Lifesafety Power

Lifesafety Power · FPO75/150-C4PD8PE1

Lifesafety Power FPO75/150-C4PD8PE1 FPO75/150-C4PD8PE1

Redundant power supply designed for distributed security deployments where loss of primary power cannot interrupt video, access control, or alarm

• Dual independent output rails isolate loads, preventing a single fault from dropping all circuits.
• Redundant architecture supports 99.5%+ uptime deployments for NVRs, access panels, and alarms.
• Separate circuit inputs allow phase or UPS isolation, maximizing protection against power events.

Lifesafety Power · FPO75/150-C4D8E4M

Lifesafety Power FPO75/150-C4D8E4M 75W 6A/12V

Configurable power supply board that bridges facility power infrastructure to access control and alarm endpoints

• 75/150W configurable power supply for access + alarm endpoints
• 4 relay lock outputs + 8 auxiliary DC outputs (12 total)
• Selectable 12VDC or 24VDC output voltage

Lifesafety Power · FPO75/150-C4D8E2

Lifesafety Power FPO75/150-C4D8E2 75W 6A/12Vo

Configurable power supply designed to deliver supervised power to up to 4 electric locks while providing 8 independent fused auxiliary outputs for

• Dual-mode 75W/150W operation supports 12VDC or 24VDC lock loads from one unit.
• Four supervised lock outputs plus eight independent 3A-fused auxiliary circuits.
• Selectable voltage and wattage reduces SKU count across mixed-voltage deployments.

Lifesafety Power · FPO75/150-C4D8E1

Lifesafety Power FPO75/150-C4D8E1 Four Door Access Control

75W industrial power supply engineered for multi-door access control deployments requiring simultaneous 12V and 24V outputs

• Dual 12V and 24V rails power mixed-voltage locks and readers from one chassis.
• 75W budget supports four doors; single DIN-rail or wall-mount chassis cuts cabinet clutter.
• Continuous-duty passive cooling suits 24/7 access control without active fan maintenance.

Lifesafety Power · FPO75/150-C4C82D8PE8M1

Lifesafety Power FPO75/150-C4C82D8PE8M1 FPO75/150-C4C82D8PE8M1

75W redundant power supply built for security systems requiring continuous uptime and failover protection

• 75W redundant output eliminates single points of failure in camera and access control systems.
• Automatic switchover between dual AC inputs requires no manual intervention or system restart.
• Configuration code C4C82D8PE8M1 defines output voltage, terminal layout, and supervision protocol.

Lifesafety Power · FPO75/150-2D8E4M

Lifesafety Power FPO75/150-2D8E4M 225W Dual Voltage 120 VAC 16

225W dual voltage power supply designed to distribute power across distributed surveillance and access control installations

Lifesafety Power · FPO75/150-2C82D8E2

Lifesafety Power FPO75/150-2C82D8E2 75W 6A

75-watt board-mount power supply designed for distributed power architecture in IP security installations

• Board-mount form factor integrates into custom enclosures and OEM power frames.
• Dual-voltage output—12VDC @ 6A or 24VDC @ 3A—serves mixed device populations from one unit.
• Select 24V mode on long cable runs to reduce voltage drop across extended security zones.

Lifesafety Power · FPO75/75-2D8PE2

Lifesafety Power FPO75/75-2D8PE2 150W Dual Voltage

150W dual voltage power supply rated for 120 VAC input, designed to provision multiple camera circuits and auxiliary loads in small-to-medium

• 150W dual-voltage output (75W+75W) powers mixed 12V DC and 24V AC device circuits.
• 8 supervised auxiliary outputs protect individual channels by isolating shorted loads.
• Wall-mount steel enclosure accepts 120V AC input for centralized, conditioned power.

Lifesafety Power · FPO75/150-E4

Lifesafety Power FPO75/150-E4 150W Power Supply

150W power supply engineered for distributed security installations where equipment operates on either 12VDC or 24VDC

• Selectable 12VDC or 24VDC output eliminates stocking two separate supplies per site.
• Delivers 12A at 12V or 6A at 24V within a 150W budget for multi-device branches.
• No integrated battery backup; pair with external UPS where uninterruptible power is needed.

Lifesafety Power · FPO75/150-D8PM8PNLCE4S

Lifesafety Power FPO75/150-D8PM8PNLCE4S 150W

150W power supply designed for distributed access-control and security systems requiring multiple power feeds

• Delivers 150W output—12A at 12V DC—to power locks, readers, and aux devices.
• Eight Class 2 power-limited outputs at 2.5A each with per-port short-circuit protection.
• Each output independently selectable for Bus1 or Bus2, supporting dual-bus panel layouts.

