Intercom & Paging
Intercom and paging systems support visitor entry, internal communication, and facility-wide announcements. Choose the right stations, accessories, mounts, and paging components for reliable commercial deployments.
Plan Your Deployment
- Entry points and call flow requirements
- Indoor vs outdoor station placement and protection
- Mounting, back boxes, and cable routing considerations
- Network and power requirements (PoE vs local power)
- Audio coverage needs for paging zones
Sub categories
Showing Results for Intercom & Paging
-
Comelit
SKU: VVDS-IP
Comelit VVDS-IP Ez-Pack A/V Vandalcom Digital Keypad
Vandal-resistant 2MP digital keypad for Comelit IP access control
- 2MP resolution with A/V interface for multi-tenant commercial systems
- Rack-mount design integrates into distributed Comelit IP architectures
- Vandal-resistant housing rated for indoor commercial environments
Special Order · Ships in 2-3 weeks$3,766.99 $3,602.99 Save $164.00The item has been added -
ELK Products
SKU: ELK-M120
ELK Products ELK-M120 50W Mixer Amplifier
50W mixer amplifier for ELK audio systems and multi-zone distribution
- 50W output at 8VDC with integrated mixing for multi-zone audio routing
- Compact 3.25" diameter design fits tight installation spaces in control cabinets
- Direct compatibility with ELK Products control panels and security system audio
Special Order · Ships in 2-3 weeks$19.99The item has been added -
ELK Products
SKU: ELK-M1TWS
ELK Products ELK-M1TWS Two Way Speaker Microphone
Two-way speaker microphone for ELK M1 security panels
- Built-in microphone with speaker for two-way voice communication
- Integrates directly with ELK M1 series control panels
- Suited for residential and light commercial security installations
Special Order · Ships in 2-3 weeks$30.99The item has been added -
Geovision
SKU: GV-PA191
Geovision GV-PA191 PoE Adapter IEEE 802.3af
IEEE 802.3af PoE adapter for Geovision & ONVIF cameras
- Supplies power over Ethernet to IP cameras up to 328 ft via CAT5
- Works with Geovision IP surveillance systems and ONVIF-compliant devices
- Eliminates separate power supplies in network-based camera installations
Special Order · Ships in 2-3 weeks$30.99The item has been added -
Geovision
SKU: GV-PA191-55
Geovision GV-PA191 PoE Power Adapter
802.3af PoE adapter for Geovision cameras and ONVIF devices indoors
- Supplies up to 19W via standard RJ45 PoE injection for IP cameras
- Works with Geovision systems and ONVIF-compliant devices over CAT5
- Centralized power delivery up to 328 ft (100 m) from hub to camera
Special Order · Ships in 2-3 weeks$30.99The item has been added -
Geovision
SKU: GV-PA903BT
Geovision GV-PA903BT Gigabit PoE Injector
Gigabit PoE injector for IP cameras over existing CAT5e/CAT6
- 802.3af PoE (15.4W max) powers cameras without separate AC runs
- 1000 Mbps Gigabit throughput maintains full video bandwidth
- Plug-and-play operation—no config or management required
Special Order · Ships in 2-3 weeks$123.99 $121.99 Save $2.00The item has been added -
Geovision
SKU: GV-PA903BT-140
Geovision GV-PA903BT Pole Mount Adapter
Pole mount adapter with PoE power for Geovision camera systems
- PoE powered up to 95W—no separate power supply needed for outdoor poles
- Supports CAT5e/6 cable runs up to 328 ft from adapter to camera
- White housing rated for 0–40°C outdoor operating temperatures
Special Order · Ships in 2-3 weeks$123.99The item has been added -
Hanwha
SKU: F2XX-PM
Hanwha F2XX-PM Pole Mount
304L stainless steel pole mount for F200 Series cameras in marine environments
- 304L stainless steel construction rated for marine and offshore corrosion exposure
