Switch Modules
Showing Results for Switch Modules
-
Add to Cart The item has been addedTP-Link
SKU: SM5110-LR
TP-Link SM5110-LR Omada 10Gbase-LR SFP+ LC Transceiver
- 10GBase-LR SFP+ LC transceiver — 10 km single-mode reach
- 1310 nm wavelength for long-distance inter-switch trunks
- IEEE 802.3ae compliant 10 Gbps full-duplex throughput
$25.99The item has been added -
Add to Cart The item has been addedTP-Link
SKU: SM5310-T
TP-Link SM5310-T Omada 10GBASE-T RJ45 SFP+ Module
- 10GBase-T RJ45 SFP+ module — 30 m on Cat6a copper
- Auto-negotiates 10G, 5G, 2.5G, 1G, and 100 Mbps clients
- Adds copper 10G to fiber-only managed switches
$45.99The item has been added -
Add to Cart The item has been addedTP-Link
SKU: SM6110-LR
TP-Link SM6110-LR Omada 25GBase-LR SFP28 LC Transceiver
- 25GBase-LR SFP28 LC transceiver — 10 km single-mode reach
- Dual-rate 25.78 Gbps and 10.31 Gbps for migration paths
- 1310 nm on 9/125 um single-mode fiber backbone runs
$60.99The item has been added -
TP-Link
SKU: SM6110-SR
TP-Link SM6110-SR Omada 25GBase-SR SFP28 LC Transceiver
- 25GBase-SR SFP28 LC transceiver — 100 m on OM4 multimode
- Dual-rate 25.78 and 10.31 Gbps for 10G migration support
- Digital diagnostic monitoring on each transceiver module
$40.99The item has been added -
Add to Cart The item has been addedTP-Link
SKU: TL-SM5110-SR
TP-Link TL-SM5110-SR 10GBase-SR SFP+ LC Transceiver
- 10GBase-SR SFP+ LC transceiver — 300 m on OM3 multimode
- 33 m reach on OM1 and OM2 62.5/125 um multimode fiber
- 850 nm wavelength for 10 Gbps short-reach links
$21.99 $20.99 Save $1.00The item has been added -
Transition Networks
SKU: DAC-10G-SFP-01M
Transition Networks DAC-10G-SFP-01M 10G Sfp+ Copper Dac Cable
1-meter passive copper DAC cable for 10G SFP+ switching
- Passive copper design requires no active power or signal conditioning at the port.
- Supports 10GbE, 1GbE, FC 8G/10G, and FCoE 10G over a single 1-meter twinax run.
- UL 94 V-O flammability rating meets safety requirements for enclosed rack environments.
$80.64 $79.99 Save $0.65The item has been added -
Transition Networks
SKU: DAC-10G-SFP-05M
Transition Networks DAC-10G-SFP-05M 10G Sfp+ Copper Dac Cable
10 Gbps SFP+ copper DAC cable, 0.5m for data center switches
- Delivers 10.3125 Gbps throughput over copper for low-latency SFP+ port interconnects.
- Passive 0.5m design requires no optical components, reducing power draw and cost.
- Rated 0–70°C operating range suits enclosed rack and data center switch deployments.
$144.00 $143.99 Save $0.01The item has been added -
Transition Networks
SKU: E-100BTX-FX-06(SFP)-NA
Transition Networks E-100BTX-FX-06(SFP)-NA 100Base-TX Sfp Module
100 Mbps fiber-to-copper SFP module for extended network reach
- Hot-swappable SFP form factor lets you replace modules without switch downtime.
- Converts single-mode fiber to RJ-45 copper at 100 Mbps for extended backbone runs.
- Lifetime warranty and included power supply reduce long-term deployment risk.
$224.00 $167.99 Save $56.01The item has been added -
Transition Networks
SKU: ION001-A-NA
Transition Networks ION001-A-NA 1-Slot ION Chassis
1-slot modular chassis with 24x 10G single-mode fiber ports for field deployments
- 24 single-mode fiber ports run full 10G line rate, supporting long campus runs.
- DIN rail mount fits control cabinets and pole enclosures without a rack chassis.
- Unmanaged operation requires zero configuration — connect fiber, apply power, done.
