NETGEAR

SKU: XSM4316S-100NES

NETGEAR XSM4316S-100NES M4300-8X8F Managed Switch

• 96 Gigabit ports reduce daisy-chaining in high-density camera deployments.
• 100G uplink throughput prevents backbone bottlenecks across all 96 edge ports.
• PoE++ (802.3bt) delivers up to 95W per port, eliminating separate PSUs for PTZ cameras.

NETGEAR

SKU: XSM4324-100NES

NETGEAR XSM4324-100NES M4350-12X12F Managed Switch

• 96 ports at 100G deliver 9.6 Tbps non-blocking fabric for dense camera deployments.
• PoE++ (802.3bt) supplies up to 95W per port, eliminating separate midspan injectors.
• CLI, Web GUI, and SNMP management enable VLAN segmentation and traffic prioritization.

NETGEAR

SKU: XSM4328CV-100NES

NETGEAR XSM4328CV-100NES M4350-24X4V Managed Switch

• 96-port 100G fabric delivers full line-rate switching with no oversubscription under sustained load.
• PoE++ (802.3bt) on all ports supplies up to 90W each for high-draw PTZ cameras and IR devices.
• Web GUI, CLI, and SNMP management enable VLAN, QoS, and integration with any monitoring platform.

NETGEAR

SKU: XSM4328FV-100NES

NETGEAR XSM4328FV-100NES M4350-24F4V Managed Switch

• 96 × 10G ports deliver up to 960 Gbps aggregate to handle 50+ simultaneous camera streams.
• PoE++ (802.3bt) eliminates external injectors by powering high-draw devices at up to 95W per port.
• Fully managed with VLAN and QoS support to isolate camera traffic and prioritize NVR recording.

NETGEAR

SKU: XSM4340FV-TAANES

NETGEAR XSM4340FV-TAANES PoE Network Switch

• 45 ports at 10G line rate eliminate bottlenecks when aggregating high-density camera feeds.
• Single-mode fiber support extends reach across geographically dispersed campus or facility links.
• TAA-compliant managed switch with VLAN and SNMP support meets government procurement requirements.

NETGEAR

SKU: XSM4340V-100NES

NETGEAR XSM4340V-100NES PoE Network Switch

• 24 x 10G ports eliminate backbone congestion when aggregating high-density 4K camera feeds.
• Single-mode fiber SFP+ uplinks extend surveillance links across buildings without signal loss.
• Full management via CLI, Web GUI, and SNMP enables VLAN isolation and QoS per port.

NETGEAR

SKU: XSM4344C-100NES

NETGEAR XSM4344C-100NES PoE Network Switch

• 96 ports at 10G each eliminate uplink bottlenecks in high-density switch fabrics.
• CLI, Web GUI, and SNMP management support VLANs and QoS across complex deployments.
• PoE++ (802.3bt) per-port power delivery supports high-draw cameras and access control.

NETGEAR

SKU: XSM4344FC-100NES

NETGEAR XSM4344FC-100NES M4350-40F4C Managed Switch

• 96 ports at 10G line rate deliver 960 Gbps aggregate throughput without oversubscription.
• PoE++ (802.3bt) supplies up to 90W per port, eliminating external injectors for high-draw cameras.
• 802.1Q VLAN segmentation isolates camera, NVR, and office traffic on one managed fabric.

NETGEAR

SKU: XSM4396K1-100NES

NETGEAR XSM4396K1-100NES M4300-96X Managed Switch

• 96-port 10 Gigabit managed switch for enterprise data centers
• 480W PoE budget across SFP+ ports
• Layer 2/3 managed switching with stacking capability

Optex

SKU: AP-360BR(C)

Optex AP-360BR(C) 360-Degree Ceiling-Mount PIR Detector

360° ceiling PIR detector, battery-powered, recessed mount

• 360-degree omnidirectional PIR motion coverage from one ceiling unit
• Battery-operated at 200 mA - no hardwired power pull to ceiling
• Compact 52 x 42.5 mm ceiling-mount housing for discreet install

Optex

SKU: AX-100TFRI

Optex AX-100TFRI Outdoor Photoelectric Beam Detector

Battery-powered outdoor beam detector, 200 ft range, IP65 rated

• 200ft (60m) active infrared beam detector for outdoor perimeters
• Battery-powered with 4 SAFT LSH20 lithium cells - no AC pull
• Operates -13 to 140 degrees F for year-round outdoor exposure

Optex

SKU: AX-130TN

Optex AX-130TN Outdoor Photoelectric Beam Detector 20m (70ft.) 4-Beam

4-beam outdoor detector with 20m range and IP65 rating

• Outdoor 4-beam photoelectric detector with 20m (70ft) range
• 4 independent channels for layered perimeter zone coverage
• 38 mA draw at standard alarm panel voltage - low aux power impact

Optex

SKU: AX-200TFRI

Optex AX-200TFRI Outdoor Photoelectric Beam Detector

Outdoor perimeter beam detector with 200ft range and IP65 rating

• 200ft active infrared beam detector with IP65 outdoor housing
• Operates -13 to 140 degrees F for year-round outdoor exposure
• Standalone perimeter zone protects fence lines and rooftop edges

Optex

SKU: AX-200TN

Optex AX-200TN Outdoor Photoelectric Beam Detector 20m (70ft.)

Outdoor thermal motion detector, 20m range, IP65 rated

• Outdoor PIR motion sensor with dual-element pyroelectric design
• Two-element filtering rejects sun and temperature swing false alarms
• Hardwired install for stable outdoor perimeter motion coverage

Optex

SKU: AX-70TN

Optex AX-70TN Outdoor Photoelectric Beam Detector 20m (70ft.) 4-Beam

4-beam outdoor perimeter detector with 20m range and IP65 rating

• Outdoor 4-beam photoelectric detector with 20m (70ft) range
• Selectable frequency reduces crosstalk on side-by-side installs
• 38 mA draw at standard alarm panel voltage - low aux power impact

Optex

SKU: BXS-AM(W)

Optex BXS-AM(W) Outdoor Boundary Guard PIR Detector

Outdoor PIR boundary detector, 31 mA, compact 4×20 mm form factor

• Outdoor PIR boundary guard - 31 mA draw fits standard alarm power budgets
• Compact 4 x 20 mm form factor for discreet exterior placement
• Drops into perimeter zones for fence-line and property-edge coverage