SDC products
-
SDC
SKU: RMB
SDC/Security Door Controls RMB Buzzer 12/24V AC/DC Controller
Multi-door buzzer controller for 12/24V AC/DC systems, supports up to 63 doors
- Controls up to 63 independent doors from one module, cutting per-door relay costs.
- Accepts DESFire, MIFARE, NFC, and 125 kHz creds—mix types during phased upgrades.
- Stores 250,000 users onboard for offline operation across 12/24V AC/DC facilities.
$53.00 $37.99 Save $15.01 -
SDC
SKU: RIM-CYL-KA
SDC RIM-CYL-KA Keyed-Alike Cylinder Module
4-door wired controller with keyed-alike cylinders for multi-site consistency
- Controls up to 4 doors per module over OSDP or TCP/IP wired connections.
- Keyed-alike cylinders let one key profile serve all doors, reducing key management overhead.
- Supports up to 250,000 users and accepts HID credentials with lifetime warranty coverage.
$43.00 $26.99 Save $16.01 -
SDC
SKU: PTH-10Q
SDC Security Door Controls PTH-10Q Ten Conductor Power Transfer
10-conductor controller for up to 4 doors with 250k user capacity
- Routes 10 discrete 28 AWG circuits at 1A/30VDC through the hinge—no conduit needed.
- Supports up to 4 doors and 250,000 user records via OSDP and TCP/IP protocols.
- Compatible with HID iClass and Prox readers; lifetime warranty included.
$239.00 $145.99 Save $93.01 -
SDC
SKU: PT-5
SDC PT-5 UL Listed Concealed Power Controller
UL Listed concealed controller for HID-based single-door access systems
- UL Listed certification satisfies commercial fire and safety code without extra variance review.
- Native HID credential compatibility drops into existing card-reader infrastructures without adapters.
- Compact 2"×1"×3" concealed form factor preserves door frame aesthetics in finished spaces.
$77.00 $47.99 Save $29.01 -
SDC
SKU: PT-3V
SDC PT-3V Stainless Steel Armored Loop Controller
4-door stainless steel controller for outdoor access networks, 250K credentials
- Controls 4 independent doors from one unit, cutting controller count on multi-entrance sites.
- Stores 250,000 HID credentials locally, eliminating capacity constraints in large deployments.
- OSDP and TCP/IP support enables clean integration into mixed-vendor access control networks.
$58.00 $57.99 Save $0.01 -
SDC
SKU: PSB560V36
SDC PSB560V36 Pressure Sense Bar 36 Inch
36" pressure sense bar for multi-door access control at 24VDC
- Dual solid-state sensors eliminate single-point egress failure across up to 63 doors.
- OSDP and TCP/IP support integrates with enterprise access control, up to 250,000 users.
- Runs on 24VDC ±10% at 115 mA peak—fits standard access control power supplies directly.
$439.00 $258.99 Save $180.01 -
SDC
SKU: PR-1000
SDC/Security Door Controls PR-1000 Power Regulator
Centralized power regulator for HID access control systems
- Stabilizes voltage across multiple door strikes, eliminating solenoid failures under parallel load.
- Native HID compatibility integrates directly with existing readers, controllers, and wiring infrastructure.
- Centralized single-point power management simplifies troubleshooting in multi-door commercial deployments.
$78.00 $55.99 Save $22.01 -
SDC
SKU: PCB114B01-A
Sdc/Security Door Controls PCB114B01-A 1580 Series Controller
HID credential controller for 1580 Series EmLock door access systems
- Processes HID credentials locally at the door, reducing latency and central panel load.
- Accepts 12V or 24V supply, fitting existing commercial power infrastructure without rewiring.
- Pairs natively with 1580 Series electromagnetic locks for reliable latch control per door.
$62.00 $44.99 Save $17.01 -
SDC
SKU: MS-20D
SDC MS-20D Mortise Lock Latch & Bolt Monitor
Mortise deadbolt monitor for up to 4 doors with HID integration
- Monitors latch and deadbolt position across up to 4 doors from a single device.
- OSDP and TCP/IP wired connectivity integrates natively with HID and third-party panels.
- DPDT output rated 5A at 30VDC feeds door status directly to panel inputs and alarm logic.
$265.00 $161.99 Save $103.01 -
SDC
SKU: MS-20
SDC/Security Door Controls MS-20 Mortise Bolt & Latch Monitor
TCP/IP networked mortise strike with bolt and latch position monitoring
- Dual bolt-and-latch sensing eliminates ambiguity between secured and pulled-closed states.
- TCP/IP integration delivers real-time door status to access control platforms over the network.
- Field-reversible strike fits left or right swing on-site, eliminating duplicate SKU inventory.
