Transition Networks products
-
Transition Networks
SKU: IONMM
Transition Networks IONMM Management Module 10/100 Mbps
Out-of-band management module for ION chassis with 10/100 Mbps Ethernet
- Out-of-band 10/100 Mbps Ethernet keeps management traffic off production links.
- USB CLI interface allows local config and recovery without requiring network uptime.
- TAA-compliant plug-in module integrates directly into ION chassis slots; lifetime warranty.
$534.00 $397.99 Save $136.01 -
Transition Networks
SKU: IONFP
Transition Networks IONFP Front Blank Face Plate
TAA-compliant blank face plate for ION chassis slot closure
- Fills one ION chassis slot to maintain panel integrity and block dust ingress.
- TAA compliant, qualifying it for federal and government procurement projects.
- Lifetime warranty covers long-term chassis builds with minimal replacement risk.
$11.00 $10.99 Save $0.01 -
Transition Networks
SKU: ION106-D
Transition Networks ION106-D 6-Slot Managed Industrial Switch
6-slot modular managed switch, up to 32 ports @ 10G for industrial
- 6-slot modular chassis accepts mixed fiber/copper ION modules for flexible builds.
- Supports up to 32 ports at 10G over multi-mode fiber for high-density deployments.
- DIN rail mount and industrial temp rating simplify installs in harsh field enclosures.
$891.00 $668.99 Save $222.01 -
Transition Networks
SKU: ION106-AAB-NA
Transition Networks ION106-AAB-NA 6-Slot AC Modular Chassis
6-slot modular AC chassis for scalable ION network deployments
- Holds up to 6 ION modules, letting you add interfaces or capacity without replacing the chassis.
- AC mains power simplifies rack deployment in network closets and control rooms.
- Managed operation with ION ecosystem compatibility supports mixed line-card configurations.
$1,159.00 $874.99 Save $284.01 -
Transition Networks
SKU: EO2PSE4052-111
Transition Networks EO2PSE4052-111 32-Port Gigabit PoE+ Fiber Switch
32-port Gigabit PoE+ switch with single-mode fiber uplink, DIN-rail mount
- All 32 Gigabit ports deliver IEEE 802.3at PoE+, eliminating external PSUs at remote sites.
- Single-mode fiber uplink supports runs beyond 10 km, bridging buildings without copper.
- Unmanaged, DIN-rail design deploys in minutes—no config needed, fits 19-inch panels.
$509.00 $379.99 Save $129.01 -
Transition Networks
SKU: EDS3032PR1NS
Transition Networks EDS3032PR1NS 8-Port Gigabit Unmanaged Switch
8-port gigabit unmanaged switch with DIN rail mount for industrial edge
- Eight 1 Gbps ports deliver non-blocking throughput for dense camera or sensor arrays.
- Multi-mode fiber support extends links beyond 100m and isolates runs from EMI sources.
- DIN rail mount enables direct enclosure integration with zero configuration required.
$2,165.99 -
Transition Networks
SKU: ED1100002-01
Transition Networks ED1100002-01 Single-Port Secure Device Server
Serial-to-IP converter with gigabit speed and single-mode fiber for industrial networks
- Converts serial devices to IP at 921 Kbps — fits access panels and industrial controllers.
- Single-mode fiber support extends backbone links beyond 2 km without repeaters.
- DIN-rail mount and unmanaged design eliminate SNMP config for fast industrial deployment.
$247.30 $231.99 Save $15.31 -
Transition Networks
SKU: E-100BTX-FX-06(LC)-NA
Transition Networks E-100BTX-FX-06(LC)-NA 100Base-TX TO Fiber
Copper-to-fiber media converter for 100 Mbps network extension
- Converts 100Base-TX RJ-45 to LC fiber, extending runs well beyond the 100m copper limit.
- DIN-rail mount fits panel enclosures and utility cabinets; no rack space required.
- Included stand-alone PSU enables independent deployment without PoE or bus power dependency.
$308.00 $230.99 Save $77.01 -
Transition Networks
SKU: C3221-1040
Transition Networks C3221-1040 32-Port Gigabit Unmanaged Switch
32-port gigabit unmanaged switch with single-mode fiber, DIN rail mount
- All 32 ports run 10/100/1000BaseT — no speed tiers, no bottlenecks at any node.
- Unmanaged design eliminates configuration time; plug in and the switch forwards traffic immediately.
- DIN rail mount and single-mode fiber support simplify deployment in field enclosures and long-distance backbone runs.
$1,087.00 $809.99 Save $277.01 -
Transition Networks
SKU: C3210-1040
Transition Networks C3210-1040 32-Port Gigabit Switch
32-port gigabit unmanaged switch with single-mode fiber uplinks
- All 32 gigabit ports deliver wire-speed switching with zero configuration required.
- Single-mode fiber uplinks extend network reach beyond copper's 100 m limit.
- DIN rail mount simplifies installation in industrial panels and control cabinets.
