IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
STI

SKU: STI-4100EM

STI STI-4100EM Break Glass Stopper Large Emergency

Large break glass stopper for emergency egress and manual override
- Integrates with standard door strike assemblies and panic hardware
- Wall-mounted design for commercial buildings and secured facilities
- Meets life safety codes and building standards for emergency access
Special Order · Ships in 2-3 weeks

$87.59 $59.99 Save $27.60

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-4130

STI STI-4130 Break Glass Stopper Large with Spacer

Large break-glass stopper with integrated spacer for emergency egress
- Integrated spacer design for reliable activation in life safety applications
- Wall-mounted assembly compatible with STI emergency access systems
- Standard electrical backing and mounting hardware for straightforward installation
Special Order · Ships in 2-3 weeks

$72.85 $46.99 Save $25.86

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6200

STI STI-6200 Theft Stopper Lock Strike

Compact 9VDC electric strike for standard door frames
- 9VDC alkaline battery powered, operates without building power
- 5" W x 5" H x 2" D compact form fits standard door installations
- Compatible with access control systems outputting 9VDC signals
Special Order · Ships in 2-3 weeks

$44.63 $28.99 Save $15.64

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6200R

STI STI-6200R Theft Stopper 12V Powered Horn Strike

12VDC electromagnetic strike with integrated horn for access control
- Combines powered strike lock with audible horn output in single unit
- 12VDC operation integrates with standard access control systems
- Designed for coordinated door control and deterrent alerting
Special Order · Ships in 2-3 weeks

$74.03 $47.99 Save $26.04

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6200WIR

STI STI-6200WIR Wireless Theft Stopper Lock

Wireless lock strike with push-button control, 12VDC powered
- Pairs with STI-34601 wireless doorbell button for credential-free access
- Works in retrofit and new-build installations without hardwired readers
- 12VDC operation integrates into wireless access control systems
Special Order · Ships in 2-3 weeks

$100.14 $68.99 Save $31.15

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6254

STI STI-6254 Cabinet Alarm Lock/Strike

Proximity cabinet lock/strike for multi-door security applications
- Reed switch and magnet activation supports up to 31 doors per system
- 9VDC alkaline power with compact 3.37" W × 1" D footprint for cabinet mounting
- Proximity-based reader eliminates mechanical keys for access control
Special Order · Ships in 2-3 weeks

$44.04 $27.99 Save $16.05

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-6518

STI STI-6518 Bopper Stopper® Reader with Spring Loaded Hinge

Dual fingerprint + PIN reader with spring-loaded hinge rated 50,000+ cycles
- Biometric fingerprint and numeric PIN in one door-mounted unit
- Spring-loaded mechanism maintains consistent actuation across high-traffic use
- Configurable single-factor or multi-factor authentication modes
In stock · Ships same business day

$37.53 $24.99 Save $12.54

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6518-FR

STI STI-6518-FR Bopper Stopper Reader with Spring Loaded Hinge

Fingerprint + PIN biometric reader with spring-loaded hinge for access control
- Hybrid authentication combines fingerprint biometric scanning with PIN keypad entry
- TCP/IP network communication integrates into distributed control systems without dedicated wiring
- Spring-loaded hinge design simplifies mounting and adjustment in standard panel installations
Special Order · Ships in 2-3 weeks

$37.53 $23.99 Save $13.54

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6519-FR

STI STI-6519-FR Single-Gang Protective Cover

Single-gang protective cover for networked access control at 9VDC
- TCP/IP communication integrates with access control systems over standard network infrastructure
- Wall plate/door frame mount fits single-gang installations in standard electrical openings
- 9VDC operating voltage compatible with common 12VDC and 24VDC regulated power supplies
Special Order · Ships in 2-3 weeks

$29.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-6520-C

STI STI-6520-C Bio Protector Identification Reader Cover

Protective cover for biometric fingerprint readers in outdoor and high-traffic access control
- Shields fingerprint sensors from dust, moisture, and oils to reduce cleaning cycles and maintain enrollment accuracy
- Compatible with HID credentials (proximity, smart card, mobile) across TCP/IP and RS-232 deployments
- Retrofit mounts on existing STI biometric and keypad readers without firmware changes or reconfiguration
In stock · Ships same business day

$50.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6521-C

STI STI-6521-C Bopper Stopper Keyless Lock Reader

Multimodal reader with fingerprint, keypad, and HID for flexible access
- Fingerprint biometric + keypad + HID credential support in one reader
- TCP/IP and RS-232 connectivity for existing networked access systems
- Wired installation with integrated power and data, multiple auth policies per door
Special Order · Ships in 2-3 weeks

$34.48 $23.99 Save $10.49

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6522-C

STI STI-6522-C Bopper Stopper Clear Biometric Keypad Reader

Fingerprint + keypad reader with clear housing and dual authentication
- Dual-mode authentication combining fingerprint recognition with keypad entry
- TCP/IP and RS-232 connectivity for integration into HID-based access control
- Clear polycarbonate housing allows visual inspection of status and components
Special Order · Ships in 2-3 weeks

$39.86 $27.99 Save $11.87

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6522-S

STI STI-6522-S Bopper Stopper Biometric Reader

Fingerprint + PIN dual-factor reader for access control door entry
- Fingerprint recognition with integrated keypad for two-factor authentication
- Standalone or multi-reader infrastructure compatible with door control systems
- IR low-light capability with mounting frame for direct installation
Special Order · Ships in 2-3 weeks

$41.86 $28.99 Save $12.87

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-6580

STI STI-6580 12-Volt Heater Kit

9VDC heater for STI locks & strikes in cold climates
- 9VDC operation integrates with standard access control power rails
- Compact retrofit design fits existing strike box housings
- Prevents frost buildup in solenoid cavities and striker plungers
In stock · Ships same business day

$117.50 $73.99 Save $43.51

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6700

STI STI-6700 Break Glass Stopper Keys Under Glass

Under-glass break stopper key for manual emergency access override
- Mechanical failsafe operation independent of electronic systems
- Mounts under glass in STI emergency access enclosures
- Compliant with life safety codes for emergency egress requirements
Special Order · Ships in 2-3 weeks

$54.05 $34.99 Save $19.06

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6931

STI STI-6931 Call Point Stopper Surface Mount Lock

Surface mount strike for access control & secure entry doors
- 6 x 1.5" screw-mounted strike sized for standard door frame installations
- Integrates into multi-door access control systems for coordinated locking
- Wall-mounted design with 3.5" depth for mechanical door security applications
Special Order · Ships in 2-3 weeks

$43.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

STI STI-4100EM Break Glass Stopper Large Emergency

STI STI-4130 Break Glass Stopper Large with Spacer

STI STI-6200 Theft Stopper Lock Strike

STI STI-6200R Theft Stopper 12V Powered Horn Strike

STI STI-6200WIR Wireless Theft Stopper Lock

STI STI-6254 Cabinet Alarm Lock/Strike

STI STI-6518 Bopper Stopper® Reader with Spring Loaded Hinge

STI STI-6518-FR Bopper Stopper Reader with Spring Loaded Hinge

STI STI-6519-FR Single-Gang Protective Cover

STI STI-6520-C Bio Protector Identification Reader Cover

STI STI-6521-C Bopper Stopper Keyless Lock Reader

STI STI-6522-C Bopper Stopper Clear Biometric Keypad Reader

STI STI-6522-S Bopper Stopper Biometric Reader

STI STI-6580 12-Volt Heater Kit

STI STI-6700 Break Glass Stopper Keys Under Glass

STI STI-6931 Call Point Stopper Surface Mount Lock

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading