Access Control Systems | Commercial Door Access & Credentials

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Sub categories

Showing Results for Access Control

Compare

Out of stock
SDC

SKU: 923PW

Sdc/Security Door Controls 923PW Narrow Digital Keypad Reader

Dual-credential narrow keypad reader with 500-user capacity for retrofit door frames
- Proximity card + PIN keypad input via 125kHz HID/Honeywell compatible credentials
- Wiegand output integrates with existing access control panels and legacy systems
- Compact form factor fits standard door frame cutouts; 16VDC wired operation
Special Order · Ships in 2-3 weeks

$383.99 $346.99 Save $37.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 926

SDC/Security Door Controls 926 Outdoor Digital Entry Lock

Outdoor digital lock for multi-door access control up to 63 doors
- Supports 500 credentials across DESFire, MIFARE, NFC 13.56 MHz, 125 kHz proximity
- OSDP and TCP/IP integration with standard access control systems
- 28 VDC powered outdoor-rated lock/strike for commercial deployments
Special Order · Ships in 2-3 weeks

$221.99 $199.99 Save $22.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: ACM-1

Sdc/Security Door Controls ACM-1 Access Control Module

Single-relay access module for HID readers and electric strikes at 24VDC
- SPDT relay control integrates with HID-compatible card and badge readers
- 24VDC operation matches standard electromagnetic lock and strike voltage
- Designed for commercial and institutional door access control systems
Special Order · Ships in 2-3 weeks

$70.99 $64.99 Save $6.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: APB1000A

Sdc/Security Door Controls APB1000A Emergency Access Panel

OSDP emergency access panel with NFC + keypad dual-input control
- Dual-input architecture accepts both NFC/13.56MHz proximity and keypad credentials
- OSDP protocol integration for secure networked multi-door access control systems
- 24VDC wired operation designed for standard commercial installation environments
Special Order · Ships in 2-3 weeks

$272.99 $245.99 Save $27.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: AUTO-IR36Y

SDC/Security Door Controls AUTO-IR36Y Presence Sensor

36-door presence sensor controller with TCP/IP networking
- Supports 36 doors with HID credential integration for enterprise access
- TCP/IP wired connectivity for centralized networked deployments
- 37VDC operation with door-level presence sensor coordination
In stock · Ships same business day

$545.00 $311.99 Save $233.01

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: AUTO-IR48Y

Sdc/Security Door Controls AUTO-IR48Y Presence Sensor

48-point presence sensor controller with TCP/IP networking for mid-to-large access control
- 48-point detection capacity on single 37VDC controller for multi-reader deployments
- TCP/IP networked communication integrates with centralized security management systems
- HID credential compatibility works with standard card readers and proximity devices
Special Order · Ships in 2-3 weeks

$586.99 $528.99 Save $58.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: AUTOS236V

Sdc/Security Door Controls AUTOS236V Single Pull Strike

36" single pull strike, 24VDC, supports 250K users across 63 doors
- OSDP and TCP/IP protocols integrate with enterprise access control systems
- Supports 125kHz prox, 13.56MHz NFC, MIFARE, and DESFire credentials
- Rated for 36" door width, wired 24VDC operation, professional installation
Special Order · Ships in 2-3 weeks

$1,836.99 $1,656.99 Save $180.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: AUTOS336V

SDC/Security Door Controls AUTOS336V Single Push/Pull 36" Strike

36" electric strike for networked access control with multi-credential support
- Supports OSDP and TCP/IP protocols for real-time door control across 63 doors
- Accepts DESFire, MIFARE, NFC/13.56MHz, and 125kHz Prox credentials in one system
- Manages up to 250,000 user credentials on 24VDC wired network architecture
Special Order · Ships in 2-3 weeks

$2,043.99 $1,843.99 Save $200.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: BPS6PV

Sdc/Security Door Controls BPS6PV Surface Mount Controller

Surface-mount controller for 63 doors and 250,000 credentials
- Manages up to 63 doors with support for 250,000 user credentials
- DESFire, MIFARE, NFC 13.56MHz, and 125kHz Prox credential support
- OSDP and TCP/IP communication for software integration
Special Order · Ships in 2-3 weeks

