Lifesafety Power products
-
Save $191.01
Add to Cart The item has been addedLifesafety Power RBE-BOXED 12VDC 8A
Rackmount battery enclosure designed to consolidate backup power capacity for distributed security and life-safety systems
- Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
- Independent per-slot management allows battery replacement without taking the system offline.
- 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.
Usually Ships in 2-3 Weeks Free shipping over $499$557.00 $365.99 Save $191.01 -
Save $18.01
Add to Cart The item has been addedLifesafety Power RB8-BOXED 8A Aux Relay DPDT Auto VLTG
N auxiliary relay module designed for access control, door strike, and solenoid lock circuits where isolated relay switching is required downstream
- DPDT contacts provide two independent 8A switching paths for dual-circuit control.
- Auto voltage sensing (12V/24VDC) eliminates jumper config and reduces field wiring errors.
- Isolated relay contacts protect control panel electronics from load-side transients.
Usually Ships in 2-3 Weeks Free shipping over $499$54.00 $35.99 Save $18.01 -
Save $39.01
Add to Cart The item has been addedLifesafety Power R8-BOXED Lock output module 8 outputs
Dedicated auxiliary lock output module designed to expand electromagnetic lock and door strike control in multi-door access control systems
- Eight individually fused 12VDC/3A outputs isolate faults so one shorted lock can't take down adjacent doors.
- Per-output failsafe/fail-secure jumper selection lets you match egress or security requirements door by door.
- FAI supervision detects open circuits, shorts, and supply faults and propagates alerts to the host panel instantly.
Usually Ships in 2-3 Weeks Free shipping over $499$114.00 $74.99 Save $39.01 -
Save $0.01
Add to Cart The item has been addedLifesafety Power POWER-CORD-C13-6FEET-BOXED Power Cord
6-foot IEC C13 power cord designed for power supply systems in surveillance and security installations
- 6-foot IEC C13 cord covers standard rack-to-PDU distances without extensions.
- C13 female connector mates directly with C14 male inlets on PDUs and UPS units.
- Boxed packaging supports spare inventory management in multi-rack deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$13.00 $12.99 Save $0.01 -
Save $33.01
Add to Cart The item has been addedLifesafety Power Nxb-Boxed Flexpower Nlc Nxb
Boxed enclosure configuration of the Flexpower platform, engineered as a modular power distribution node for networked security and access control
- Supervised output channels report brownout, overcurrent, and breaker faults in real time.
- Dual-input architecture supports AC mains failover, preventing cascading endpoint loss.
- Boxed enclosure includes cable routing and terminal blocks for organized, modular wiring.
Usually Ships in 2-3 Weeks Free shipping over $499$98.00 $64.99 Save $33.01 -
Save $44.01
Add to Cart The item has been addedLifesafety Power NPE130-BOXED 0W Single Voltage PoE
PoE-input power supply designed for access control and life safety system backup power
- PoE input eliminates dedicated AC runs to remote access control cabinets.
- Selectable 12V or 24V output reduces nuisance lock dropout on power transients.
- Form C fire alarm contact auto-unlocks doors to meet life safety egress code.
Usually Ships in 2-3 Weeks Free shipping over $499$130.00 $85.99 Save $44.01 -
Save $115.01
Add to Cart The item has been addedLifesafety Power Nlc-Boxed Nlc-Boxed Quick Guide Nlc
Compact power supply enclosure designed to house and protect electrical components in security infrastructure deployments
- Standard enclosure form factor enables consistent multi-site mounting with predictable footprints.
- Shields power supply electronics from dust and physical contact, extending operational life.
- Multiple knockout points simplify I/O cable routing without custom drilling or field modification.
Usually Ships in 2-3 Weeks Free shipping over $499$336.00 $220.99 Save $115.01 -
Save $383.01
Add to Cart The item has been addedLifesafety Power K1E4-Door-Boxed K1E4-Door-Boxed
Power supply unit designed to support door control and access management in security installations
- Operates at 24VDC to match standard electrified lock and reader voltage requirements.
- Centralizes door power distribution, reducing wiring complexity in multi-door deployments.
- Dedicated supply isolates door control power from the access panel for cleaner fault isolation.
Usually Ships in 2-3 Weeks Free shipping over $499$1,118.00 $734.99 Save $383.01 -
Save $0.01
Add to Cart The item has been addedLifesafety Power HINGE-STANDOFF-KIT Hinging Standoff Kit
Mounting accessory bundle designed to simplify camera installation on surfaces requiring both fixed and articulated standoff support
- Includes 4 hinging and 4 fixed standoffs, covering both adjustable and fixed mounts.
- All hardware is sized for 6-32 fasteners, matching common camera housings and brackets.
- Mixed standoff set reduces separate hardware orders during commissioning or servicing.
Usually Ships in 2-3 Weeks Free shipping over $499$33.00 $32.99 Save $0.01 -
Save $498.01
Add to Cart The item has been addedLifesafety Power HAC-8R-BOXED ATS Power Distribution
1U rack-mounted AC power distribution unit designed for surveillance and access-control deployments where cabinet space and outlet consolidation are
- 1U rack profile fits standard 19-inch EIA racks, preserving vertical cabinet space.
- Consolidates multiple AC outlets into organized banks, reducing branch-circuit clutter.
- Ships with rack ears and fasteners for tool-free installation—no adapter brackets needed.
Usually Ships in 2-3 Weeks Free shipping over $499$1,452.00 $953.99 Save $498.01 -
Save $127.01
Add to Cart The item has been addedLifesafety Power FPV6-E1 FPV6-E1
Supervised power distribution module designed for access control and security system installations where supervised output circuits are required
- Supervised outputs detect open circuits, shorts, and power faults per zone.