- Pole mount design compatible with TNO-X6073EPT1-Z, TNO-X6323EPT1-Z, TNO-P9073EPT1-Z
- Lightweight at 8.5 lb with compact 19.5 x 4.1 x 9.0 inch footprint for easy install
Special Order · Ships in 2-3 weeks$1,010.00 $677.99 Save $332.01The item has been added -
Hanwha
SKU: F2XX-WM
Hanwha F2XX-WM Wall Mount for F200 Series
304L stainless steel wall mount for Hanwha F200 series cameras
- Adjustable positioning allows flexible angle optimization without bracket swap
- 304L stainless steel resists salt spray and chemical environments
- Fail-safe mounting geometry for secure, reliable installation
Special Order · Ships in 2-3 weeks$1,010.00 $677.99 Save $332.01The item has been added -
Hanwha
SKU: NOC-RIMP
Hanwha NOC-RIMP Wall Mounting Bracket
Wall bracket for NOP-RI2MS cameras in triple-gang electrical boxes
- Metal construction with precision standoffs for secure positioning
- Fits standard triple-gang electrical boxes, 5.5" × 3.63" × 0.5"
- Operates from -40°C to +80°C in code-compliant installations
Special Order · Ships in 2-3 weeks$75.99The item has been added -
Hanwha
SKU: SBC-165W
Hanwha SBC-165W White Door Cover for TID-600R
White polycarbonate door cover for TID-600R intercom with weather & impact protection
- Precision-fit design for TID-600R video intercom installations
- Polycarbonate construction resists weathering, dust, and impact damage
- Clean white finish integrates with modern and traditional building aesthetics
Special Order · Ships in 2-3 weeks$22.99The item has been added -
Hanwha
SKU: SBD-110GPA
Hanwha SBD-110GPA Installation Kit for Mobile Cameras
Mount kit for Hanwha 5MP mobile IR cameras with M12 adapter
- Aluminum mount plate with white finish fits wall or ceiling install
- M12 to RJ45 adapter converts camera connector to standard network jack
- Works with TNV-C8014RM and TNV-C8034RM 5MP mobile IR flat cameras
Special Order · Ships in 2-3 weeks$80.00 $53.99 Save $26.01The item has been added -
Hanwha
SKU: SBD-150GP
Hanwha SBD-150GP Adapter Plate for 4-Inch Octagon
150mm aluminum adapter plate for 4-inch octagon junction boxes
- Mounts to 4-inch octagon and square junction boxes with TR20 screw
- 10mm aluminum construction with white powder coat finish, weighs 120g
- Compatible with QNV and ANV Hanwha dome camera models
Special Order · Ships in 2-3 weeks$30.99The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBS-165B
Hanwha SBS-165B Surface Mount Back Box for TID-600R
Surface mount back box for TID-600R intercom with M25 conduit
- Aluminum housing with dark grey finish resists corrosion in lobbies
- M25 conduit opening routes power and network cables safely through walls
- Mounts directly to drywall, tile, or concrete—no cavity prep needed
In stock · Ships same business day$49.99The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBS-165TM
Hanwha SBS-165TM Tilt Mount for TID-600R
Adjustable tilt mount for TID-600R intercom with polycarbonate durability
- Tilt mechanism positions intercom at optimal angle for any entry point
- Polycarbonate construction resists impact and UV degradation outdoors
- Compact 35g mount operates -30°C to +55°C in 0–100% humidity environments
In stock · Ships same business day$31.99The item has been added -
Hanwha
SKU: SBU-500PM
Hanwha SBU-500PM Stainless Steel Pole Mount
Stainless steel pole mount for Hanwha positioning and thermal cameras
- SUS304 stainless steel construction resists corrosion in outdoor deployments
- 15 kg load capacity supports stable positioning and thermal camera mounting
- Compact 200×250×70 mm footprint installs on poles with minimal footprint
Special Order · Ships in 2-3 weeks$667.00 $447.99 Save $219.01The item has been added