Lifesafety Power · E4A-BACKPLATE-ONLY

Lifesafety Power E4A-BACKPLATE-ONLY Backplate for E4A enclosure

• Replacement backplate assembly restores E4A enclosure functionality without full unit swap.
• Designed for E4A series ensuring precise mechanical fit and correct electrical alignment.
• Supports access control, alarm, and backup battery staging deployments at 230 VAC installations.

Lifesafety Power · E4M-BACKPLATE-ONLY

Lifesafety Power E4M-Backplate-Only E4M Back Plate Only

• Aluminum construction provides durable mounting for Mercury panels and FlexPower modules.
• Supports single and dual voltage configurations, enabling flexible power system design.
• Removable design simplifies replacement or expansion without specialized tooling.

Lifesafety Power · E8V-BOXED

Lifesafety Power E8V-BOXED Enclosure. E8 36" X 30" X6-1/2" Blk

• 36"×30"×6.5" profile fits standard 16" and 24" stud-center wall cavities.
• Vertx back plate supports 35mm DIN rail, M5/M6 fasteners for organized terminations.
• Top and side knockouts accept conduit entries up to 1.5" NPT for clean cable routing.

Lifesafety Power · F8P-BOXED

Lifesafety Power F8P-BOXED Voltage-Based Lock Power Module

• Isolates lock power from controller circuits, preventing maglock dropout under load.
• Operates on 230 VAC; integrates into standard electrical enclosures via wall or DIN-rail.
• Supports multiple maglocks and electronic strikes from one regulated source per enclosure.

Lifesafety Power · FPO250/250-2D82F8E2

Lifesafety Power FPO250/250-2D82F8E2 Sixteen Door Access Control

• Dual 12V/24V rails at 250W each power mixed-voltage door hardware from one enclosure.
• Supports up to 16 doors including EM locks, readers, RTE sensors, and strike plates.
• Independent rail design isolates faults — an overloaded 24V channel won't drop 12V egress locks.

Lifesafety Power · FPO75-C4E1

Lifesafety Power FPO75-C4E1 4 Door Access Control 4 Lock Outputs

• Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
• 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
• DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.

Lifesafety Power · FPO75/150-C4D8E1

Lifesafety Power FPO75/150-C4D8E1 Four Door Access Control 1224V

• Dual 12V and 24V rails power mixed-voltage locks and readers from one chassis.
• 75W budget supports four doors; single DIN-rail or wall-mount chassis cuts cabinet clutter.
• Continuous-duty passive cooling suits 24/7 access control without active fan maintenance.

Lifesafety Power · R8-BOXED

Lifesafety Power R8-BOXED Lock output module 8 outputs

• Eight individually fused 12VDC/3A outputs isolate faults so one shorted lock can't take down adjacent doors.
• Per-output failsafe/fail-secure jumper selection lets you match egress or security requirements door by door.
• FAI supervision detects open circuits, shorts, and supply faults and propagates alerts to the host panel instantly.

Lifesafety Power · RC150-C16

Lifesafety Power RC150-C16 rack mount DC lock control 12V@12A Or2

• 16 independently supervised outputs isolate faults without disrupting other lock circuits.
• Dual-voltage operation: 12VDC @ 12A or 24VDC @ 6A suits mixed door hardware installs.
• 19-inch rack-mount form factor centralizes lock power across multi-door enterprise deployments.

Lifesafety Power · RGM-D8PZ1

Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer

• Mounts up to four Lenel access control panels on a removable backplate in 2U space.
• 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
• Integrated lockset and wire management arm reduce tampering risk and cable strain.

Lifesafety Power · RGM-X-BOXED

Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black

• Mounts in standard 19-inch racks, occupying only 2U of vertical space.
• Pull-out drawer design provides direct access to internal components during maintenance.
• Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.

