Accessories
Sub categories
Showing Results for Accessories
-
Kantech
SKU: ADVER30R5H3G
Kantech VideoEdge 3U Hybrid 32-Channel 30TB NVR
32-channel hybrid NVR with 30TB RAID storage in 3U rackmount
- 3U hybrid NVR runs 32 analog + 32 IP channels at once
- 30TB storage onboard for medium-large surveillance sites
- Rack-mount with RS-232 and IP/Ethernet for VMS integration
$29,968.50 $19,939.99 Save $10,028.51 -
Lantronix
SKU: E-MCR-05-NA
Lantronix E-MCR-05-NA 12-Slot Rack Mounting Chassis
12-slot 1RU chassis for mixed fiber-to-copper media conversion
- 12-slot media converter rack-mount chassis
- Mix protocols and speeds in one 19-inch chassis
- TAA-compliant for federal procurement
$490.00 $373.99 Save $116.01 -
Lantronix
SKU: IONRE-23
Lantronix IONRE-23 ION Rack Mount Ears
19-inch rack mount ears for Lantronix ION series devices
- 19-inch rack mount ears for ION series equipment
- Standard server rack installation for ION switches
- 1.25 lb mounting hardware accessory
$30.00 $29.99 Save $0.01 -
Lenovo
SKU: 00KF009
Lenovo 00KF009 10M MELLANOX Active IB FDR Optical Fiber
In stock · Ships same business day$872.99 -
Lenovo
SKU: 4X97A81810
Lenovo 4X97A81810 Thinkedge SE450 GPU Power Cable
In stock · Ships same business day$198.99 -
Lenovo
SKU: 4Z57A10846
Lenovo 4Z57A10846 LC-LC OM4 MMF Cable
In stock · Ships same business day$117.99 -
Lenovo
SKU: 4Z57A10847
Lenovo 4Z57A10847 3m LC-LC OM4 MMF Cable
In stock · Ships same business day$138.99 -
Lenovo
SKU: 4Z57A10848
Lenovo 4Z57A10848 LC-LC OM4 MMF Cable
In stock · Ships same business day$298.99 -
Lenovo
SKU: 7Z57A04256
Lenovo 7Z57A04256 Active Optical Cable
In stock · Ships same business day$789.00 $689.99 Save $99.01 -
Lenovo
SKU: 7Z57A03567
Lenovo Pwrc Lenovo 5M Mpo-mpo OM4 MMF Cable - 7Z57A03567
In stock · Ships same business day$208.99 -
Lenovo
SKU: 4Z57A60816
Lenovo ST650 V2 RTX A6000 GPU Power Cable KIT - 4Z57A60816
In stock · Ships same business day$183.99 -
Lifesafety Power
SKU: AC-CABLE-4-FEET-BOXED-SET-OF-2
Lifesafety Power AC-Cable-4-Feet-Boxed-Set-Of-2 AC-Cable-4-Feet-B
- Four-foot length suits standard rack or wall-mount AC runs without excess slack.
- Two-unit boxed set supports redundancy planning or simultaneous multi-device deployment.
- Designed for Lifesafety Power supplies and control modules requiring AC mains connection.
$57.00 $56.99 Save $0.01 -
Lifesafety Power
SKU: BX75-C8D8E1
Lifesafety Power BX75-C8D8E1 8 relay lock control outputs fused
- 8 independently fused 3A relay outputs prevent a single lock fault from cascading.
- Per-output FAI selection enables fail-safe or fail-secure logic without rewiring.
- 8 auxiliary DC outputs (3A each, Bus1/Bus2 selectable) support status indicators per door.
$744.00 $488.99 Save $255.01 -
Lifesafety Power
SKU: E6S1-BOXED
Lifesafety Power E6S1-BOXED Software House Boxed Power Systems 0W
- Accepts 120VAC input for direct integration with standard North American electrical supply.
- Boxed form factor supports wall or cabinet mounting in equipment rooms and closets.
- Designed for Software House ecosystems, consolidating power distribution in one enclosure.
$1,355.00 $889.99 Save $465.01 -
Lifesafety Power
SKU: E8S-BOXED
Lifesafety Power E8S-BOXED Software House Boxed Power Systems 0W
- Accepts 120 VAC, 50/60 Hz single-phase input for standard branch circuit integration.
- Distributes 24 VDC output across multiple protected circuits from one centralized unit.
- Designed for Software House panels, eliminating daisy-chained AC runs in control rooms.
$1,437.00 $943.99 Save $493.01 -
Lifesafety Power
SKU: E8V-BOXED
Lifesafety Power E8V-BOXED Enclosure. E8 36" X 30" X6-1/2" Blk
- 36"×30"×6.5" profile fits standard 16" and 24" stud-center wall cavities.
- Vertx back plate supports 35mm DIN rail, M5/M6 fasteners for organized terminations.
- Top and side knockouts accept conduit entries up to 1.5" NPT for clean cable routing.
$1,434.00 $941.99 Save $492.01
Accessories
Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.
Deployment Considerations
- Environmental protection and weather resistance
- Mounting stability and load support
- Power and voltage compatibility
- Cable management and termination quality
- Compliance with local safety standards






