Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: KIT-905
STI KIT-905 Clear 1.25" Spacer for STI-9105
- Maintains precise strike-to-frame gap on STI-9105 installs, preventing binding and misalignment.
- Clear polycarbonate construction allows visual latch alignment verification during install and service.
- Compensates for frame-to-jamb depth variations up to 1.25" in standard commercial door openings.
$23.11 $22.99 Save $0.12The item has been added -
STI
SKU: KIT-DV16
STI KIT-DV16 Nylon Condensation Drain Vent 16mm
16mm nylon drain vent for HID access control moisture management
- 16mm nylon vent removes condensation from door strikes and reader housings
- Compatible with HID credential-based access control systems at 9VDC
- Nylon construction resists chemicals in indoor access control installations
$19.74 $18.99 Save $0.75The item has been added -
STI
SKU: KIT-E02111PCB
STI KIT-E02111PCB Stopper Station Shield Piezo Sounder
9VDC piezo sounder for HID access control door strikes
- Audible alert signaling integrated into door strike and lock assemblies
- 9VDC operation compatible with standard access control power supplies
- Stopper station shield configuration for multi-door secure entry points
$37.60 $36.99 Save $0.61The item has been added -
STI
SKU: KIT-E06402
STI KIT-E06402 Exit Stopper Red Reed Switch
Reed switch exit stopper for HID access control at 9VDC
- Reed switch strike provides door position feedback with electromagnetic locking
- Operates at 9VDC for integration with standard HID access control panels
- Wall-mounted design suits retrofit and new installation controlled egress applications
$18.69 $17.99 Save $0.70The item has been added -
STI
SKU: KIT-E10147
STI KIT-E10147 White 24 Volt LED for UB-1 and UB-2
- Provides instant visual lock-status confirmation on STI UB-1 and UB-2 electric strikes.
- Runs on 24VDC, integrating directly into existing commercial access control power circuits.
- White LED indicator eliminates log pulls during on-site strike troubleshooting and maintenance.
$11.75 $10.99 Save $0.76The item has been added -
STI
SKU: KIT-E10196
STI KIT-E10196 N.O. Contact Stopper Station Series
- Operates at 9VDC N.O. contact for direct integration with standard access control panels.
- HID-compatible credential reader support simplifies deployment in existing HID-based systems.
- Four-point frame mounting with included wall fixings enables straightforward door frame installation.
$10.58 $9.99 Save $0.59The item has been added -
STI
SKU: KIT-E10197H
STI KIT-E10197H Contact Switch Holder for Stopper® Station
Contact switch holder for STI Stopper stations with HID card reader support
- Integrates HID credential readers with electronic strike activation at 9VDC
- Designed for STI Stopper door security station systems and retrofit applications
- Contact switch holder enables access control workflows across multiple entry points
$37.60 $36.99 Save $0.61The item has been added -
STI
SKU: KIT-E10198
STI KIT-E10198 N.C. Contact Stopper Station Push Button
- N.C. contact design delivers momentary egress release on 9VDC strike circuits.
- Integrates with HID-based access control platforms and standard strike modules.
- Accessory-only hardware wires directly into existing strike control circuits.
$10.58 $9.99 Save $0.59The item has been added -
STI
SKU: KIT-EA135
STI KIT-EA135 Deactivation Pin HID Credential Lock
Electromechanical deactivation pin strike for HID credential access control
- 9VDC operation integrates with HID-based readers and access control panels
- Single or multi-door wall-mount installation for commercial security deployments
- Credential verification required before strike activation on each access attempt
$5.29 $4.99 Save $0.30The item has been added -
STI
SKU: KIT-G01307
STI KIT-G01307 Replacement Gasket for Universal Stopper Spacer
- Designed for STI universal stopper spacer strikes in HID-based access control systems.
- Rated for 9VDC strike systems, ensuring compatibility with existing low-voltage door hardware.
- Genuine replacement part simplifies maintenance without full strike assembly replacement.
$16.45 $15.99 Save $0.46The item has been added -
STI
SKU: KIT-G01331
STI KIT-G01331 Replacement Gasket for Universal Stopper Spacer
- Restores compression seal on 9VDC universal stopper spacer assemblies to stop water ingress.
- Compatible with STI Weather Stopper II and Stopper II strike systems using universal spacer design.
- Fits four-screw stopper frames (7mm holes); blanks unused cable entries to seal surface-mount installs.
$16.45 $15.99 Save $0.46The item has been added -
STI
SKU: KIT-G3-A-EN
STI KIT-G3-A-EN Audio/Visual Tamper Alert Kit
- 120 dB integrated sounder delivers immediate audible tamper alerts without audio wiring.
- Runs on 9VDC, compatible with STI Stopper II and Weather Stopper II protective covers.
- Battery-powered sounder module mounts over existing strike hardware using four fixed points.
$58.75 $57.99 Save $0.76The item has been added -
STI
SKU: KIT-G629761
STI KIT-G629761 Cord Gasket for STI-1210A/STI-1221A
Cord gasket assembly for STI-1210A/1221A electric strikes at 9VDC
- Cable routing and environmental sealing at strike interface
- Direct fit for STI-1210A and STI-1221A lock/strike models
- Cord gasket construction rated for 9VDC access control systems
$15.28 $14.99 Save $0.29The item has been added -
STI
SKU: KIT-GLR-BB-0
STI KIT-GLR-BB-0 Red GLR Backbox Kit with ½" NPT Plug
- TCP/IP communication support enables seamless integration into networked access control systems.
- Native HID credential reader compatibility simplifies deployment in existing HID-based installations.
- ½" NPT plug and 9VDC operation suit standard commercial electric strike mounting configurations.
$15.87 $14.99 Save $0.88The item has been added -
STI
SKU: KIT-GLR-BB-2
STI KIT-GLR-BB-2 Yellow GLR Backbox Kit with ½" NPT Plug
- Designed for GLR electromagnetic strike installations in commercial access control systems.
- Operates at 9V DC, aligning with standard door strike circuit requirements.
- Includes ½" NPT plug for direct conduit integration into wired security architectures.
$15.87 $14.99 Save $0.88The item has been added -
STI
SKU: KIT-GLR-BB-3
STI KIT-GLR-BB-3 White GLR Backbox Kit with ½" NPT Plug
White GLR backbox kit for HID credential readers on TCP/IP networks
- Mounts GLR credential reader platform with ½" NPT plug integration
- Operates on 9VDC power over TCP/IP networked access control systems
- Includes white backbox assembly and NPT plug for door-level installations
$15.87 $14.99 Save $0.88The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.