$196.00 $119.99 Save $76.01 -
SDC
SKU: MS-19
SDC MS-19 Mortise Lock Schlage L4 Monitor
Mortise deadbolt for up to 4 doors with Schlage L4 monitoring
- SPDT contact reports physical deadbolt position to any access control panel in real time.
- Rated 30VDC / 5A for reliable duty across up to 4-door commercial deployments.
- Retrofits Schlage L400, Best 48H, Corbin Russwin DL4100, Sargent 4870, and Yale 350 locks.
$311.00 $189.99 Save $121.01 -
SDC
SKU: MS-18D
SDC MS-18D Mortise Lock Deadbolt Monitor
4-door mortise deadbolt monitor with OSDP and TCP/IP networking
- Monitors deadbolt status across 4 mortise locks from a single 30VDC wired supply.
- Dual OSDP and TCP/IP comms integrate with HID systems—no bridge or translator needed.
- DPDT 5A relay outputs deliver deterministic locked/unlocked state to hardwired panels.
$210.00 $128.99 Save $81.01 -
SDC
SKU: MS-18
SDC Security Door Controls MS-18 Deadbolt Monitor
TCP/IP networked deadbolt monitor with real-time lock status feedback
- SPDT contact closure rated 5A @ 30VDC integrates directly into hardwired control panels.
- TCP/IP connectivity delivers real-time deadbolt position feedback to networked panels or VMS.
- Compact 4-13/16" x 11/16" profile fits standard mortise cavities with no frame modification.
$162.00 $98.99 Save $63.01 -
SDC
SKU: MS-16D
SDC MS-16D Mortise Lock Latch Monitor
Mortise deadbolt monitor for 4-door networks with HID integration
- Single unit monitors up to 4 mortise locks, cutting per-door hardware and panel cost.
- DPDT dry-contact relay reports deadbolt state at 5A/30VDC with no external power conditioning.
- Lifetime warranty supports retrofit deployments without full mortise hardware replacement.
$196.00 $119.99 Save $76.01 -
SDC
SKU: MS-16
SDC/Security Door Controls MS-16 Mortise Lock Latch Monitor
Mortise lock latch monitor with HID integration and 30VDC operation
- SPDT contacts (NO/NC, 5A @ 30VDC) deliver verified latch state to your access control panel.
- Runs on standard 30VDC strike supply — no separate monitoring circuit or power tap required.
- 4-13/16" × 11/16" face plate drops into standard mortise pocket with no frame modification.
$162.00 $98.99 Save $63.01 -
SDC
SKU: MS-14D
SDC MS-14D Cylinder Latch Monitor DPDT
DPDT cylinder latch monitor for up to 4 doors with OSDP/TCP/IP
- DPDT dry-contact relay at 30VDC/5A confirms latch engagement on cylindrical locks.
- Single unit monitors up to 4 doors, cutting panel input channels and per-door cabling.
- Native OSDP and TCP/IP support enables HID credential integration without gateway translation.
$196.00 $119.99 Save $76.01 -
SDC
SKU: MS-14
SDC MS-14 Cylindrical Latch Monitor
Real-time latch monitoring for HID access control systems
- SPDT dry contact rated 5A @ 30VDC connects directly to any access control panel input.
- Fits standard 4⅞" ANSI strike pocket, retrofitting existing cylindrical lock hardware.
- Lifetime warranty backs continuous real-time latch state feedback for audit trail compliance.
$162.00 $98.99 Save $63.01 -
SDC
SKU: MS-12D
SDC MS-12D Cylinder Latch Monitor DPDT
DPDT cylinder latch monitor for up to 4 doors with OSDP/TCP/IP
- DPDT relay rated 5A @ 30VDC integrates directly with legacy and IP door controllers.
- Monitors up to 4 deadbolt strikes from one device, cutting wiring runs and panel I/O.
- Native OSDP and TCP/IP support enables direct integration with major VMS platforms.
$196.00 $119.99 Save $76.01 -
SDC
SKU: MS-12
SDC/Security Door Controls MS-12 Cylinder Latch Monitor
Real-time deadbolt strike monitor for access control audit trails
- SPDT contact confirms actual latch engagement, not just solenoid activation.
- Fits standard 2¾" ANSI strike cutouts for drop-in cylindrical lock integration.
- 30VDC hardwired operation ties into existing access control power rails directly.
$162.00 $98.99 Save $63.01 -
SDC
SKU: MR
SDC Security Door Controls MR Manual Reset 600 Series
Manual reset accessory for SDC 600 Series power supplies
- Resets 600 Series power supply faults without power cycling or external tools.
- Mounts directly into the 600 Series enclosure for clean, in-cabinet installation.
- Lifetime warranty backs field-deployed fault-recovery operations long-term.
$48.00 $34.99 Save $13.01