Napco · GEM-EZM8

Napco GEM-EZM8 Access Control Module

Distributed access processor for multi-door commercial systems with card and PIN

• GEM-EZM8 access control module for credential validation
• Card and PIN with Wiegand/Serial reader support
• Local door strike decisions in milliseconds

Napco · GEM-K1CA

Napco GEM-K1CA Keypad Reader with Dual-Line Display

Menu-driven keypad reader with dual-line display for PIN-based access control

• GEM-K1CA keypad reader with 32-char backlit display
• Dual-line display for prompt + status messaging
• Direct-fit for Napco access control panels

Napco · GEM-K1VPS

Napco GEM-K1VPS Backlit Alphanumeric Keypad Reader

Backlit alphanumeric LCD keypad for Napco GEM access control

• GEM-K1VPS keypad reader with backlit alphanumeric LCD
• Auto-sensing dim mode for variable lighting
• Custom prompts reduce user confusion and support calls

Napco · GEM-K4RF

Napco GEM-K4RF Keypad Reader

Large-display PIN keypad reader for Napco control panel integration

• GEM-K4RF keypad reader with large backlit English display
• PIN entry for parking and exterior entry points
• Clear visibility in low-light environments

Napco · GEM-P3200

Napco GEM-P3200 Keypad Reader

PIN keypad reader for Napco systems—no cards or biometrics needed

• GEM-P3200 keypad reader with PIN-only credential entry
• Numeric/alphanumeric code entry at door
• Centralized Napco panel code management

Napco · GEM-P801

Napco GEM-P801 Keypad Reader

PIN keypad reader for Napco GEM access control systems

• GEM-P801 RP8 numeric keypad reader for door entry
• PIN credential entry with Napco GEM compatibility
• Multi-reader door access integration

Napco · GEM-P816

Napco GEM-P816 Keypad Reader

PIN keypad reader for Napco access control systems

• GEM-P816 keypad reader with PIN entry capability
• Numeric/employee ID credential sequences
• Door-level access control for Napco systems

Napco · GEM-P9600

Napco GEM-P9600 PIN Keypad Reader for Access Control

Numeric PIN keypad reader for Napco GEM access control systems

• GEM-P9600 PIN keypad reader with RS-232 serial
• Deterministic wired comms for access control
• Eliminates lost-card credential replacement overhead

Napco · GEM-PIR

Napco GEM-PIR Motion Sensor Detector

Wireless PIR motion sensor for Napco systems with battery-saver mode

• GEM-PIR PIR motion sensor with auto temp compensation
• Battery-saver feature for extended deployment
• Direct-fit Napco panel integration with screws included

Napco · GEM-RP1CAE2

Napco GEM-RP1CAE2 Keypad Access Control Reader

Keypad reader with 32-character display for PIN and hybrid card access

• GEM-RP1CAE2 keypad with 32-char backlit dual-line display
• Real-time status feedback at the reader directly
• PIN credential entry for Napco access systems

Napco · GEM-RP2ASE2

Napco GEM-RP2ASE2 Keypad Reader

Wall-mount keypad reader with backlit display for PIN entry

• GEM-RP2ASE2 keypad with backlit alphanumeric symbol LCD
• PIN entry with visible feedback in variable lighting
• Direct-fit Napco access control reader

Napco · GEM-RP3DGTL

Napco GEM-RP3DGTL Digital Keypad Reader

PIN keypad reader for Napco GEM panels with dual 7-segment display

• GEM-RP3DGTL digital keypad with dual 7-segment display
• Clear PIN-entry status indication for users
• Direct-fit Napco access control reader

Napco · GEM-TRANS2

Napco GEM-TRANS2 Keypad Reader

PIN keypad reader with reversible mounting for left or right installation

• GEM-TRANS2 reversible keypad reader (left/right mount)
• Single SKU for both door frame orientations
• PIN credential entry for Napco systems

Napco · IBR-ZREMOTE

Napco IBR-ZREMOTE Remote Zone Expander Module

Network-based zone expansion for multi-building security without panel replacement