- Designed for DIN rail or panel-mount integration in commercial security builds.
- Supports multi-zone power distribution for access control and alarm systems.
Usually Ships in 2-3 Weeks Free shipping over $499$372.00 $244.99 Save $127.01 -
Save $138.01
Add to Cart The item has been addedLifesafety Power FPV6-D8E1 6A 8 Auxillary Outputs
6-ampere regulated power supply designed to centralize backup power distribution across multi-device security installations
- 6A regulated output prevents voltage droop when camera resets and door strikes overlap.
- 8 independently supervised outputs let you isolate faults per device without system-wide impact.
- Battery backup integration enables graceful degradation so access control stays active during outages.
Usually Ships in 2-3 Weeks Free shipping over $499$403.00 $264.99 Save $138.01 -
Save $92.01
Add to Cart The item has been addedLifesafety Power FPV6-BOXED 6 Amps
Compact, switchable 6-amp power supply for mid-scale surveillance deployments
- Switchable 12VDC/24VDC output supports legacy cameras, readers, and sensors in one unit.
- 6A max output delivers up to 72W, powering multiple endpoints without a PoE switch.
- Boxed enclosure mounts in standard cabinets — no DIN rail required for retrofit installs.
Usually Ships in 2-3 Weeks Free shipping over $499$271.00 $178.99 Save $92.01 -
Save $142.01
Add to Cart The item has been addedLifesafety Power FPV6-B100E1 4A/12V 4A/24V
Compact power distribution module designed for modest-scale IP security deployments where you need simultaneous 12VDC and 24VDC rails—common in
- Dual-rail 12 VDC and 24 VDC outputs at 4 A each eliminate a second power supply.
- 48 W on 12 V and 96 W on 24 V rails support cameras, readers, and door strikes.
- Compact wall-mount form factor suits single-door and small-system access deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$416.00 $273.99 Save $142.01 -
Save $101.01
Add to Cart The item has been addedLifesafety Power FPV4-E1 4A Ps/Enclosure
4-ampere power supply enclosure engineered for centralized power distribution in IP camera and access control deployments
- 4A continuous output supports small-to-mid-scale IP camera or access control loads.
- 24VAC input aligns with standard security infrastructure transformers and panels.
- Single-enclosure distribution reduces wiring overhead and simplifies fault isolation.
Usually Ships in 2-3 Weeks Free shipping over $499$296.00 $194.99 Save $101.01 -
Save $113.01
Add to Cart The item has been addedLifesafety Power FPV4-D8E1 4A 8 Auxillary Outputs
4-amp distributed power supply designed to centralize power management for mid-sized security systems where single-supply capacity falls short
- 8 independent outputs distribute 4A across circuits, eliminating single-point failure risk.
- Factory-selectable 12VDC or 24VDC output avoids field reconfiguration at install time.
- Remote supervision monitors voltage and load status for early fault detection off-site.
Usually Ships in 2-3 Weeks Free shipping over $499$330.00 $216.99 Save $113.01 -
Save $139.01
Add to Cart The item has been addedLifesafety Power FPV4-B100E1 2A/12V 2A/24V
Compact 2-ampere power supply delivering selectable 12VDC or 24VDC output, purpose-built for small-to-medium IP security camera deployments and
- Switchable 12V/24V output eliminates stocking separate PSUs for mixed-voltage jobs.
- 2A per output supports 2–4 compact dome cameras on a single 12V branch.
- Compact form factor fits shallow wall-mount or DIN rail enclosures with constrained space.
Usually Ships in 2-3 Weeks Free shipping over $499$406.00 $266.99 Save $139.01 -
Save $188.01
Add to Cart The item has been addedLifesafety Power FPV104-R8E1 10A/24V 8 Lock Outputs
Regulated 24VDC power supply rated for 10A continuous output, designed to serve multiple electromagnetic lock circuits in access control and security
- Regulated 24VDC at 10A continuous output powers up to 8 electromagnetic lock circuits.
- Eight individual outputs consolidate mid-scale door control wiring into a single supply.
- Sized for 4–8 door deployments; calculate per-lock draw to stay within 10A total.
Usually Ships in 2-3 Weeks Free shipping over $499$549.00 $360.99 Save $188.01 -
Save $146.01
Add to Cart The item has been addedLifesafety Power FPV104-E1 10A/24V Ps/ Enclosure
10-ampere, 24-volt regulated power supply housed in a wall- or rack-mount enclosure
- Delivers regulated 24VDC at 10A to support mid-sized camera and reader arrays.
- Wall- or rack-mount enclosure centralizes DC distribution, eliminating per-device wall-warts.
- Terminal blocks accept 18–14 AWG copper wiring for standard low-voltage field connections.
Usually Ships in 2-3 Weeks Free shipping over $499$426.00 $279.99 Save $146.01 -
Save $156.01
Add to Cart The item has been addedLifesafety Power FPV104-D8E1 10A/24V 8 Auxillary Outputs
10-amp 24VDC regulated power supply with 8 separately supervised auxiliary outputs, designed for integrators deploying access control, intrusion
- 10A at 24VDC regulated output powers multiple readers, strikes, and sensors from one source.
- 8 independently supervised auxiliary outputs enable per-circuit fault detection and isolation.
- Cabinet-mount design centralizes distributed 24VDC power for access control and intrusion panels.
Usually Ships in 2-3 Weeks Free shipping over $499$456.00 $299.99 Save $156.01