Lenovo · 7X83S9BY00

Lenovo Custom HX3320 Mria MC00105715 8/6/23 - 7X83S9BY00

2U rack-mount server built around a dual-socket Intel Xeon architecture, targeting compute-dense enterprise workloads where core density, memory

Lenovo · 7Y76A00GWW

Lenovo DE Ctrller DE4000F 32G Hicless 2U24 SFF G2 - 7Y76A00GWW

2U, 24-bay all-flash storage array engineered for organizations that need consistent low latency and high throughput without the overhead of

Lenovo · 7Z73USBA00

Lenovo SR650V2 - 7Z73USBA00

Custom-configured ThinkSystem SR650 V2 rack server built on a 2U chassis with an Intel Xeon processor platform

Lifesafety Power · AC-CABLE-18-BOXED-SET-OF-2

Lifesafety Power AC-Cable-18-Boxed-Set-Of-2 AC Cable Harness

N 18-inch AC power cable harness sold as a matched pair, designed specifically for Lifesafety Power FPO series power supplies

• 18-inch length routes cleanly to FPO series AC input without extension cables or splices.
• Two-pack per box lets you stage a spare on-site, avoiding service delays on second deployments.
• Connector pinout matches FPO series units at 120 VAC, ensuring rated compatibility at installation.

Lifesafety Power · BX50-E5

Lifesafety Power BX50-E5 50W Single Voltag

Compact 50W single-voltage PoE power supply designed to centralize power distribution for small- to mid-scale IP security installations

• 50W PoE budget supports 8–12 typical IP cameras (4–6W each) from a single unit.
• 802.3af/at PoE over Cat5e or better eliminates separate DC cable runs to edge devices.
• Compact form factor fits wall-mount cabinets and cramped electrical closets cleanly.

Lifesafety Power · C8P-BOXED

Lifesafety Power C8P-BOXED C8P-BOXED

Compact boxed power supply and battery backup module designed for multi-camera and access control deployments requiring power continuity during mains

• 8 independent 24VDC outputs consolidate backup power for cameras, readers, and sensors.
• Integrated battery backup keeps critical security devices online during AC mains loss.
• Boxed enclosure fits rack and wall-mount installs, reducing cabinet footprint and cable sprawl.

Lifesafety Power · D8-BOXED

Lifesafety Power D8-BOXED D8-Boxed 8 outputs fused at 3A each

Centralized power distribution unit designed for security and access control installations where multiple devices draw power from a single regulated

• 8 independently fused 3A outputs prevent a single device fault from killing the entire system.
• Centralized boxed form factor consolidates power distribution into one enclosure-mounted unit.
• Supports up to 24A total capacity across mixed security devices from a single regulated source.

Lifesafety Power · D8P-BOXED

Lifesafety Power D8P-BOXED D8P-BOXED

Compact boxed power distribution enclosure designed for security integrators deploying centralized power management across IP camera networks, access

• Pre-assembled boxed enclosure eliminates field assembly and reduces wiring errors.
• Centralizes power feeds for cameras, access control, and auxiliary devices from one unit.
• Compact footprint fits space-constrained telecom cabinets, closets, and equipment racks.

Lifesafety Power · E2-BS1

Lifesafety Power E2-BS1 E2 enclosure with one battery shelf

Single battery shelf module engineered to expand backup power capacity within the E2 enclosure line

• Modular shelf mounts inside E2 enclosures, eliminating external UPS units.
• Connects directly to the E2 internal power bus, backing up all downstream devices.
• Single-shelf form factor suits small-to-mid-scale access control and surveillance sites.

Lifesafety Power · E5M-BOXED

Lifesafety Power E5M-BOXED Unified Power Sol.

Unified power distribution and management solution designed for small to mid-scale security installations requiring consolidated power delivery

• Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
• Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
• Enclosure form factor mounts in equipment racks near primary power entry points.

Lifesafety Power · FPV4-E1

Lifesafety Power FPV4-E1 4A Ps/Enclosure

4-ampere power supply enclosure engineered for centralized power distribution in IP camera and access control deployments

• 4A continuous output supports small-to-mid-scale IP camera or access control loads.
• 24VAC input aligns with standard security infrastructure transformers and panels.
• Single-enclosure distribution reduces wiring overhead and simplifies fault isolation.

Lifesafety Power · RBE-BOXED

Lifesafety Power RBE-BOXED 12VDC 8A

Rackmount battery enclosure designed to consolidate backup power capacity for distributed security and life-safety systems

• Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
• Independent per-slot management allows battery replacement without taking the system offline.
• 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.

Lifesafety Power · RD150-16/E

Lifesafety Power RD150-16/E 150W Rackmount

Supervised rackmount power distribution enclosure designed for small-to-medium security and access control installations where centralized power

• Switchable 12V/24V output powers mixed legacy and modern devices from one supply.
• 16 independently fused outputs isolate zone faults without dropping remaining circuits.
• 2U rackmount form factor integrates into standard 19-inch racks alongside network gear.

Lifesafety Power · RD150/250

Lifesafety Power RD150/250 Rack Mount DC dual voltage

Rack-mounted DC power distribution unit configured for dual-voltage output: 12V at 12A and 24V at 6A

• Dual-rail output delivers 12V @ 12A and 24V @ 6A for mixed-voltage deployments.
• Rack-mount form factor consolidates power distribution and reduces cabinet clutter.
• Both rails operate simultaneously, supporting up to 144W per rail concurrently.

Lifesafety Power · SD4P-BOXED

Lifesafety Power SD4P-BOXED Smart Distribution

Smart power distribution module designed for centralized management of multiple security and access control circuits in integrated installations

• Device-level supervision detects circuit faults instantly, eliminating manual polling.
• Integrates natively with SD4 and SD16 platforms for staged, no-stranded-asset expansion.
• Ships pre-configured for immediate rack or wall mount, reducing on-site deployment time.

NETGEAR · GS724T-600NAS

NETGEAR GS724T-600NAS 24PT GE Smart Switch

24-port Gigabit smart switch designed for converged IP security deployments where surveillance cameras, access control systems, and IT infrastructure

• All 24 Gigabit ports run simultaneously at full line rate on a 52 Gbps non-blocking fabric.
• 256 VLANs and IGMP snooping isolate camera, access control, and IT traffic on one switch.
• Two SFP uplink slots support fiber backbone links without consuming edge Gigabit ports.

NETGEAR · MS308E-100NAS

Netgear MS308E-100NAS 8PT Multigig Plus Switch

N unmanaged MultiGig Plus switch designed for IP security and edge-networked device deployments where plug-and-play operation and multi-gigabit

• Eight PoE++ (802.3bt) ports deliver up to 90W each for high-draw cameras and PTZ heads.
• MultiGig speeds (2.5G/5G/10G) let legacy 1G and modern endpoints share one unmanaged switch.
• Zero-configuration deployment with hardware bandwidth management suits lean-IT edge sites.

Panasonic · CANISTER-NX3/8TB

Panasonic CANISTER-NX3/8TB 8TB NVR Hard Drive Canister

8TB hot-swap canister for WJ-NX310/NX300/HXE400 NVRs with FIPS 140-2 security

• 8TB capacity per canister with hot-swap installation—no downtime during upgrades
• RAID1 software RAID support protects against single-drive failure in surveillance systems
• Stack up to 4 canisters for 72TB total storage across compatible NVR platforms

Panasonic · CANISTER/4000

Panasonic CANISTER/4000 4TB Hard Drive Canister

4TB hot-swappable canister for Panasonic WJ-series NVR systems

• 4TB capacity supports extended 24/7 surveillance recording across multiple streams
• Hot-swappable design allows storage replacement without powering down the system
• Compatible with WJ-ND400, WJ-HD716, WJ-HD616, and WJ-HDE400 recorders

Panasonic · WJ-NVF30W

Panasonic WJ-NVF30W Business Intelligence Kit

Facial recognition & analytics kit for Panasonic NV300 systems

• Facial recognition for access control and identity verification
• People counting and customer behavior analysis from video
• NV300-integrated enhancement kit with 3-year warranty

Pelco · 3DX-600-3DMOUSE

Pelco 3DX-600-3DMOUSE 6-Axis PTZ Joystick

Six-axis PTZ joystick for VideoXpert VMS—pan, tilt, zoom simultaneously

• Simultaneous pan, tilt, and zoom control in one fluid input versus sequential keyboard adjustments
• USB plug-and-play connection to VideoXpert workstations with no separate power supply needed
• Ergonomic design reduces operator hand strain during extended control-room monitoring shifts

Pelco · CVA-BAP1-10C1Y

Pelco CVA-BAP1-10C1Y Calipsa Basic Plus 10-Channel 1-Year

10-channel AI analytics with human/vehicle classification, 1-year license

• Human and vehicle object detection reduces false alarms from weather and movement
• 10-channel capacity with H.265 compression, compatible with Pelco Sarix and ONVIF
• Integrates with VideoXpert VMS platform; NDAA Section 889 compliant

Pelco · CVA-BAS1-01C1Y

Pelco CVA-BAS1-01C1Y Calipsa Basic Analytics 1-Cam

AI false alarm filtering for 1 camera on VideoXpert VMS

• Machine learning filters motion noise from weather, lighting, and animals
• 1-year subscription covers single camera channel integration
• NDAA Section 889 compliant for government deployments

Pelco · CVA-BAS1-10C1Y

Pelco CVA-BAS1-10C1Y Calipsa Basic AI 10-Channel 1-Year

AI motion filtering for 10 channels, 1-year subscription on VideoXpert

• Server-side human and vehicle detection cuts false alarms from wind, rain, and lighting
• 10 concurrent analytics channels without camera-side hardware upgrades
• NDAA Section 889 compliant for government and regulated sector use

