aggregating multiple gigabit PoE switch uplinks into a 10G backbone (reducing oversubscription on core links), or linking a dedicated network video recorder with high-throughput storage requirements directly to a core switch. Verify your target switch or router datasheet confirms SFP+ port availability before ordering — not all models in the Ubiquiti lineup include optical uplinks.
When to Choose a Different Option
If your run is under 7 meters and cost is the primary driver, passive copper DACs (typically 3–5 meters) are cheaper and eliminate the active electronics. If you need runs exceeding 15 meters, investigate Ubiquiti's QSFP+ infrastructure or consider deploying intermediate switches to segment the backbone. For non-Ubiquiti gear, confirm SFP+ transceiver compatibility before purchase — this cable is optimized for Ubiquiti ports but adheres to industry-standard 10GBase-AOC pinouts.
