Refine by

No filters applied

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

Sub categories

Compliance & Site Essentials

9 items

Connectivity & Media

785 items

Covers & Protection

778 items

Electrical & Power

402 items

Installation Hardware & Kits

444 items

Mounting Brackets & Kits

2310 items

Software & Licenses

79 items

Showing Results for Accessories

Compare

Out of stock
STI

SKU: STI-8101

STI STI-8101 2" Conduit Spacer for STI-8100 Series

2" conduit spacer for STI-8100 series 9VDC strike systems
Special Order · Ships in 2-3 weeks

$15.33 $9.99 Save $5.34

Add to Cart
The item has been added
Free shipping over $499

$15.33 $9.99 Save $5.34

Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-8230-SS

STI STI-8230-SS Smoke Detector Damage Stopper with Conduit Spacer

Stainless steel smoke detector guard with integrated conduit spacer
In stock · Ships same business day

$164.50 $104.99 Save $59.51

Add to Cart
The item has been added
Free shipping over $499

$164.50 $104.99 Save $59.51

Add to cart Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9102

STI STI-9102 Small Thermostat Protector Flush Mount with Lock

Flush-mount thermostat lock for controlled HVAC access in commercial buildings
Special Order · Ships in 2-3 weeks

$28.18 $27.99 Save $0.19

Add to Cart
The item has been added
Free shipping over $499

$28.18 $27.99 Save $0.19

Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-9105

STI STI-9105 Thermostat Protector with Key Lock

Keyed thermostat enclosure prevents unauthorized HVAC adjustments
In stock · Ships same business day

$31.64 $20.99 Save $10.65

Add to Cart
The item has been added
Free shipping over $499

$31.64 $20.99 Save $10.65

Add to cart Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9110

STI STI-9110 Thermostat Protector with Key Lock

Mechanical key-lock thermostat protector for HVAC access control
Special Order · Ships in 2-3 weeks

$41.36 $26.99 Save $14.37

Add to Cart
The item has been added
Free shipping over $499

$41.36 $26.99 Save $14.37

Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-9601-SS

STI STI-9601-SS Steel Web Stopper Low Profile Flush Mount Controller

Stainless steel flush-mount controller shields smoke detectors from tampering
In stock · Ships same business day

$82.25 $81.99 Save $0.26

Add to Cart
The item has been added
Free shipping over $499

$82.25 $81.99 Save $0.26

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-9604

STI STI-9604 Steel Web Stopper for Mini Smoke Detectors

Patented steel web lock for mini smoke detectors in institutional settings
In stock · Ships same business day

$46.98 $30.99 Save $15.99

Add to Cart
The item has been added
Free shipping over $499

$46.98 $30.99 Save $15.99

Add to cart Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9609

STI STI-9609 Steel Web Stopper High Profile Flush Mount

Steel flush mount strike for severe-abuse door security in commercial settings
Special Order · Ships in 2-3 weeks

$46.98 $45.99 Save $0.99

Add to Cart
The item has been added
Free shipping over $499

$46.98 $45.99 Save $0.99

Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-9610

STI STI-9610 Steel Web Stopper High Profile Surface Mount

Steel web stopper strike protector for high-abuse environments, surface mount
In stock · Ships same business day

$51.63 $50.99 Save $0.64

Add to Cart
The item has been added
Free shipping over $499

$51.63 $50.99 Save $0.64

Add to cart Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9618

STI STI-9618 Motion Detector Damage Stopper Corner Mount

Corner mount damage stopper for STI motion detectors in high-traffic areas
Special Order · Ships in 2-3 weeks

$32.95 $31.99 Save $0.96

Add to Cart
The item has been added
Free shipping over $499

$32.95 $31.99 Save $0.96

Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9619

STI STI-9619 Motion Detector Damage Stopper Corner Mount

Corner mount impact protection for motion detectors in high-traffic areas
Special Order · Ships in 2-3 weeks

$52.39 $51.99 Save $0.40

Add to Cart
The item has been added
Free shipping over $499

$52.39 $51.99 Save $0.40

Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9620

STI STI-9620 Motion Detector Damage Stopper

Electronic strike assembly for access control door systems
Special Order · Ships in 2-3 weeks

$34.34 $21.99 Save $12.35

Add to Cart
The item has been added
Free shipping over $499

$34.34 $21.99 Save $12.35

Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-9621

STI STI-9621 Motion Detector Damage Stopper Strike

Motion-integrated damage stopper strike for high-impact access control
In stock · Ships same business day

$50.79 $35.99 Save $14.80

Add to Cart
The item has been added
Free shipping over $499

$50.79 $35.99 Save $14.80

Add to cart Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9622

STI STI-9622 Motion Detector Damage Stopper

Motion detector strike for forced-entry protection on access doors
Special Order · Ships in 2-3 weeks

$49.52 $34.99 Save $14.53

Add to Cart
The item has been added
Free shipping over $499

$49.52 $34.99 Save $14.53

Add to quote Compare
Compare

Add to Cart The item has been added
STI

SKU: STI-9623

STI STI-9623 Beam Smoke Damage Stopper Controller

Beam smoke detection controller with 940nm IR and dual fire/smoke analytics
In stock · Ships same business day

$50.95 $32.99 Save $17.96

Add to Cart
The item has been added
Free shipping over $499

$50.95 $32.99 Save $17.96

Add to cart Add to quote Compare
Compare

Out of stock
STI

SKU: STI-9636

STI STI-9636 Clock/Bell Damage Stopper Protective Guard

Impact-resistant guard shields STI clocks and bells from damage
Special Order · Ships in 2-3 weeks

$77.70 $49.99 Save $27.71

Add to Cart
The item has been added
Free shipping over $499

$77.70 $49.99 Save $27.71

Add to quote Compare

Browse by Product Family

Every outdoor deployment starts with form-factor selection. Click through to shop the families that fit your scene.

Mounting Brackets & Kits

Wall, pole, corner, pendant, and ceiling mounts for every major camera brand.

Enclosures & Housings

Weatherproof camera housings, NEMA enclosures for outdoor gear, vandal-resistant boxes.

Lenses (C/CS-Mount)

Fixed and varifocal lenses for box cameras — 2.8mm wide-angle to 150mm telephoto.

IR Illuminators

850nm and 940nm supplemental IR for long-range or covert night-vision applications.

Power Supplies & Adapters

12VDC, 24VAC/DC, and PoE injectors for cameras and site-installed surveillance gear.

Cables & Connectors

RJ45 patch cords, BNC coax, RG59/RG6, pigtails, and waterproof Ethernet boots.

Heaters, Wipers & Sun Shields

Cold-weather heater accessories, windshield wipers for marine/industrial, sun shrouds.

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Top Brands for Outdoor Deployments

Click through to each brand's engineering profile, product range, and NDAA compliance status.

Axis Communications

OEM brackets, enclosures, and pendant kits engineered for every Axis camera

Hanwha Vision

SBP and SHB series accessories for Wisenet camera families

Altronix

UL-listed 12V/24V camera power supplies with battery backup

Bosch

Outdoor housings and mounts for DINION and FLEXIDOME cameras

Pelco

EM-series pole mounts, pendant adapters, and outdoor enclosures

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Related Categories

Adjacent equipment that typically ships together with outdoor IP cameras.

Mounting Brackets & Kits Enclosures & Housings C/CS-Mount Lenses IR Illuminators Power Supplies Cables & Connectors IP Cameras Infrastructure Access Control Power Supplies

Engineering Reading

Deep-dives from our engineering team on camera deployment planning.

Pixel Density + DORI: Engineering Coverage Stop Buying Megapixels: Engineering Coverage Why 4K Cameras Fail at Night PoE Budget Planning How Many Security Cameras Do I Actually Need?