Access Control
Sub categories
Cellular Communicators
12 items
Intrusion Panels
33 items
Keypads & Touchscreens
34 items
Motion & Glass Break Detectors
69 items
Sirens & Sounders
12 items
Wireless Sensors
52 items
Access Cards & Credentials
22 items
Access Hubs & Controllers
21 items
Card Readers
54 items
Control Systems
258 items
Credentials
655 items
Door Controllers
139 items
Door Hardware & I/O
1531 items
Door Locks & Strikes
325 items
Showing Results for Access Control
-
DMP
SKU: 352M-G
DMP 352M-G Extra Large Enclosure with Mounting Plate
Extra large 14.5" × 32" metal enclosure with included mounting plate
- 14.5" × 32" × 4" interior gives ample room for multi-board panel builds.
- Included mounting plate speeds rack or wall installation without added hardware.
- Lid adds 0.5" clearance per side, accommodating thicker cabling and connectors.
$707.00 $447.99 Save $259.01The item has been added -
DMP
SKU: 352P-G
DMP 352P-G Extra Large Panel Enclosure
Extra large panel enclosure with 324 VA transformer for access control and building automation
- 14.5"×32"×4" interior accommodates multi-device layouts, relay banks, and wiring runs.
- Integrated 324 VA 100VAC wire-in transformer eliminates separate sourcing and reduces install time.
- 505-12 power supply comes pre-installed, reducing bench assembly steps before field deployment.
$1,132.00 $566.99 Save $565.01The item has been added -
DMP
SKU: 352PM-G
DMP 352PM-G Power Distribution Enclosure with Transformers
Extra-large steel enclosure with integrated transformers for security and telecom
- 14.5"×32"×4" steel enclosure provides ample room for components and cable routing.
- Ships with 505-12 power supply and 100 VAC wire-in transformer pre-installed.
- TCP/IP support allows direct network communication with enclosure-mounted controllers.
$932.00 $590.99 Save $341.01The item has been added -
DMP
SKU: 354-G
DMP 354-G Retrofit Plate
Panel-level retrofit plate for control system upgrades
- Installs 714 or 715 zone expanders into 350-series enclosures without panel removal.
- No conduit disconnection required, minimizing downtime on active, wall-mounted systems.
- Mounts directly to existing DMP 350-series enclosure structure for a clean retrofit fit.
$80.00 $70.99 Save $9.01The item has been added -
DMP
SKU: 354A-G
DMP 354A-G Mounting Plate
Wall-mount control panel plate for DMP TCP/IP systems
- Mounts two 714 or 715 zone expander PCBs without removing the enclosure from the wall.
- Engineered for DMP 350 series enclosures, ensuring precise PCB alignment with backplane connectors.
- Requires only standard fasteners, enabling low-downtime retrofits to existing control panel installations.
$96.99The item has been added -
DMP
SKU: 694-7800-W
DMP 694-7800-W Keypad Backplate
Replacement backplate for DMP PIN-entry keypad readers
- Covers legacy Bosch/Radionics and DMP 600/700 Series wall cavities without patching.
- 8.25" × 6.5" footprint accommodates existing screw holes, eliminating conduit rework.
- Passive mechanical component — installs atop existing wiring runs for 7800 Series keypads.
$41.00 $36.99 Save $4.01The item has been added -
DMP
SKU: 694-W
DMP 694-W Keypad Backplate
Door-frame backplate for NFC/13.56MHz keypad readers
- White metal backplate covers existing door cutouts without full door modification.
- 8.25" W × 6.5" H footprint fits standard door-frame LCD keypad retrofit installations.
- White powder-coat finish suits indoor commercial access control deployments.
$41.00 $36.99 Save $4.01The item has been added -
DMP
SKU: 699
DMP 699 Keypad Deskstand
Desktop deskstand for DMP keypad readers in access control
- Smoked plexiglass stand holds DMP LCD keypads at a stable angle on any flat surface.
- Included 4-foot RJ11 cord connects directly to keypad jack — no separate wiring required.
- Rubber pads and mounting screws prevent shifting during credential entry at busy stations.
