Showing Results for Power & UPS
-
Save $1,666.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3D8P2M8E8M2-WPV-IU03 250W power suppl
- 16 individually managed outputs enable selective outlet cycling and remote power monitoring.
- 24 auxiliary 12VDC outputs support cameras, card readers, and locks from one rack unit.
- Standard 19-inch EIA rack-mount form factor simplifies integration into existing security racks.
Free shipping over $499$4,855.00 $3,188.99 Save $1,666.01 -
Save $1,701.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3D8P2M8NLCE8M2-WPV-IU07 250W power su
- Selectable 12V/20A or 24V/10A primary output supports legacy and modern lock controllers.
- Eight individually fused 2.5A Class 2 ports eliminate shared-circuit risk across readers and sensors.
- Integrated D8 Bus1/Bus2 distribution block reduces external panel wiring in multi-door deployments.
Free shipping over $499$4,957.00 $3,255.99 Save $1,701.01 -
Save $1,586.01
Lifesafety Power FPO250/250-3D8P2M8PE8M2/P16-C 250W power supply
- Dual-voltage output—12VDC/20A or 24VDC/10A—supports mixed access control loads from one unit.
- Eight independently assignable 2.5A Class 2 outputs eliminate external fusing on most terminal devices.
- E8 enclosure (36H×30W×6.5D in.) rack- or wall-mounts to centralize DC distribution in tight spaces.
Free shipping over $499$4,623.00 $3,036.99 Save $1,586.01 -
Save $2,356.01
Lifesafety Power FPO250/250-3D8P3M8NLCE12M 250W power supply 20A
- Eight 3A-fused outputs isolate downstream faults, preventing cascade shutdown across zones.
- Selectable 12VDC/20A or 24VDC/10A output supports mixed access control and video loads.
- Dual-bus supervision per output enables independent failover across physically separated subsystems.
Free shipping over $499$6,866.00 $4,509.99 Save $2,356.01 -
Save $3,481.01
Lifesafety Power FPO250/250-3D8P5M8PNLCE12M/P24-A 250W power supp
- Eight Class 2 outputs at 2.5A each eliminate per-zone power supplies and extra wiring.
- Selectable 12V or 24V DC output lets you match existing panel voltage at installation.
- 20A at 12V or 10A at 24V aggregate capacity supports mixed access control deployments.
Free shipping over $499$10,144.00 $6,662.99 Save $3,481.01 -
Save $3,004.01
Lifesafety Power FPO250/250-4C84D8PNLCE12-WP-INO03 250W power sup
- Selectable 12V/20A or 24V/10A output matches lock and reader requirements at config time.
- Eight independently fused 3A relay outputs eliminate external relay modules in multi-door builds.
- Eight Class 2 auxiliary outputs at 2.5A each power readers and sensors from one enclosure.
Free shipping over $499$8,754.00 $5,749.99 Save $3,004.01 -
Save $2,040.01
Lifesafety Power FPO250/250-4C8P4D8PE12S Power Systems 500W Dual
- 500W dual 12V/24V output supports up to 64 controlled loads in one UL-listed enclosure.
- 32 relay outputs (4×C8P) programmable failsafe or failsecure at 2.5A per zone, no external relays needed.
- 32 auxiliary outputs (4×D8P) power sensors and REX devices with per-zone dual-buss voltage selection.
Free shipping over $499$5,947.00 $3,906.99 Save $2,040.01 -
Save $2,465.01
Lifesafety Power FPO250/250-4D84M8NLCE12S 250W power supply 20A
- Selectable primary output—12VDC/20A or 24VDC/10A—integrates mixed-voltage devices on one supply.
- Eight independently fused 3A DC auxiliary outputs isolate faults without taking down the full system.
- Per-port Bus1/Bus2 assignment lets you segment cameras, readers, and alarms on separate protected rails.
Free shipping over $499$7,184.00 $4,718.99 Save $2,465.01 -
Save $371.01
Lifesafety Power FPO250/250-4D8PE2 2 x 250W power supply 8 relay
- Two independent 250W channels, each selectable 12VDC/20A or 24VDC/10A, support mixed fleets.
- Four Class 2 auxiliary outputs at 2.5A each isolate sensor and access control loads from camera power.
- Per-output Bus1/Bus2 assignment partitions zones across separate supervision circuits without extra relays.
Free shipping over $499$1,083.00 $711.99 Save $371.01 -
Save $964.01
Lifesafety Power FPO250/250-4M8PNLCSD16E4 250W power supply 20A
- 250W capacity supports 8–12 full-power IP cameras or access readers without undersizing.
- Eight individually supervised 2.5A outputs isolate faults so one short won't kill the system.
- Selectable 12VDC/24VDC output covers both legacy analog and modern IP devices on one supply.
Free shipping over $499$2,810.00 $1,845.99 Save $964.01 -
Save $3,315.01
Lifesafety Power FPO250/250-5D8P3M8NLCE12M/P24-A Mercury ProWire
- 500W dual-voltage output supports locks, readers, and ancillary devices in one unit.
- 24 managed lock outputs enable power sequencing and load-shedding across multi-door deployments.
- 40 auxiliary outputs eliminate individual UPS modules, centralizing power for up to 40 circuits.
Free shipping over $499$9,662.00 $6,346.99 Save $3,315.01 -
Save $3,315.01
Lifesafety Power FPO250/250-5D8P3M8PNLCE12M/P24-B 250W power supp
- 250W capacity supports 20A @ 12V or 10A @ 24V across one module.
- Eight Class 2 outputs at 2.5A each keep door hardware UL-compliant.
- Dual-bus architecture enables zone segregation without extra feeder runs.
Free shipping over $499$9,662.00 $6,346.99 Save $3,315.01 -
Save $1,020.01
Lifesafety Power FPO250/250-B10010D8NLCE8M2 250W power supply
- Dual-bus outputs deliver 12VDC@20A or 24VDC@10A from one cabinet.
- Eight 3A auxiliary outputs each assign independently to Bus 1 or Bus 2.
- E8 enclosure (36H×30W×6.5D in) supports B100 battery backup and NLC supervision.
Free shipping over $499$2,973.00 $1,952.99 Save $1,020.01 -
Save $840.01
Lifesafety Power FPO250/250-B1002C82D8E6M1 250W power supply 20A
- Delivers 20A@12VDC or 10A@24VDC to support mid-scale multi-door lock deployments.
- Eight relay outputs are individually fused at 3A with per-output FAI, failsafe, or failsecure mode.
- Eight auxiliary DC outputs are Bus1/Bus2 assignable, supporting multi-bus campus architectures.
Free shipping over $499$2,448.00 $1,607.99 Save $840.01 -
Save $530.01
Lifesafety Power FPO250/250-B1002D8E4M1 250W power supply 20A/12
- Delivers 20A at 12VDC or 10A at 24VDC via jumper selection for mixed-voltage sites.
- Eight independently fused 3A outputs with Bus1/Bus2 switching isolate load faults per branch.
- Fixed 250W output suits stable-grid installs where UPS protection is managed separately.
Free shipping over $499$1,547.00 $1,016.99 Save $530.01 -
Save $2,288.01
Lifesafety Power FPO250/250/250-3C83D8PE12M 250W power supply
- 8 independently fused 3A relay outputs support FAI, failsafe, or failsecure per door.
- Selectable 12VDC/24VDC output eliminates separate supplies on mixed-voltage deployments.
- 8 Class 2 auxiliary outputs at 2.5A each power REX buttons, sensors, and indicators.
Free shipping over $499$6,668.00 $4,379.99 Save $2,288.01 -
Save $3,262.01
Lifesafety Power FPO250/250/250-3C85D8PE12M/P24-A 3 x 250W power
- Three 250W modules deliver 750W aggregate capacity for 20+ door deployments.
- 24 relay outputs support magnetic locks, strikes, and motor deadbolts at 12 or 24VDC.
- 40 Class 2 auxiliary outputs power readers, sensors, and intercoms on isolated buses.
Free shipping over $499$9,506.00 $6,243.99 Save $3,262.01 -
Save $3,587.01
Lifesafety Power FPO250/250/250-3D8P5M8PNLCE12M/P24-B Mercury Pro
- 750W total output powers 40 managed lock outputs and 24 auxiliary channels from one shelf.
- Centralized distribution eliminates separate power runs per zone, reducing installation labor.
- 120 VAC single-phase input integrates into standard mains without special service requirements.
Free shipping over $499$10,454.00 $6,866.99 Save $3,587.01 -
Save $2,127.01
Lifesafety Power FPO250/250/250-4C84D8E12S 250W power supply 20A
- Delivers 20A at 12VDC or 10A at 24VDC from a single 250W supply.
- 32 relay lock outputs, each 3A fused with per-output FAI/failsafe/failsecure selection.
- 32 isolated DC auxiliary outputs eliminate external relay banks in cabinet installs.
Free shipping over $499$6,198.00 $4,070.99 Save $2,127.01 -
Save $3,835.01
Lifesafety Power FPO250/250/250-8M8PNLCE12M/P24-A 250W power supp
- Eight isolated Class 2 outputs at 2.5A each prevent single-fault cascade failures.
- Selectable 12V/20A or 24V/10A operation supports legacy and modern access control hardware.
- 250W total capacity covers mid-scale deployments of 8–12 IP cameras or 4–6 access panels.
Free shipping over $499$11,177.00 $7,341.99 Save $3,835.01 -
Save $159.01
Lifesafety Power FPO250/E-BOXED Smart DC Power Supply/Charger 208
- Accepts 208–230VAC mains input, compatible with standard commercial electrical infrastructure.
- Fully enclosed BOXED form factor mounts to DIN rail, wall bracket, or cabinet surface.
- Integrated charging circuit supports battery backup systems alongside regulated DC output.
Free shipping over $499$465.00 $305.99 Save $159.01 -
Save $162.01
Lifesafety Power FPO75-2D8E1 75W power supply 6A/12V or 3A/24V 1
- 16 independently fused 3A outputs eliminate single failure points across distributed loads.
- Per-output Bus1/Bus2 selection isolates zones or backup domains during commissioning.
- Compact 14H×12W×4.5D-inch enclosure fits standard DIN rail or wall-mount security cabinets.
Free shipping over $499$474.00 $311.99 Save $162.01 -
Save $255.01
Lifesafety Power FPO75-2D8E4M 250W PS 20A/12V or 10A/24V 24 DC au
- Selectable 20A/12V or 10A/24V output eliminates buck/boost conversion on mixed-voltage sites.
- Four independent 2.5A Class 2 channels isolate lock, reader, and RTE circuits without daisy-chaining.
- Dual-bus per-output assignment prevents single-fault cascade across up to 24-door deployments.
Free shipping over $499$744.00 $488.99 Save $255.01 -
Save $303.01
Lifesafety Power FPO75-2D8E4M1 75W power supply 6A/12V or 3A/24V
- Eight individually fused 3A outputs prevent cascade failures across locks and readers.
- Selectable 12V/24V per output supports mixed device loads from a single 75W supply.
- Dual-bus architecture enables fault isolation in supervised access control deployments.
Free shipping over $499$885.00 $581.99 Save $303.01 -
Save $162.01
Lifesafety Power FPO75-2D8PE1 75W power supply 6A/12V or 3A/24V
- 16 supervised Class 2 outputs (2.5A each) isolate faults without cascading failures.
- Dual-bus architecture segments 12V and 24V loads in one panel, reducing wiring complexity.
- E1 enclosure (14H×12W×4.5D in.) mounts on 19-inch rack rails or wall on 4-inch centers.
Free shipping over $499$474.00 $311.99 Save $162.01 -
Save $221.01
Lifesafety Power FPO75-2D8PE2M 75W power supply 6A/12V or 3A/24V
- Delivers 6A@12VDC or 3A@24VDC from one AC input to fit mixed-voltage site designs.
- Eight independently current-limited 2.5A outputs reduce homerun wiring across access zones.
- Per-output Bus1/Bus2 assignment enables zone isolation without additional distribution hardware.
Free shipping over $499$645.00 $423.99 Save $221.01 -
Save $191.01
Lifesafety Power FPO75-B1002D8E1 Std Pow Sys 75W Dual Voltage
- Dual 12V/24V zone-selectable outputs eliminate separate supplies in mixed-voltage installs.
- Integrated fire alarm disconnect relay automatically unlocks doors on alarm—no aux wiring needed.
- Low-battery cutoff and dedicated fast charger extend SLA/lithium backup battery service life.
Free shipping over $499$558.00 $366.99 Save $191.01 -
Save $202.01
Add to Cart The item has been addedLifesafety Power FPO75-B100C4D8E1 75W Dvps 4 Lock Control Out
- 75W DVPS powers four 3A-fused lock control outputs at 12V or 24V.
- Eight additional fused auxiliary outputs support sensors, REX, and door position switches.
- 120 VAC input fits standard dedicated circuits; E1 enclosure mounts near the access panel.
Free shipping over $499$591.00 $388.99 Save $202.01 -
Save $245.01
Lifesafety Power FPO75-B100C4D8E1M 75W power supply 6A/12V 12V 2
- 12 fused outputs (4 relay lock + 8 auxiliary DC) consolidate door and device power.
- Per-output failsafe/failsecure/FAI selection meets life-safety door locking requirements.
- Adjustable 5–18V @ 4A output supports legacy non-standard-voltage devices without regulators.
Free shipping over $499$715.00 $469.99 Save $245.01 -
Save $225.01
Lifesafety Power FPO75-B100C4D8E2 Power supply board 75W 6A/12V
- Delivers 6A at 12VDC or 3A at 24VDC, eliminating separate supplies in mixed-voltage installations.
- 75W capacity supports 6–12 megapixel cameras or mixed PoE and non-PoE endpoints from one board.
- Board-level form factor integrates into cabinet or DIN-rail assemblies for centralized power distribution.
Free shipping over $499$656.00 $430.99 Save $225.01 -
Save $310.01
Add to Cart The item has been addedLifesafety Power FPO75-B100C4D8E2S 75W PS 6A/12V or 3A/24V 12V 2
- Dual primary output (6A/12V or 3A/24V) supports mixed lock ecosystems from one 75W unit.
- Four 3A relay outputs with per-relay FAI/failsafe/failsecure selection cut multi-door wiring time.
- Eight 3A auxiliary outputs with Bus1/Bus2 assignment eliminate external multiplexing hardware.
Free shipping over $499$904.00 $593.99 Save $310.01 -
Save $326.01
Add to Cart The item has been addedLifesafety Power FPO75-B100C4D8E2X 75W power supply 6A/12V or 3A
- Delivers 6A/12V or 3A/24V primary output plus adjustable 5–18VDC at 4A for legacy devices.
- Four relay outputs support failsafe, failsecure, or FAI logic—each fused at 3A for circuit protection.
- Eight auxiliary DC outputs assignable to Bus1 or Bus2 prevent cross-loading across independent control circuits.
Free shipping over $499$952.00 $625.99 Save $326.01 -
Save $308.01
Lifesafety Power FPO75-B100C4D8E4M Power supply board 75W 6A/12V
- 75W board delivers 6A/12V and 3A/24V outputs for multi-door access control runs.
- Four 3A relay lock outputs plus eight 3A auxiliary DC outputs support large deployments.
- Ships with Mercury/Lenel backplate for drop-in integration into standard enclosures.
Free shipping over $499$898.00 $589.99 Save $308.01 -
Save $225.01
Lifesafety Power FPO75-B100C4D8PE2 PSB 75W 6A/12V or 3A/24V Seco
- Selectable 6A/12V or 3A/24V output covers most door locks and reader loads.
- 4 independently fused 3A relay outputs isolate faults without taking down adjacent circuits.
- Class 2 topology meets NEC/CEC low-voltage rules, eliminating conduit separation requirements.
Free shipping over $499$656.00 $430.99 Save $225.01 -
Save $424.01
Lifesafety Power FPO75-B100C4D8PE2M/P4-A 75W PS 6A/12V or 3A/24V
- Selectable 6A/12V or 3A/24V output powers lock actuators without extra supplies.
- Four independently fused relay outputs support failsafe or failsecure mode per door.
- Eight Class 2 auxiliary outputs distribute sensor and indicator loads across two buses.
Free shipping over $499$1,238.00 $813.99 Save $424.01 -
Save $424.01
Lifesafety Power FPO75-B100C4D8PE2M/P4-C 75W PS 6A/12V or 3A/24V
- Selectable 12V/6A or 24V/3A output supports mag-lock and solenoid strike installs from one unit.
- 4 relay lock outputs (3A each) with per-output FAI, failsafe, or failsecure logic eliminate external relay racks.
- 8 auxiliary Class 2 outputs at 2.5A each cover sensors, LEDs, and signaling across 4–8 door zones.
Free shipping over $499$1,238.00 $813.99 Save $424.01
