Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

69 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

655 items

Door Controllers

139 items

Door Hardware & I/O

1575 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Add to Cart The item has been added
HES

SKU: 7000C-630

HES 7000C-630 Complete PACS Latchbolt Electric Strike

Complete electric strike for latchbolt doors with integrated access control
- Electromagnetic strike replaces keys with credential-verified remote access control
- Purpose-built for standard latchbolt locks; no adapters or custom fabrication needed
- 12VDC operation with fail-safe design; integrates with existing control systems
In stock · Ships same business day

$445.00 $224.99 Save $220.01

Add to Cart
The item has been added
Free shipping over $499

$445.00 $224.99 Save $220.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: 7100-310-335-00

HES 7100-310-335-00 Electric Strike Black

Black electric strike for standard and networked access control
- Compatible with both standard and networked access control systems
- 12VDC input voltage for direct integration into commercial door frames
- Indoor commercial rated with standard strike mounting configuration
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7100-310-628-00

HES 7100-310-628-00 Electric Strike for Aluminum Jamb

Electric strike for aluminum door frames, 12/24VDC access control
- Purpose-engineered for aluminum jambs—mounts directly, no field machining
- Standard 12/24VDC wiring integrates with card readers, keypads, intercoms
- ~500mA release draw fits within shared power budgets across multiple doors
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7100-315-626-00

HES 7100-315-626-00 Electric Strike Aluminum Jamb

Electromagnetic strike for aluminum jamb doors with fail-safe/secure modes
- Mounts directly to aluminum jambs with keeper plate alignment setup
- Switchable fail-safe and fail-secure operation modes for access control systems
- 12VDC electromagnetic mechanism compatible with keypad and control integration
$294.00 $146.99 Save $147.01

Add to Cart
The item has been added
Free shipping over $499

$294.00 $146.99 Save $147.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7100-317-313-00

HES 7100-317-313-00 Electric Strike for Aluminum Jambs

12VDC monitored fail-safe strike for aluminum door frames
- Monitored fail-safe design locks door on power loss or system fault
- Flat faceplate mounts flush to aluminum jambs up to 1-1/16 inch deep
- 12VDC operation integrates with standard access control power supplies
$398.00 $198.99 Save $199.01

Add to Cart
The item has been added
Free shipping over $499

$398.00 $198.99 Save $199.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7100-510-313-00

HES 7100-510-313-00 Electric Strike

12VDC electric strike for standard door frame access control
- Electronic latch release integrates with standard access control systems
- Indoor commercial/institutional installation in controlled access points
- Lightweight design at 1.9 lb fits standard door frame applications
$249.61 $124.99 Save $124.62

Add to Cart
The item has been added
Free shipping over $499

$249.61 $124.99 Save $124.62

Add to quote Compare
Compare

Out of stock
HES

SKU: 7100-510-335-00

HES 7100-510-335-00 Fail-Secure Electric Strike

Fail-secure 24VDC electric strike for access control doors
- Remains locked during power loss for maximum security
- 4-7/8" flat faceplate fits hollow metal and wood frames
- Black anodized finish resists corrosion in commercial settings
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7101-310-313-00

HES 7101-310-313-00 Electric Strike

Remote-controlled electric strike for commercial door access systems
- Fail-safe and fail-secure modes for flexible security protocols
- Works with standard access control panels and door automation systems
- Indoor-rated mechanism integrates into standard door frames
$249.61 $124.99 Save $124.62

Add to Cart
The item has been added
Free shipping over $499

$249.61 $124.99 Save $124.62

Add to quote Compare
Compare

Out of stock
HES

SKU: 7103A-510

HES 7103A-510 Electric Strike Body Kit

Professional electric strike body kit for fail-safe and fail-secure control
- Dual operating modes (fail-safe/fail-secure) for flexible access control
- Surface and recessed mounting options for standard commercial door frames
- 12VDC operation compatible with HES systems and standard access platforms
$214.00 $213.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$214.00 $213.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7130-310-628-00

HES 7130-310-628-00 12VDC Electronic Strike

12VDC electronic strike for access control on standard door frames
- Electromechanical latch release integrates directly into 12VDC access control circuits
- Fits standard 4-7/8" × 1-1/4" strike box; works with mortise and cylindrical latches
- Fail-secure design keeps door locked when power is off for security
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7130-510-628-00

HES 7130-510-628-00 Electric Strike Radius 24V DC

24V DC electromagnetic strike for standard radius door frames
- 24V DC power operation integrates with access control systems
- Radius geometry design fits standard door frame installations
- Electromagnetic actuation for indoor access control applications
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7130-515-628-00

HES 7130-515-628-00 Electric Strike

Professional electric strike for access control integration
- 12VDC powered strike with controlled locking/unlocking for doors
- Compatible with standard access control platforms and frame types
- US-made construction rated for commercial and institutional use
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7140-310-313-00

HES 7140-310-313-00 Electric Strike 12VDC

12VDC fail-secure electric strike for standard door frame installations
- Fail-secure operation keeps door locked during power loss events
- F/SEC protocol compatible with professional access control systems
- Commercial-grade construction rated for high-security facility deployment
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7140-310-313-01

HES 7140-310-313-01 Electric Strike 12VDC

12VDC electric strike for mortise locks with fail-safe/fail-secure modes
- 1-1/2 inch lip fits standard mortise lock frames in commercial installations
- Dual-mode operation—switch between fail-safe and fail-secure configurations
- Dark bronze exterior-rated construction withstands outdoor entry environments
$306.00 $152.99 Save $153.01

Add to Cart
The item has been added
Free shipping over $499

$306.00 $152.99 Save $153.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7140-310-628-00

HES 7140-310-628-00 12VDC Direct-Release Strike

12VDC direct-release strike for fail-safe or fail-secure access control
- 12VDC operation integrates with standard access control infrastructure
- Configurable fail-safe or fail-secure modes for emergency egress or security lockdown
- Direct electromagnetic release responds immediately to access control commands
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 7140-315-628-00

HES 7140-315-628-00 Electric Strike

Electromagnetic strike for access control systems, standard frame compatible
- Continuous-duty operation rated for high-traffic commercial installations
- Integrates directly with access control platforms for managed entry
- Standard door frame compatible design minimizes retrofit complexity
$258.00 $128.99 Save $129.01

Add to Cart
The item has been added
Free shipping over $499

$258.00 $128.99 Save $129.01

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.