Pelco · CVA-COR1-01C1Y

Pelco CVA-COR1-01C1Y Calipsa Core AI Analytics

AI motion analytics for single camera with human/vehicle classification

• Server-side AI filters false alarms from wind, rain, shadows, and foliage
• One-year subscription license integrates with VideoXpert VMS platform
• NDAA Section 889 compliant for government and regulated installations

Pelco · CVA-COR1-10C1Y

Pelco CVA-COR1-10C1Y Calipsa Core Cloud 10-Ch 1Yr

Cloud video analytics for 10 cameras with AI human/vehicle detection

• Filters false alarms from lighting, animals, and movement for 1-year term
• Cloud-processed alerts integrate directly into your VMS monitoring center
• NDAA Section 889 compliant for government and regulated security deployments

Pelco · CVA-HLT1-10C1Y

Pelco CVA-HLT1-10C1Y Calipsa Camera Health 10-Cam 1Y

Monitor 10 cameras for lens obstruction, defocus, tampering—1-year sub

• Detects image degradation across 10 channels with real-time alerts
• Integrates with Pelco VideoXpert VMS for unified surveillance management
• NDAA Section 889 compliant for government and enterprise deployments

Pelco · CVA-PRO1-01C1Y

Pelco CVA-PRO1-01C1Y Calipsa Pro AI Analytics 1-Cam 1Y

AI video analytics for single camera with false-alarm reduction

• Threat classification & event filtering for high-activity surveillance zones
• 1-year subscription license integrates with VideoXpert VMS deployments
• NDAA Section 889 compliant for government & critical infrastructure use

Pelco · CVA-PRO1-10C1Y

Pelco CVA-PRO1-10C1Y Calipsa Pro Cloud 10-Channel

AI video analytics for 10 cameras, 1-year cloud license, stackable

• AI-powered object detection & behavioral analysis across 10 channels
• Cloud-processed analytics with NDAA Section 889 compliance
• Stack licenses in 10-channel increments to scale coverage

Pelco · DCZ

Pelco DCZ USB Keyboard PTZ Controller

USB keyboard controller for Pelco PTZ camera systems with tactile joystick

• Dedicated hardware joystick and keys for faster PTZ control than mouse navigation
• USB plug-and-play connectivity compatible with Pelco camera systems and VMS software
• NDAA Section 889 compliant for U.S. government and critical infrastructure deployments

Pelco · HDDKIT-16TB-SAS

Pelco HDDKIT-16TB-SAS 16TB SAS Hard Drive Kit

16TB SAS drive kit for Pelco VideoXpert servers with hot-swap support

• 16TB capacity with SAS interface for sustained multi-camera recording
• Hot-swap capable for minimal downtime during maintenance or replacement
• NDAA Section 889 compliant for government and regulated deployments

Pelco · INT-CCURE

Pelco INT-CCURE VideoXpert C-CURE 9000 Integration

Bidirectional VideoXpert & C-CURE 9000 integration for unified security

• Automatic event correlation links access control alarms to video playback
• Trigger recordings directly from access events within C-CURE 9000 interface
• Software license; NDAA Section 889 compliant for government deployments

Pelco · INT-LENEL

Pelco INT-LENEL VideoXpert LenelS2 Integration License

VideoXpert and LenelS2 integration license for unified video and access control

• Bidirectional integration between VideoXpert V3.x and LenelS2 OnGuard platforms
• View live and recorded video directly in OnGuard; trigger recordings from access events
• Annual subscription license; NDAA Section 889 compliant for government facilities

Pelco · INT-LENEL-OG-73

Pelco INT-LENEL-OG-73 VideoXpert OnGuard Integration

VideoXpert V3.x integration license for OnGuard 7.3 access control

• Native camera streams and recordings surface directly in OnGuard interface
• NDAA Section 889 and TAA compliant for government procurement eligibility
• Software license eliminates need to switch between VideoXpert and OnGuard

Pelco · INT-LENEL-OG-76

Pelco INT-LENEL-OG-76 VideoXpert OnGuard Integration

VideoXpert V3.x + OnGuard 7.6 integration with native stream access

• View live streams and recordings directly in OnGuard operator interface
• Annual subscription license with NDAA Section 889 compliance for federal use
• Version-specific for OnGuard 7.6; verify patch levels before ordering

Pelco · KSC-3000U

Pelco Ndaa Compliant Ksc-3000U - Direct Mode Controller PTZ

USB-based direct mode controller designed to interface with NDAA-compliant PTZ surveillance systems

• NDAA-compliant design meets federal procurement requirements for surveillance deployments.
• USB direct mode delivers low-latency manual PTZ control without network dependency.
• Desktop form factor integrates into operator workstations and command center consoles.