Access Control
Sub categories
Cellular Communicators
12 items
Intrusion Panels
33 items
Keypads & Touchscreens
34 items
Motion & Glass Break Detectors
67 items
Sirens & Sounders
12 items
Wireless Sensors
52 items
Access Cards & Credentials
22 items
Access Hubs & Controllers
21 items
Card Readers
54 items
Control Systems
258 items
Credentials
655 items
Door Controllers
139 items
Door Hardware & I/O
1530 items
Door Locks & Strikes
325 items
Showing Results for Access Control
-
Add to Cart The item has been addedDMP
SKU: 738A
DMP 738A Interface Expansion Module
TCP/IP expansion module for DMP control panels with 12VDC operation
- TCP/IP communication eliminates proprietary serial links for clean network integration.
- Draws 12VDC from existing panel supply rail—no separate regulated power source needed.
- Slot-based form factor (5.5"×3"×0.75") minimizes panel footprint versus stand-alone boxes.
$90.00 $46.99 Save $43.01The item has been added -
DMP
SKU: 7463-W
DMP 7463-W Network Thinline LCD Keypad with Prox Reader
Network LCD keypad with dual PIN and proximity card access
- Network communication eliminates dedicated wiring runs, simplifying multi-keypad deployments.
- Integrated proximity reader supports dual-credential (PIN + prox card) access from one device.
- Built-in 4-hour backup battery maintains operation during AC loss without an external enclosure.
$452.00 $228.99 Save $223.01The item has been added -
DMP
SKU: 763
DMP 763 Wi-Fi Interface Module
Wi-Fi interface for DMP keypad systems—wireless retrofit or new build
- Adds 2.4GHz Wi-Fi to DMP XT/XR panels—no network cable run required.
- Auto-fails over to cellular if Wi-Fi drops, maintaining signal path continuity.
- Draws 12VDC directly from panel supply; no external power adapter needed.
$141.00 $84.99 Save $56.01The item has been added -
DMP
SKU: 861
DMP 861 Power Distribution/4 Wire Bus Module
Centralized power & 4-wire bus module for multi-keypad access systems
- 4-wire bus connectivity synchronizes multiple keypads and readers from one module.
- Centralized 12V/24V DC power distribution eliminates distributed point-of-load supplies.
- Compact form factor mounts in existing DMP cabinets with no separate power supply needed.
$65.00 $33.99 Save $31.01The item has been added -
DMP
SKU: 865
DMP 865 Style W/X Notification Module
TCP/IP notification module for DMP control panel auxiliary expansion
- TCP/IP integration eliminates dedicated serial runs in DMP control panel networks.
- Monitors opens, shorts, and ground faults on notification circuits in real time.
- Operates at 9.6–14.2 VDC, compatible with panel-mounted or remote 24VDC supplies.
$10.99The item has been added -
Add to Cart The item has been addedDMP
SKU: 866
DMP 866 Notification Module
12VDC auxiliary notification module for DMP access control expansion
- Runs on 12VDC, integrating directly into existing access control cabinet power supplies.
- Auxiliary architecture adds notification endpoints without disrupting active panel configs.
- Scales multi-door and multi-reader deployments without replacing core control infrastructure.
$112.00 $55.99 Save $56.01The item has been added -
DMP
SKU: 867
DMP 867 LX-Bus Addressable Notification Module
LX-Bus addressable notification module for networked multi-site control
- Style W supervised circuit supports 12VDC or 24VDC notification loads on one module.
- Built-in ground fault, open, and short detection with four status LEDs prevents silent failures.
- LX-Bus TCP/IP backbone enables centralized notification control across distributed multi-site deployments.
$193.00 $98.99 Save $94.01The item has been added -
DMP
SKU: 869
DMP 869 Style D Initiating Module
25VDC initiating module expands DMP security system zones
- Two independent supervised 4-wire initiating circuits expand DMP panel zone capacity.
- 8–25 VDC operating range integrates directly with standard DMP power distribution.
- Continuous ground-fault supervision detects wiring opens, shorts, and faults pre-alarm.