$462.00 $344.99 Save $117.01 -
Transition Networks
SKU: C3210-1014
Transition Networks C3210-1014 32-Port Gigabit Unmanaged Switch
32-port gigabit unmanaged switch, DIN-rail mount, zero config
- All 32 ports run at 1 Gbps full-duplex with no backplane oversubscription.
- Unmanaged design enables zero-config deployment — powers on and forwards traffic immediately.
- DIN-rail mount and single-mode fiber support simplify installation in distributed cabinets.
$743.00 $553.99 Save $189.01 -
Transition Networks
SKU: 25172
Transition Networks 25172 8-Port 10G Unmanaged Switch
8-port 10G fiber switch with DIN rail mount for industrial networks
- All 8 ports run full-duplex 10G over multi-mode fiber, reaching up to 400m.
- Unmanaged MAC-learning operation eliminates CLI/SNMP setup for fast deployment.
- 35mm DIN rail mount fits standard industrial enclosures with no shelf required.
$1,655.00 $1,230.99 Save $424.01 -
Transition Networks
SKU: 25160
Transition Networks 25160 PS 48VDC 10A DIN Rail Managed Switch
10-port managed switch, 48VDC 10A, DIN rail mount for field networks
- 10 managed Gigabit ports support VLAN isolation and remote port control without site visits.
- Accepts 48VDC 10A or universal AC (90–264V, 47–63 Hz) — no extra power conversion needed.
- 35mm DIN rail mount fits standard electrical enclosures; lifetime warranty backs field deployments.
$517.00 $387.99 Save $129.01 -
Transition Networks
SKU: WMBM
Transition Networks WMBM Wall Mount Bracket Kit
Wall mount bracket kit for Transition Networks media converters
- TAA-compliant wall mount kit supports non-racked and standard 19-inch rack installs.
- Includes bracket assembly and full mounting hardware for rapid field deployment.
- Lifetime warranty reduces long-term replacement risk across multi-site rollouts.
$24.00 $23.99 Save $0.01 -
Transition Networks
SKU: SPS-UA12DHT-NA
Transition Networks SPS-UA12DHT-NA 18W Universal AC Power Adapter
18W universal adapter with 90–264V input for global networking gear
- Universal 90–264V AC input works across global sites without step-down transformers.
- Stable +12VDC/18W output protects serial servers and media converters from voltage sag.
- Lifetime warranty and compact 5.2×4.8×2.3 in footprint simplify long-term deployments.
$48.00 $47.99 Save $0.01 -
Transition Networks
SKU: SPOEB1039-105-NA
Transition Networks SPOEB1039-105-NA Fiber Media Converter
Copper-to-fiber media converter, 1.2 miles, 10/100 Mbps auto-negotiating
- Extends copper Ethernet over multimode fiber to 1.2 miles, bypassing EMI-prone cable runs.
- Auto-negotiates 10/100 Mbps on the RJ45 side, supporting both legacy and current-gen devices.
- TAA-compliant standalone unit with a lifetime warranty; no managed switch required to deploy.
$398.00 $297.99 Save $100.01 -
Transition Networks
SKU: SPOEB1013-105-NA
Transition Networks SPOEB1013-105-NA Fiber Media Converter
Copper-to-fiber converter spanning 1.2 miles over multimode
- Spans up to 1.2 miles over multimode fiber, eliminating repeaters on long runs.
- Auto-negotiates 10/100 Mbps, integrating legacy and modern Ethernet devices seamlessly.
- TAA compliant and lifetime warranty backed, suitable for government and enterprise deployments.
$360.00 $269.99 Save $90.01 -
Transition Networks
SKU: SPOEB1011-105-NA
Transition Networks SPOEB1011-105-NA Gigabit PoE Media Converter
Gigabit PoE media converter with 1.2-mile fiber reach, DIN rail mount
- Extends fiber reach up to 1.2 miles, placing edge devices far beyond copper limits.
- Integrated PoE eliminates separate power runs when retrofitting conduit-constrained sites.
- DIN rail mount and lifetime warranty simplify panel integration and long-term support planning.
$360.00 $269.99 Save $90.01 -
Transition Networks
SKU: SISTG1040-211-LRT-B
Transition Networks SISTG1040-211-LRT-B Gigabit Media Converter
Gigabit fiber-to-copper converter, DIN rail mount, unmanaged
- Sustains full 1 GBps bidirectional throughput between fiber and copper with no bottlenecks.
- Unmanaged operation requires zero configuration—connect fiber and copper, apply power, done.
- Integral DIN rail brackets mount to standard 35mm rail with no additional hardware needed.
$397.50 $296.99 Save $100.51 -
Transition Networks
SKU: SGPAT1040-105-NA
Transition Networks SGPAT1040-105-NA Fiber Media Converter
Copper-to-fiber media converter with PoE+ for extended network runs
- Bridges copper to fiber at 10/100 Mbps, eliminating distance limits on Ethernet runs.
- PoE+ output powers dome cameras, PTZ units, or IP speakers without added DC wiring.
- 8K MAC address table supports mid-scale mixed-device deployments without saturation risk.
$594.00 $443.99 Save $150.01






