DMP · 323

DMP 323 56 VA Wire-In Transformer

56 VA wire-in transformer for TCP/IP security systems

• 56 VA power rating supports hardwired security and access control system loads.
• TCP/IP communication enables integration into networked, centrally monitored installations.
• Wire-in installation suits both new construction and retrofit security deployments.

DMP · 324

DMP 324 100VA Wire-In Transformer

100VA wire-in transformer for TCP/IP security systems

• Delivers 16VAC/100VA sustained output for parallel charging of four or more backup batteries.
• Designed for DMP XR150 and XR550 panels where internal power stage is insufficient.
• Wire-in design integrates directly into facility mains—no external PSU or adapter required.

DMP · 324P

DMP 324P 100 VA Wire-In Transformer

100 VA step-down transformer for hardwired cabinet security systems

• 100 VA capacity supports simultaneous card readers, mag-locks, and controllers on one supply.
• Wire-in hardwired mount eliminates loose outlet connections for cleaner cabinets and audit compliance.
• TCP/IP protocol support integrates directly into networked access control architectures.

DMP · 327

DMP 327 50 VA Plug-In Transformer

50 VA plug-in transformer for TCP/IP security systems

• Delivers 16.5 VAC at 50 VA to power readers, strikes, and door-control circuits.
• Plugs directly into a wall outlet — no enclosure, rack mount, or distribution cabinet needed.
• Specified for DMP XR150, XR550, and XT75 panels; verify compatibility before ordering.

DMP · 364/20

DMP 364/20 1.3 Ah 12 VDC Rechargeable Battery

12 VDC 1.3 Ah rechargeable battery for access control backup power

• 12 VDC / 1.3 Ah sealed lead-acid cell delivers ~2–3 hrs standby hold-up power.
• Sealed construction requires zero maintenance and eliminates spill risk at install.
• Drop-in fit for DMP XT and XR Series panels; no additional interface hardware needed.

DMP · 365/4

DMP 365/4 9.0 Ah 12 VDC Battery

12 VDC sealed lead-acid backup for security panels and access control

• Delivers 9.0 Ah at 12 VDC, supporting ~4.5 hours runtime at a 2 A panel load.
• Sealed lead-acid construction requires no electrolyte maintenance and suits indoor cabinet mounting.
• Rated for DMP XT Series and XR Series control panels; verify panel's required Ah before ordering.

DMP · 366/2

DMP 366/2 18.0 Ah VDC Lead-Acid Battery

18.0 Ah lead-acid battery backup for security and access control systems

• 18.0 Ah / 12VDC sealed lead-acid chemistry sustains panel ops during AC loss.
• Sold as a two-unit package, enabling redundant battery banks in XT/XR panels.
• Fits DMP XT and XR Series directly; installs with standard terminals and wrench.

DMP · 368/10

DMP 368/10 5.0 Ah 12 VDC Lead-Acid Battery

12 VDC 5.0 Ah lead-acid backup for access control systems

• 5.0 Ah / 12 VDC output keeps DMP XT and XR Series panels live during mains failure.
• Ships in a 10-unit pack, streamlining multi-panel deployments and spare inventory stocking.
• Direct panel integration at 12 VDC requires no converters or regulators at the terminal.

DMP · 369/4

DMP 369/4 7.0 Ah 12 VDC Lead-Acid Battery

12V sealed lead-acid battery for access control backup power

• 7.0 Ah at 12 VDC sustains door controllers and readers for hours during AC loss.
• Sealed lead-acid chemistry requires zero maintenance inside panels or enclosures.
• Fits standard cabinet installs at 12.5" W × 9.5" H × 3.75" D with no voltage conversion.

DMP · 376

DMP 376 12 Volt Wall Plug-In Power Supply

12V DC wall-plug power for DMP access control and alarm panels

• Delivers regulated 12V DC at 600mA to power readers, locks, and alarm auxiliaries.
• Plugs into standard 120V AC outlet — no rack hardware or dedicated power infrastructure needed.
• Integrates directly with DMP 1117 and 1118 systems for straightforward distributed deployments.

