Lifesafety Power

Lifesafety Power

SKU: FPO150-B100D8PM8NLCE4B

Lifesafety Power FPO150-B100D8PM8NLCE4B 150W power supply 12A/12

• 150W Class 2 power-limited supply delivers 12A @ 12V or 6A @ 24V from one enclosure.
• Eight individually fused DC auxiliary outputs (3A per fuse) protect against downstream shorts.
• Single-source design feeds access panels, readers, mag locks, and door strikes together.

Lifesafety Power

SKU: FPO150-B100C8PD8PNLCE4M1

Lifesafety Power FPO150-B100C8PD8PNLCE4M1 150W power supply 12A

• Selectable 12A/12V or 6A/24V output adapts to legacy and long-run installations.
• 8 relay lock outputs support per-output fail-safe or fail-secure mode on one board.
• Class 2 power-limited 2.5A outputs reduce arc risk and simplify mixed-load wiring.

Lifesafety Power

SKU: FPO150-B1002D8PM8NLCE6M/P8-A

Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A 150W power supply

• Delivers 12A at 12V or 6A at 24V to drive readers, strikes, and auxiliaries.
• Eight individually fused 3A auxiliary outputs isolate faults without dropping the primary bus.
• Class 2 power-limited (2.5A per auxiliary) satisfies life-safety code supervision requirements.

Lifesafety Power

SKU: FPO150-B1002D8PM8NLCE6M/T8-A

Lifesafety Power FPO150-B1002D8PM8NLCE6M/T8-A 150W power supply

• Delivers 12A at 12V or 6A at 24V to power mid-size door controllers and readers.
• Eight individually fused 3A auxiliary outputs enable per-load fault isolation and zoning.
• Class 2 power-limited 2.5A per channel removes need for external protection on each run.

Lifesafety Power

SKU: FPO150-B1002D8PM8NLCE6M/P8-A-RVN

Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A-RVN 150W power supp

• Dual-bus architecture with 8 individually fused 2.5A aux ports eliminates single-point faults.
• Primary output selectable 12V/12A or 24V/6A at install supports varied door controller loads.
• E6 enclosure with integrated Mercury back plate fits standard cabinets; DIN-rail or wall-mount ready.

Lifesafety Power

SKU: FPO150-B1002D8PM8NLCE6M

Lifesafety Power FPO150-B1002D8PM8NLCE6M 150W Dual Voltage 120

• 150W at 120VAC input supports mixed lock and reader loads from one enclosure.
• Dual 12V/24V DC selectable output eliminates the need for a separate voltage converter.
• 8 managed lock outputs keep strike and mag-lock circuits isolated from auxiliary loads.

Lifesafety Power

SKU: FPO150-2D8PE6M1

Lifesafety Power FPO150-2D8PE6M1 150W Single Voltage 120 VAC 16

• 150W at 24 VDC consolidates power for up to 16 auxiliary devices in one unit.
• Single 120 VAC input simplifies wiring in rack or cabinet deployments.
• Supports cameras, access readers, intercoms, and sensors drawing 24 VDC.

Lifesafety Power

SKU: FPO150-2D8E6M1

Lifesafety Power FPO150-2D8E6M1 150W power supply 12A/12V or 6A

• Dual-voltage primary (12V/12A or 24V/6A) adapts to cable-run length without swapping units.
• 8 independently fused 3A aux outputs prevent a single short from collapsing the entire supply.
• Per-channel Bus1/Bus2 routing isolates camera power from access-control loads on one PSU.

Lifesafety Power

SKU: FPO150/250-2D8P2M8NLCE8M2

Lifesafety Power FPO150/250-2D8P2M8NLCE8M2 150W PS 12A/12V or 6A

• Dual main rails deliver 150W or 250W at selectable 12V/24V for flexible load matching.
• Eight Class 2 auxiliary outputs at 2.5A each eliminate separate supplies for strikes and sensors.
• Fused 3A-per-output distribution module isolates faults and speeds field replacement.

Lifesafety Power

SKU: FPO150/150-C8D8PE6M

Lifesafety Power FPO150/150-C8D8PE6M 150W power supply 12A/12V

Lifesafety Power

SKU: FPO150/250-3D8P2M8PNLCE8M3/P16-A

Lifesafety Power FPO150/250-3D8P2M8PNLCE8M3/P16-A 150W power supp

• Dual-output rating (150W/12V or 250W/24V) supports legacy and modern devices from one supply.
• Eight individually managed Class 2 auxiliary outputs, each rated 2.5A, reduce field wiring complexity.
• Per-output bus selection enables functional separation of access control and camera circuits in one enclosure.

