Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

69 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

655 items

Door Controllers

139 items

Door Hardware & I/O

1531 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Out of stock
HES

SKU: 1LB-630

HES 1LB-630 Satin Stainless Steel Faceplate Kit

Satin stainless steel faceplate for HES electric strike systems
- Satin stainless steel construction resists corrosion in high-traffic indoor environments.
- Engineered for direct integration with HES electric strike hardware and access control systems.
- Lightweight at 0.2 lb; fits standard door frame mounting for fast, clean installation.
$63.00 $62.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$63.00 $62.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-BSP

HES 1LB-BSP Black Suede Faceplate Kit

Black suede faceplate kit for HES access control systems
- Replacement faceplate with black suede finish for discrete appearance
- Compatible with HES locking and access control system hardware
- Designed for commercial and institutional security installations
$104.00 $103.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$104.00 $103.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 2004M

HES 2004M ElectroLynx Adapter for Electric Strikes

Retrofit adapter bridges legacy HES strikes to ElectroLynx control systems
- Bridges legacy HES electric strikes to ElectroLynx platforms without strike replacement.
- Preserves existing strike hardware investment during access control system modernization.
- Lightweight at 0.4 lb; US-made adapter suited for mixed-generation retrofit deployments.
$52.00 $51.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$52.00 $51.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: 2005M3

HES 2005M3 Electric Strike Power Controller

In-line power controller for HES strikes, 12–32V AC/DC input
- Regulates voltage across wide 12–32V AC/DC range for stable strike operation
- Resettable fuse and MOV surge suppression protect against overcurrent and spikes
- Input Status LED shows real-time power state; compact in-line form for retrofit fit
$138.00 $69.99 Save $68.01

Add to Cart
The item has been added
Free shipping over $499

$138.00 $69.99 Save $68.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: 2006M

HES 2006M Plug-in Buzzer

Plug-in buzzer for HES electric strike systems with 24VDC operation
- Direct integration with HES strike systems for audible access confirmation
- 24VDC powered design works with standard HES electric strike product lines
- Compact form factor supports indoor commercial and institutional deployments
$70.00 $69.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$70.00 $69.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 2007M

HES 2007M Plug-in Pigtail Connector 4-Wire

4-wire plug-in pigtail connector for HES electric strike systems
- Plug-in design enables fast field termination and quick-disconnect servicing.
- 4-wire lead configuration supports standard electric strike access control wiring.
- Compatible with HES 9800 and Adams Rite 7800 series electric strike systems.
$27.50 $26.99 Save $0.51

Add to Cart
The item has been added
Free shipping over $499

$27.50 $26.99 Save $0.51

Add to quote Compare
Compare

Out of stock
HES

SKU: 31-0736-IP

HES 31-0736-IP 24V Coil Solenoid

24V DC coil solenoid for access control and automated gates
- 24V DC coil design works with HES and third-party control systems
- Rated for electronic door locks, gates, and barrier control applications
- Individually packed for secure transport and installation
$330.00 $164.99 Save $165.01

Add to Cart
The item has been added
Free shipping over $499

$330.00 $164.99 Save $165.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 320S

HES 320S 300 Pound Single Magnetic Lock

300-pound fail-secure magnetic lock for standard access control
- 300 lb holding force secures hollow metal, wood, and aluminum doors
- Dual voltage (12/24 VDC) works with existing access control systems
- Fail-secure design keeps door locked during power loss or interruption
$195.00 $107.99 Save $87.01

Add to Cart
The item has been added
Free shipping over $499

$195.00 $107.99 Save $87.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-20-101-628

HES 4300-20-101-628 Steel Hawk Electrified Deadlatch

31/32 electrified deadlatch with fail-secure steel construction for access control
- Steel hawk mechanism operates on 12/24 VDC for dual-voltage flexibility
- Integrates with access control systems, electric strikes, and mag locks
- Mounts to hollow metal and wood door frames with fail-secure operation
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-20-201-313

HES 4300-20-201-313 Aluminum Door Latch

Aluminum latch for HES electrified systems, 31/32 strike, dark bronze
- Dark bronze aluminum construction resists corrosion in commercial buildings
- 31/32 strike configuration fits standard door frame preparations without mods
- Non-monitored assembly integrates with HES electrified locking deployments
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-20-201-628

HES 4300-20-201-628 Aluminum Latch Door Assembly

Aluminum latch assembly, 31/32 profile, no-monitor for HES systems
- Clear anodized aluminum construction resists corrosion in indoor environments
- 31/32 standard profile fits common door frame installations without modification
- No-monitor configuration eliminates additional wiring and control overhead
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-3-0-201-313

HES 4300-3-0-201-313 Electrified Deadlatch

Remote-controlled electrified deadlatch for commercial access systems
- 1-1/8 inch backset fits standard commercial door frames without modification
- 24VDC electrified mechanism integrates with institutional access control systems
- Keypad-compatible reader supports real-time remote locking and unlocking
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-30-101-313

HES 4300-30-101-313 Aluminum Door Latch

Surface-mount aluminum latch, 1-1/8" mechanical, dark bronze anodize
- 1-1/8" mechanical latch operates without electrical monitoring for simple integration
- Dark bronze anodized aluminum resists corrosion in commercial indoor environments
- Surface mount retrofit design works with standard access control wiring schemes
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-30-101-628

HES 4300-30-101-628 Aluminum Door Latch

Aluminum electromechanical latch for 1-1/8" doors with HES control
- 24VDC electromechanical integration with HES access control systems
- Aluminum construction resists corrosion in indoor security applications
- Fits standard 1-1/8 inch door thickness for frame and strike mounting
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-30-201-628

HES 4300-30-201-628 Aluminum Door Latch

1-1/8" aluminum latch for HES access control & electric strike systems
- Clear anodized aluminum resists corrosion with minimal maintenance
- Mechanical operation integrates directly into HES system architectures
- Standard form factor fits typical commercial door frames without modification
$584.00 $291.99 Save $292.01

Add to Cart
The item has been added
Free shipping over $499

$584.00 $291.99 Save $292.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 4300-3M-101-628

HES 4300-3M-101-628 Access Control Hardware

24VDC access control strike for commercial door security
- Industrial-strength construction rated for high-traffic commercial entries
- Integrates with standard security systems and existing control infrastructure
- Minimal maintenance design for long-term reliable operation
$654.64 $321.99 Save $332.65

Add to Cart
The item has been added
Free shipping over $499

$654.64 $321.99 Save $332.65

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.