Lifesafety Power FPO150-B100C8D8E4V1 Access Control Power Supply
Overview
The FPO150-B100C8D8E4V1 is a 150W industrial power supply engineered for distributed access control installations running Vertx system hardware. It delivers dual-voltage outputs—4A at 12V and 4A at 24V—across eight fused lock and auxiliary device channels, all housed in an E4V1 enclosure measuring 24H × 20W × 4.5D inches. This form factor fits standard rack or wall-mounted panel deployments where you need compact, redundant power for multiple door strikes, mag locks, request-to-exit sensors, and auxiliary devices without sprawling multiple smaller supplies across the installation.
Compatibility
This supply pairs directly with Vertx access control panels and integrated security systems requiring dual-voltage, fused-channel architecture. The FPO150-B100C8D8E4V1 is designed to support mixed-voltage loads—12V devices (auxiliary sensors, signaling relays, low-current locks) alongside 24V gear (standard mag locks, solenoids, higher-current strike devices) from a single enclosure. Verify your Vertx panel's power input specifications and channel count against the eight available fused outputs before deployment.
Installation Notes
Mount the E4V1 enclosure on a secure wall surface or within a control room rack, ensuring adequate ventilation around the chassis for thermal dissipation under sustained 150W load. Route input AC power through a dedicated circuit breaker rated for the supply's input current draw. Lock and auxiliary outputs are fused individually—confirm fuse ratings match your load requirements and keep spare fuses on-site. All wiring must comply with local electrical codes and fire-alarm installation standards if the supply backs up life-safety devices.
What's in the Box
- 1x FPO150-B100C8D8E4V1 power supply with E4V1 enclosure
- AC input cord (length and connector type per manufacturer spec)
- Fused terminal blocks for lock and auxiliary outputs