$104.00 $81.99 Save $22.01The item has been added -
Transition Networks
SKU: ION106-A
Transition Networks ION106-A 6-Slot ION Chassis
6-slot rack-mount chassis for mixed ION Series modules
- Holds up to 6 ION Series modules, enabling custom mixed-media configurations in one chassis.
- Integrated AC power supply included, supporting immediate rack-mount deployment in standard 19" racks.
- TAA compliant design suits government and enterprise procurement requirements.
$688.00 $592.99 Save $95.01The item has been added -
Transition Networks
SKU: ION106-A-NA
Transition Networks ION106-A-NA 6-Slot Modular Chassis
6-slot 10G fiber chassis for unmanaged backbone networks
- Six swappable line card slots let you match exact port counts and fiber types per site.
- Supports up to 24 single-mode fiber ports at 10 Gbps for high-density camera backbones.
- Unmanaged design with rack and DIN rail mounting cuts provisioning time in any control room.
$748.00 $567.99 Save $180.01The item has been added -
Add to Cart The item has been addedTransition Networks
SKU: ION106-AAB-NA
Transition Networks ION106-AAB-NA 6-Slot AC Modular Chassis
6-slot modular AC chassis for scalable ION network deployments
- Holds up to 6 ION modules, letting you add interfaces or capacity without replacing the chassis.
- AC mains power simplifies rack deployment in network closets and control rooms.
- Managed operation with ION ecosystem compatibility supports mixed line-card configurations.
$1,159.00 $874.99 Save $284.01The item has been added -
Transition Networks
SKU: ION106-AAMB-NA
Transition Networks ION106-AAMB-NA 6-Slot Managed Industrial
6-slot managed chassis with 10G ports for industrial deployments
- 6 SFP slots and 8 ports at 10G handle high-density surveillance backhaul without bottlenecks.
- Modular chassis lets you populate slots incrementally, avoiding forklift upgrades as capacity grows.
- SNMP management integrates with Nagios, Zabbix, or SolarWinds — no proprietary licensing required.
$1,685.00 $1,256.99 Save $428.01The item has been added -
Add to Cart The item has been addedTransition Networks
SKU: ION106-D
Transition Networks ION106-D 6-Slot Managed Industrial Switch
6-slot modular managed switch, up to 32 ports @ 10G for industrial
- 6-slot modular chassis accepts mixed fiber/copper ION modules for flexible builds.
- Supports up to 32 ports at 10G over multi-mode fiber for high-density deployments.
- DIN rail mount and industrial temp rating simplify installs in harsh field enclosures.
$891.00 $668.99 Save $222.01The item has been added -
Transition Networks
SKU: ION219-A-NA
Transition Networks ION219-A-NA 19-Slot Rack Chassis
19-slot modular chassis with 24x 10G single-mode fiber for distributed networks
- 24-port 10G single-mode fiber chassis scales distributed sites without overpaying for unused capacity.
- Unmanaged wire-speed forwarding eliminates firmware patches and reduces mean-time-to-deploy.
- Rack-mount and DIN rail support enables flexible installation in cabinets or wall-mount enclosures.
$1,499.00 $635.99 Save $863.01The item has been added -
Transition Networks
SKU: ION219-AAMB-NA
Transition Networks ION219-AAMB-NA 19-Slot AC Ion Chassis
19-slot AC chassis for modular ION network deployments
- 19 modular slots accept any ION family line card, enabling field-reconfigurable roles.
- Universal 100–240 VAC input supports global and multi-site deployments without power adapters.
- Standard 19-inch rack mount fits existing telecom closets, reducing installation complexity.
$1,822.00 $1,360.99 Save $461.01The item has been added
Switch Modules
Switch modules expand network switch capability by adding uplink options, fiber connectivity, and modular expansion ports. Select compatible SFP transceivers and switch modules to match your switch hardware, fiber type, and distance requirements.
Plan Your Deployment
- Switch model compatibility and supported module types
- Fiber type selection (single-mode vs multi-mode)
- Distance requirements and transceiver range
- Uplink speed requirements (1G, 10G, etc.)
- Network design and redundancy planning
Switch Modules — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 196 working models of switch modules sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Connectivity | Wired |
| Type | Switch, Accessory, Media Converter, Power Supply, 4x T1/E1 ION Module, PoE Injector, 6 Slot AC ION Chassis, 19-Slot AC ION Chassis |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.