$122.00 $61.99 Save $60.01The item has been added -
DMP
SKU: 893A
DMP 893A Dual Phone Line Module Keypad
Dual phone line keypad module for DMP access control expansion
- Monitors main and backup phone lines for voltage drops, alerting local keypads and central station.
- UL 864 listed and FCC Part 15/68 compliant, meeting fire signaling and telecom regulatory requirements.
- Installs into DMP panel enclosure at 12VDC via wire harness, fitting existing auxiliary expansion slots.
$169.00 $150.99 Save $18.01The item has been added -
DMP
SKU: AP2-20N
DMP AP2-20N Curtain PIR Motion Detector
Curtain PIR motion detector for doorways, windows, and perimeter zones
- Vertical curtain pattern limits coverage to doorways and windows, cutting lateral false alarms.
- Hardwired zone-loop connection eliminates battery maintenance and wireless mesh overhead.
- Native DMP panel integration supports unified hardwired architecture with contacts and keypads.
$82.00 $63.99 Save $18.01The item has been added -
DMP
SKU: CM-30E
DMP CM-30E Push to Exit Button
24VDC networked push-to-exit button for DMP access control
- Accepts 12 or 24 VDC supply, matching either DMP XT or XR Series panel output.
- SPDT contacts support NO or NC wiring to meet your panel's fail-safe configuration.
- Single-gang stainless faceplate fits standard electrical boxes; consumes one zone input.
$117.00 $59.99 Save $57.01The item has been added -
DMP
SKU: CM-310GPTE
DMP CM-310GPTE Slimline Push to Exit Button
Slimline push-to-exit button with TCP/IP networking for access control
- Runs on 24VDC, matching standard door-zone power supplies with no added distribution hardware.
- Native TCP/IP communication eliminates gateway hardware, reducing labor on networked deployments.
- HID credential compatibility lets integrators standardize reader ecosystems across the facility.
$85.00 $51.99 Save $33.01The item has been added -
DMP
SKU: CMC-2
DMP CMC-2 Conekt Bluetooth Mobile Credential
Bluetooth mobile credential reader for DMP wireless access control
- BLE-based authentication eliminates physical card issuance and reduces lost-credential overhead.
- MIFARE DESFire EV1 encryption prevents credential cloning for compliance-sensitive deployments.
- Integrates natively with DMP Conekt panels; no third-party API gateway or VMS required.
$7.99The item has been added -
DMP
SKU: CSK-2
DMP CSK-2 MIFARE DESFire EV2 Keyfob Credential
13.56 MHz contactless keyfob with MIFARE DESFire EV2 encryption
- DESFire EV2 encryption enables dynamic credential reissuance without hardware replacement.
- ISO 14443-A at 13.56 MHz ensures compatibility with all DESFire EV2-certified readers.
- Keyfob form factor attaches to key rings, reducing credential loss risk in daily use.
$6.99The item has been added -
DMP
SKU: CSM-2P
DMP CSM-2P MIFARE DESFire EV2 Smart Card
MIFARE DESFire EV2 contactless smart card with 128-bit AES encryption
- 128-bit AES encryption blocks credential cloning and eavesdropping attacks.
- 13.56 MHz ISO 14443-A protocol integrates with HID, Salto, and Axis readers.
- Standard CR80 card dimensions (2.1"×3.4"×0.03") fit existing badge holders.
$5.99The item has been added -
Add to Cart The item has been addedDMP
SKU: CX-702
DMP CX-702 PIR Motion Detector 70' x 70' Coverage
70' x 70' PIR motion detector for wired intrusion systems
- 70' x 70' coverage monitors ~4,900 sq ft per sensor, reducing device count on large sites.
- 12VDC operation integrates into existing panel aux power loops — no separate supply needed.
- Passive infrared sensing eliminates active illumination and resists false alarms from light shifts.
$111.00 $91.99 Save $19.01The item has been added
Access Control
Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.
Plan Your Deployment
- Door count and expansion requirements
- Reader type (card, keypad, biometric) and credential format
- Fail-safe vs fail-secure hardware design
- Power, cabling, and network connectivity planning
- Multi-site governance and consistent standards
Build a Complete System
Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.