$82.00 $72.99 Save $9.01The item has been added -
DMP
SKU: 699-7800
DMP 699-7800 Keypad Deskstand Reader
PIN-based deskstand keypad reader for DMP access control systems
- Mounts DMP 7800 Series LCD keypads on any desk or counter without wall installation.
- Includes 4-foot RJ11 cord for direct connection to the DMP control panel comm jack.
- Rubber pads protect desk surfaces and reduce vibration during PIN-entry operation.
$91.00 $78.99 Save $12.01The item has been added -
Add to Cart The item has been addedDMP
SKU: 699-W
DMP 699-W Metal Keypad Deskstand
Metal deskstand for NFC and 13.56MHz keypad readers in offices
- Rigid metal frame maintains reader alignment across high-volume NFC/13.56MHz auth cycles.
- Includes mounting screws, rubber pads, and 4-ft RJ11 cord for immediate counter deployment.
- Compact 12.5"W × 9.5"H × 3.75"D footprint suits space-constrained lobbies and checkpoints.
$76.00 $74.99 Save $1.01The item has been added -
DMP
SKU: 708
DMP 708 Bus Extender Modules
15VDC bus extender for DMP multi-zone system expansion
- Regenerates LX-Bus signal timing and amplitude to prevent data corruption on long runs.
- Operates across 8–15 VDC input range, compatible with standard DMP distributed power supplies.
- Mitigates EMI and crosstalk in noisy environments alongside power and telephone cabling.
$557.00 $282.99 Save $274.01The item has been added -
Add to Cart The item has been addedDMP
SKU: 710
DMP 710 Bus Splitter/Repeater Module
TCP/IP bus splitter/repeater for multi-building access control networks
- Repeats bus signals over extended runs, eliminating dropouts beyond 500 ft.
- TCP/IP communication supports distributed reader architecture across multi-building sites.
- Runs on 15VDC and wall-mounts at 4.5"×2.75"×1.75" for tight IDF or junction installs.
$80.00 $41.99 Save $38.01The item has been added -
Add to Cart The item has been addedDMP
SKU: 711
DMP 711 Zone Expansion Module
Network-based zone expansion module with TCP/IP and keypad reader support
- TCP/IP communication plugs into existing Ethernet infrastructure, eliminating proprietary cabling.
- Keypad reader support enables PIN-based credential entry at each expansion zone.
- Runs at 15VDC, integrating cleanly into standard security power distribution backbones.
$46.00 $22.99 Save $23.01The item has been added -
DMP
SKU: 711S
DMP 711S Zone Expansion Module
TCP/IP zone expansion module for compatible DMP security systems
- Adds a single addressable zone via flying-lead to DMP XT/XR panels without hardware replacement.
- TCP/IP communication enables distributed zone supervision across multi-site deployments.
- Ships with 1k ohm resistor; UL 365/864/1076 and CSFM/FDNY listed for fire-rated installs.
$34.00 $17.99 Save $16.01The item has been added -
DMP
SKU: 712-8
DMP 712-8 Zone Expansion Module
8-zone expansion module for DMP panel systems at 15VDC
- Adds 8 supervised burglary zones to a DMP panel without replacing or redesigning the system.
- Plug-in module slot with dip switch addressing keeps installation compact and wiring minimal.
- Pre-installed EOL resistors enable immediate zone supervision straight out of the box.
$88.00 $44.99 Save $43.01The item has been added -
Add to Cart The item has been addedDMP
SKU: 716
DMP 716 Output Expansion Module
15VDC relay expansion for multi-door access control without main panel swap
- DMP output expansion module adds switched outputs to control panels
- 15VDC native DMP platform power - no aux supply required
- Modular expansion drops into existing DMP electrical closet wiring
$151.00 $76.99 Save $74.01The item has been added
Access Control
Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.
Plan Your Deployment
- Door count and expansion requirements
- Reader type (card, keypad, biometric) and credential format
- Fail-safe vs fail-secure hardware design
- Power, cabling, and network connectivity planning
- Multi-site governance and consistent standards
Build a Complete System
Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.