Lifesafety Power

SKU: FPO150/250-3D8P2M8NLCE8M1/P16-A

Lifesafety Power FPO150/250-3D8P2M8NLCE8M1/P16-A 150W power suppl

• Eight independently fused Class 2 outputs (3A each) isolate faults without killing the full distribution.
• Per-output bus assignment logically segregates device groups—readers vs. locks—over existing wiring.
• Managed module reports fuse status and per-output load, cutting field troubleshooting time on service calls.

Lifesafety Power

SKU: FPO150/250-3D8P2M8NLCE8M2/P16-C

Lifesafety Power FPO150/250-3D8P2M8NLCE8M2/P16-C 150W power suppl

• Jumper-selectable 12V or 24V output supports both legacy and modern access control hardware.
• Eight independently fused Class 2 outputs eliminate external relay banks in multi-load deployments.
• Dual-bus routing isolates critical door strike loads from secondary auxiliary devices per output.

Lifesafety Power

SKU: FPO150/250-3D8P2M8NLCE4M1/T16-A

Lifesafety Power FPO150/250-3D8P2M8NLCE4M1/T16-A 150W power suppl

• Dual-mode 150W/250W output matches load budgets from small reader nets to full buildings.
• Eight individually fused 3A outputs isolate faults per circuit, preventing cascading outages.
• Per-output Bus1/Bus2 routing enables logical grouping and redundant paths without rewiring.

Lifesafety Power

SKU: FPO150/250-3D8P2M8NLCE6M1/P16-A

Lifesafety Power FPO150/250-3D8P2M8NLCE6M1/P16-A 150W power suppl

• Dual 150W/250W rating lets you scale output at install without field jumpers.
• Eight individually fused 3A outputs isolate faults without tripping the main supply.
• Dual bus architecture enables load balancing across circuits in a single enclosure.

Lifesafety Power

SKU: FPO150/250-3D8P2M8NLCE8M1

Lifesafety Power FPO150/250-3D8P2M8NLCE8M1 150W power supply 12A

• Dual-rated 150W/250W output supports 12V or 24V loads across multi-door deployments.
• Eight individually fused 3A DC outputs allow per-port circuit isolation via Bus1/Bus2.
• Class 2 power-limited design meets UL life-safety requirements for access-control installs.

Lifesafety Power

SKU: FPO150/250-2M8NLC2SD16E8M2/P16-A

Lifesafety Power FPO150/250-2M8NLC2SD16E8M2/P16-A 150W power supp

• Dual-rail UPS delivers 150W standard / 250W extended for mid-sized access-control clusters.
• 8-channel MDM fuses each output at 3A, eliminating external fusing panels and wiring clutter.
• Per-channel 12V/24V assignment supports mixed locks, readers, and cameras on one supply.

Lifesafety Power

SKU: FPO150/250-2M8NLCSD16E8M3

Lifesafety Power FPO150/250-2M8NLCSD16E8M3 150W power supply 12A

• Dual-voltage output (12V/24V) supports mixed camera, lock, and reader loads from one unit.
• 8 individually fused 3A ports eliminate daisy-chained adapters and simplify fault isolation.
• Rack, wall, or DIN-rail mountable for flexible deployment in cabinets and closets.

Lifesafety Power

SKU: FPO150/250-2M8NLC2SD16E8M2/T16-A

Lifesafety Power FPO150/250-2M8NLC2SD16E8M2/T16-A 150W power supp

• Dual-output rails (150W + 250W) isolate loads so a fault won't drop the full system.
• 8 individually fused 3A channels enable per-circuit fault detection before an incident.
• DIN-rail E8 enclosure with included M8 bus cable cuts field assembly time and errors.

Lifesafety Power

SKU: FPO150/250-2M8NLC2SD16E8M3/P16-AX2

Lifesafety Power FPO150/250-2M8NLC2SD16E8M3/P16-AX2 150W power su

• Scales from 150W to 250W without hardware swap, protecting your deployment investment.
• Eight independently fused 3A channels prevent a single fault from cascading to other devices.
• Selectable 12V or 24V output supports mixed camera and access-control loads in one unit.