Lifesafety Power · FPO75/150-C8PD8PE4S

Lifesafety Power FPO75/150-C8PD8PE4S 8DR SWH Pro 12V

225W dual-output power supply engineered specifically for 8DR SWH Pro access control systems

• 225W dual-output supply powers both 12V and 24V readers from a single unit.
• E4S enclosure (24H × 20W × 4.5D in.) fits standard 19-inch rack or wall cabinet.
• Purpose-built for 8DR SWH Pro platforms, eliminating daisy-chained power units.

Lifesafety Power · FPO75/150-2C8P2D8PE6M1

Lifesafety Power FPO75/150-2C8P2D8PE6M1 75W 6A/12V

Power supply module purpose-built for access control and security automation systems

• 16 independently configurable relay outputs eliminate external relay modules in multi-door installs.
• Selectable 12VDC/24VDC output supports locks, REX devices, and door sensors on one supply.
• E6 enclosure (30H×23W×6.5D in.) ships with Mercury back plate and door mount kit included.

Lifesafety Power · FPO75-D8E4A

Lifesafety Power FPO75-D8E4A 75W Power Supply

75W power supply board designed to centralize power distribution for small-to-medium IP camera installations and access control systems

• Dual-voltage output (12VDC/6A or 24VDC/3A) supports mixed-voltage deployments from one board.
• 75W board consolidates power distribution for small-to-medium camera and access control systems.
• Voltage is jumper-selected pre-commissioning; confirm endpoint ratings before energizing the board.

Lifesafety Power · FPO75-B100C4E1M

Lifesafety Power FPO75-B100C4E1M Power supply board 75W 6A/12V

75W redundant power supply with dual independent outputs—2A @ 12VDC and 2A @ 24VDC—designed to power access control systems, door locks, and

• Dual independent outputs (12VDC @ 2A and 24VDC @ 2A) support mixed-voltage installations.
• Four individually fused lock outputs isolate circuit faults without tripping the entire supply.
• E1M enclosure (14H×12W×4.5D in.) fits standard wall-mount or rack-install security closets.

Lifesafety Power · FPO250-F8PE1

Lifesafety Power FPO250-F8PE1 Unified Power Sys FPO250-F8PE1

250W unified power supply engineered for multi-door access control and integrated security deployments where independent output switching and

• Eight independent FAI outputs (2.5A each) eliminate relay banks for per-door mode control.
• Class 2 NEC 725 rating removes per-output circuit breaker requirements, saving closet space.
• Selectable 20A@12V or 10A@24V supports 4–8 door strikes with headroom for readers.

Lifesafety Power · FPO250/E-BOXED

Lifesafety Power FPO250/E-BOXED DC Power Supply/Charger

• Accepts 208–230VAC mains input, compatible with standard commercial electrical infrastructure.
• Fully enclosed BOXED form factor mounts to DIN rail, wall bracket, or cabinet surface.
• Integrated charging circuit supports battery backup systems alongside regulated DC output.

Lifesafety Power · FPO250-E8S

Lifesafety Power FPO250-E8S 250W Power Supply

250W power supply board engineered for security integrations where you need straightforward, reliable 12V or 24V delivery across multiple devices

• 250W board-level supply handles mid-range camera arrays without running near capacity.
• Outputs 20A at 12VDC or 10A at 24VDC, eliminating separate step-down converters.
• Mounts directly inside racks or enclosures, preserving cabinet space with no external brick.

Lifesafety Power · FPO250-E5

Lifesafety Power FPO250-E5 250W PS

250W regulated DC power supply designed for mid-sized surveillance and access control installations requiring centralized 12V or 24V distribution

• Selectable 12V/24V output eliminates separate supplies for mixed camera and access control loads.
• 250W continuous rating supports 15–30 endpoints at 24/7 duty cycle without voltage dropout.
• Compact 8.5"×11"×3" E5 enclosure mounts wall or DIN-rail in standard equipment cabinets.

Lifesafety Power · FPO250-E4M

Lifesafety Power FPO250-E4M 250W Power Supply

250-watt regulated power supply designed to distribute DC power across distributed security endpoints in medium-scale installations

• Delivers 20A @ 12VDC or 10A @ 24VDC from a single 250W regulated supply.
• Eight relay outputs enable remote circuit supervision and switchable load control.
• AC 110–240V universal input simplifies deployment across global facility standards.

Lifesafety Power · FPO250-E2

Lifesafety Power FPO250-E2 Unified Power Sys 250W 120 VAC

Single-voltage unified power supply designed for access control and electronic lock systems requiring integrated UL-listed backup power and emergency

• 250W output on 120V AC drives multiple locks, readers, and control devices from one unit.
• Integrated fire alarm disconnect auto-unlocks doors on alarm signal—no external relay needed.
• Dual Form C fault contacts report AC and system faults to BAS or NVR for real-time alerts.