• IBR-ZREMOTE remote zone expander for StarLink Connect
• Centralized event/status flow to existing communicator
• Direct-fit Gemini intrusion panel integration

Napco · SLE-LTEV

Napco SLE-LTEV Smart Card Reader

Smart card reader with LTE cellular alarm reporting for wireless access control

• SLE-LTEV smart card reader with cellular alarm reporting
• Encrypted LTE comms for access event transmission
• ISO/IEC 14443 smart card credential support

Napco · SLE-MAXV

Napco SLE-MAXV Smart Card Reader

Smart card reader with built-in cellular alarm reporting for remote access

• SLE-MAXV smart card reader with cellular reporting
• ISO/IEC 14443 + proprietary smart card formats
• Built-in cellular modem for tamper/event logs

Optex · FLX-A-AM

Optex FLX-A-AM FLEX Series Motion Detector

Indoor PIR motion detector with flip lens for wide or narrow coverage

• Flip-lens indoor PIR toggles wide and narrow detection patterns
• 12 mA draw - low alarm panel aux power budget impact
• One SKU covers hallways, rooms, and high-traffic zone needs

Optex · FLX-A-DAM

Optex FLX-A-DAM FLEX Series Motion Detector

Gateway cluster module for multi-site Optex FLX deployments

• FLEX series add-on cluster module for multi-node gateway scaling
• Distributed processing and traffic load balancing across the cluster
• Wall or ceiling mount for large-site security deployments

Optex · FLX-P-DT

Optex FLX-P-DT FLEX Series Motion Detector

PIR motion detector with 80 ft narrow range and flip lens coverage

• Flip-lens PIR with dual-tech sensing toggles wide or 80 ft narrow
• 12 mA draw at 12V DC - low alarm panel power impact
• One unit covers long hallways or open zones without dual sensors

Optex · FLX-P-ST

Optex FLX-P-ST FLEX Series Motion Detector

Indoor PIR motion detector with selectable detection area and IR lowlight

• Flip-lens PIR motion detector toggles wide and narrow patterns
• 12 mA draw at 12V DC alarm bus - low aux power budget impact
• Single SKU adapts to hallway, lobby, and open-room geometries

Optex · FLX-S-DT

Optex FLX-S-DT FLEX Series Motion Detector

Wall/ceiling PIR motion sensor with selectable detection patterns

• Flip-lens PIR with dual-tech sensing for false-alarm filtering
• 12 mA draw extends battery backup runtime on alarm panel supply
• One unit handles narrow and wide coverage patterns on site

Optex · FLX-S-ST

Optex FLX-S-ST FLEX Series Motion Detector

Outdoor/indoor motion sensor for residential and light commercial security

• FLEX series motion detector with infrared low-light operation
• Indoor and outdoor capable with weather-rated housing
• Drops onto standard alarm panel zone wiring for motion zones

Optex · FTN-RAMI

Optex FTN-RAMI Compact Outdoor Motion Detector

Battery-powered outdoor PIR with dual sensors and anti-masking for wireless perimeter security

• Compact outdoor motion detector with two correlated PIR sensors
• Dual-PIR correlation rejects small-animal and thermal-drift alarms
• 3 x 10 mm compact form factor for discreet outdoor placement

Optex · HX-80NRAMI

Optex HX-80NRAMI Network Radar Motion Detector

Network radar motion detector for outdoor perimeter monitoring through weather

• Network radar motion detector works through rain, fog, and temp swings
• Direct IP integration over standard Ethernet to VMS and access systems
• ONVIF-aligned output drops into modern video and security platforms

Optex · RLS-50100V

Optex RLS-50100V Outdoor Infrared Motion Detector

Dual-element outdoor IR detector, 30–50 ft range, pet-immune tuning

• Dual-element outdoor PIR cuts wind and rain false-alarm rates
• Mounts at 2-4m height on wall or pole for fence-line coverage
• Outdoor-rated housing for direct rain and sun exposure year-round