DSC · HS65WPSNA

DSC HS65WPSNA Power Supply 12VDC 3.5A

Wall-mount 12VDC 3.5A power supply for access control and door locks

• 12 VDC 3.5A power supply for access control devices
• 16.5 VAC input for security power distribution
• Wall-mount form factor for cabinet installations

Eaton · 5P1000R

Eaton 5P 1000VA 770W 120V Line-Interactive UPS 5-15P - 5P1000R

1000VA line-interactive uninterruptible power supply designed for small-to-medium office deployments, server closets, and access control systems

• 1000VA / 770W line-interactive UPS with AVR
• Automatic voltage regulation responds to sags and surges
• Supports up to 5 networked devices at typical load

Eaton · 103003055

Eaton Industrial Relay Card - 103003055

N expansion relay module designed to extend discrete relay output capacity in industrial control and security systems

• Industrial relay card for Eaton control platforms
• Modular relay expansion isolates load switching from logic
• Reduces electromagnetic interference on main control board

Eaton · 103006348-001

Eaton Kit (Harness Extention ERM to UPS) - 103006348-001

Harness extension kit designed to connect ERM (Environmental Monitoring Relay) modules to Eaton UPS systems where the standard cable run is

• Harness extension kit for ERM module to UPS cable runs
• Adds reach when standard cable run is insufficient
• Preserves ERM connectivity for distant rack placement

Eaton · 124100028-001

Eaton Powerware 9355 UPS (20 and 30kVA 3-Breaker - 124100028-001

• 3-breaker maintenance bypass for Powerware 9355 20/30kVA
• Controlled transfer between utility, load, and UPS isolation
• Service UPS without interrupting downstream load

ELK Products · ELK-SWS

ELK Products Battery Shelf - ELK-SWS

Battery shelf designed to support backup power distribution in access control installations

• Battery shelf organizes backup batteries inside ELK enclosures
• Drops into standard ELK security cabinet for clean install
• Supports backup power distribution for access control loads

ELK Products · ELK-120

ELK Products ELK-120 Security Credential Accessory

8VDC credential accessory for ELK access control systems

• 8VDC credential accessory for ELK access and security panels
• 3 x 5 x 1.25 in housing for in-panel or surface mounting
• Microphone-supported integration for audio-enabled access control

ELK Products · ELK-12120

ELK Products ELK-12120 ELK Security Accessory

12V 12Ah lead acid battery for ELK security panel backup power

• 12V 12Ah sealed lead-acid backup battery for security panels
• 20-hour discharge rate sustains panel and door strikes during outages
• 8.03 lb cell fits standard ELK and 3rd-party panel battery bays

ELK Products · ELK-1213

ELK Products ELK-1213 ELK Security Accessory

12V sealed lead-acid backup battery for ELK security systems

• 12V 1.3Ah compact backup battery for low-draw alarm panels
• 20-hour discharge rate supports small panels through AC loss
• 1.89 lb sealed lead-acid cell for in-panel mounting

ELK Products · ELK-12180

ELK Products ELK-12180 12V 18Ah Lead Acid UPS Battery

12V 18Ah lead acid battery for security system backup power

• 12V 18Ah lead-acid UPS battery - 900 Wh stored energy reserve
• 20-hour rate sustains door strikes, maglocks, and panel displays
• 11.44 lb cell fits standard security and UPS enclosure trays

ELK Products · ELK-12260

ELK Products ELK-12260 12V 26Ah Backup Battery

12V 26Ah sealed lead-acid backup for security panels and access control

• 12V 26Ah sealed lead-acid for long-duration backup runtime
• Supports access control, alarm panels, and surveillance recorders
• 16.06 lb cell for medium-to-large enclosure battery bays

ELK Products · ELK-1233

ELK Products ELK-1233 ELK Security Accessory

12V backup battery for ELK security panels during power loss

• 12V 3.3Ah backup battery for ELK panels and access integrations
• 20-hour discharge rate supports panel boards through AC loss
• 2.75 lb compact cell for in-enclosure mounting

ELK Products · ELK-124

ELK Products ELK-124 TCP/IP Security Accessory

TCP/IP accessory for ELK security systems with 8VDC low-voltage operation

• TCP/IP networked security accessory for ELK panel deployments
• 8VDC operation, 200 mA nominal draw - fits standard aux budgets
• 4.375 x 6.5 x 2 in housing for surface or in-cabinet install

ELK Products · ELK-1250

ELK Products ELK-1250 ELK Security Accessory

12V sealed lead-acid backup battery for ELK security panels

• 12V 5Ah sealed lead-acid backup battery for security panels
• Operates -4 to 140 degrees F for unconditioned cabinet installs
• 3.59 lb cell fits standard ELK and 3rd-party panel battery bays

ELK Products · ELK-1280

ELK Products ELK-1280 ELK Security Accessory

12V DC controller for ELK security systems with 8Ah battery backup

• 12V 8Ah controller battery for ELK security control deployments
• Operates -4 to 140 degrees F for unconditioned cabinet installs
• 5.17 lb cell fits standard panel battery compartments

ELK Products · ELK-964B20

ELK Products ELK-964B20 Master Power Switch

Centralized power control for ELK security systems and access devices

• Master power switch for centralized security system control
• Wall or rack mount placement for IT closet and head-end rooms
• Cuts power to ELK security loads from a single switch position

ELK Products · ELK-BLT

ELK Products ELK-BLT Battery Backup Accessory

Battery backup with LifeTester health monitoring for ELK panels

• Battery backup tester with LifeTester predictive health monitoring
• Predicts remaining battery runtime before in-field failure
• Padded carrying case and self-adhesive test data labels included

ELK Products · ELK-P1215

ELK Products ELK-P1215 ELK Security Accessory

14VDC charger and power supply for ELK security systems

• 14VDC power supply for ELK panels and backup battery charging
• F1-Faston No. 187 receptacles for direct ELK panel connection
• Drops into ELK security system power architecture

ELK Products · ELK-P1216

ELK Products ELK-P1216 ELK Security Accessory

12VDC auxiliary power and signal distribution for ELK security systems

• 12VDC power and signal distribution accessory for ELK systems
• Drops into standard ELK access and alarm panel architectures
• Aux power supply for modular system expansion deployments

ELK Products · ELK-P1417

ELK Products ELK-P1417 ELK Security Accessory

ELK auxiliary accessory for access control and alarm expansion

• 14VDC power supply with 100-240V AC universal input
• 13.8-14 VDC regulated output for stable aux power delivery
• Compact 3.07 x 2.83 x 1.5 in (78 x 72 x 38 mm) for rack installs

ELK Products · ELK-P1426

ELK Products ELK-P1426 ELK Security Accessory

14VDC accessory for ELK security control system integration

• 14VDC supply with 100-240V AC universal input voltage range
• 13.8-14 VDC regulated output for stable control circuit operation
• Compact 3.07 x 2.83 x 1.5 in housing for rack-mount deployment

ELK Products · ELK-P212S

ELK Products ELK-P212S RS-485 Security Accessory

RS-485 expansion node for distributed ELK security systems over twisted pair

• 12VDC RS-485 serial expansion accessory for ELK security panels
• 2.0 Amp output for door strikes, readers, and aux device loads
• Drops into existing ELK access control system architecture

ELK Products · ELK-SP12F

ELK Products ELK-SP12F Security Accessory

ELK control panel expansion accessory for system reconfiguration and deployment

• Wall-mount security accessory for ELK control panel deployments
• Compact 4.81 x 3.13 x 1.44 in white housing matches interiors
• Mounting hardware included for drywall and panel installs

ELK Products · ELK-SP30

ELK Products ELK-SP30 Security System Accessory

ELK control panel bridge accessory for multi-device security deployments

• Speaker accessory for ELK alarm panels (500-7000 Hz range)
• Operates 4 to 140 degrees F for unconditioned space placement
• 6 x 8 x 9.5 in white housing for hallway or common-area mounting

ELK Products · ELK-SP35

ELK Products ELK-SP35 ELK Security Accessory

Access control credential for ELK security systems

• ELK accessory with 250-8000 Hz frequency range for system audio
• Compact 4.25 x 4.25 x 2.13 in white housing for tight wall spots
• Credential-based deployment for residential and commercial sites

ELK Products · ELK-SP40

ELK Products ELK-SP40 Security Accessory

Expands ELK security panels for residential and commercial integration

• ELK security speaker accessory with 250-8000 Hz audio range
• Operates 4 to 140 degrees F for unconditioned interior spaces
• 11 x 6.5 x 8.5 in white housing for hallway and common-area mount