$303.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: BPS6SV

Sdc/Security Door Controls BPS6SV Surface Mount Controller

OSDP surface-mount controller for NFC and proximity card access
- Dual-technology reader supports NFC and 13.56MHz proximity cards
- OSDP protocol integration with standard access control systems
- Surface-mount 42" square post installation with keypad compatibility
Special Order · Ships in 2-3 weeks

$303.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: BR64XL

SDC/Security Door Controls BR64XL AC Rectifier Controller

AC rectifier controller with OSDP for proximity and keypad readers
- OSDP communication integrates with modern access control platforms
- Supports proximity readers and keypad credential types simultaneously
- Wired connectivity for commercial and enterprise door access systems
In stock · Ships same business day

$21.99 $20.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: CA-UR4-8

SDC/Security Door Controls CA-UR4-8 Interface Cable

Dedicated interface cable for SDC UR4-8 multi-door access control
- Works with UR4-8 controller and HID credential reader systems
- UR4-8 interface connector type for direct hardware integration
- Supports multi-door access control installations and configurations
Special Order · Ships in 2-3 weeks

$37.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: CB701

SDC/Security Door Controls CB701 OSDP Controller

OSDP wired controller for NFC/keypad door access integration
- OSDP-compliant communication for standardized access control panel integration
- Supports NFC 13.56MHz proximity readers and keypads in mixed-credential setups
- 24VDC wired field controller for networked door lock management
Special Order · Ships in 2-3 weeks

$120.99 $108.99 Save $12.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: CC3-5-7652

SDC/Security Door Controls CC3-5-7652 Cable 5ft Socket

5ft HID cable socket for SDC access control door readers
- 5-foot length spans standard door frame to controller mounting distances
- Socket connector integrates with HID credential-based SDC systems
- Cable assembly supports multi-door commercial access control installations
In stock · Ships same business day

$256.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: DTMA-1

SDC/Security Door Controls DTMA-1 One Alternate Action Lock

One alternate action strike for HID access control at 30VDC
- Toggle between locked/unlocked states via HID credential readers
- 30VDC operation integrates with standard access control platforms
- Single-door strike designed for straightforward access installations
Special Order · Ships in 2-3 weeks

$214.99 $197.99 Save $17.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: DTMO-1

SDC/Security Door Controls DTMO-1 Momentary Switch

30VDC momentary switch for HID-integrated door strike and lock control
- Momentary switch logic controls door strike or magnetic lock activation
- Compatible with HID reader systems and SDC access control platforms
- Supports secondary access triggers, emergency unlock, and supervisory override
Special Order · Ships in 2-3 weeks

$195.99 $186.99 Save $9.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.

Access Control

Plan Your Deployment

Sub categories

Showing Results for Access Control

Sdc/Security Door Controls 923PW Narrow Digital Keypad Reader

SDC/Security Door Controls 926 Outdoor Digital Entry Lock

Sdc/Security Door Controls ACM-1 Access Control Module

Sdc/Security Door Controls APB1000A Emergency Access Panel

SDC/Security Door Controls AUTO-IR36Y Presence Sensor

Sdc/Security Door Controls AUTO-IR48Y Presence Sensor

Sdc/Security Door Controls AUTOS236V Single Pull Strike

SDC/Security Door Controls AUTOS336V Single Push/Pull 36" Strike

Sdc/Security Door Controls BPS6PV Surface Mount Controller

Sdc/Security Door Controls BPS6SV Surface Mount Controller

SDC/Security Door Controls BR64XL AC Rectifier Controller

SDC/Security Door Controls CA-UR4-8 Interface Cable

SDC/Security Door Controls CB701 OSDP Controller

SDC/Security Door Controls CC3-5-7652 Cable 5ft Socket

SDC/Security Door Controls DTMA-1 One Alternate Action Lock

SDC/Security Door Controls DTMO-1 Momentary Switch

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading