Pelco SRXP4-5V29-EBT-IR vs Pelco SRXV2-2V13-EBT-IRWL: Specification Comparison
Both the Pelco SRXP4-5V29-EBT-IR (Sarix Pro 4) and the SRXV2-2V13-EBT-IRWL (Sarix Value 2) are 2MP outdoor bullet cameras sharing the same 1/2.8" CMOS sensor format and PoE Class 3 power, making them direct cross-shop candidates for installers evaluating Pelco's lineup. The comparison spans imaging capability, environmental ruggedness, and VMS/analytics integration — three dimensions where the two series diverge meaningfully despite sharing resolution and form factor.
In This Guide
How do the imaging specs compare?
Both cameras resolve 1920×1080 on a 1/2.8" progressive-scan CMOS sensor, but the Sarix Pro 4 (SRXP4-5V29-EBT-IR) outpaces the Value 2 in several imaging parameters. The Pro 4 delivers up to 60 fps versus the Value 2's 30 fps ceiling — a meaningful delta for fast-moving targets or forensic playback. WDR is rated at 130 dB SureVision on the Pro 4 against 120 dB on the Value 2, a 10 dB advantage that translates to better performance in high-contrast scenes such as entry/exit points with backlit doorways. Minimum color illumination is 0.01 lux on the Pro 4 versus 0.02 lux on the Value 2; both reach 0 lux with IR active.
Lens coverage also differs. The Pro 4 carries a 4.4–9.3 mm motorized varifocal (HFOV 32–109°), while the Value 2 offers a wider 2.7–13.5 mm varifocal range with remote zoom, autofocus, and IR cut filter control — giving the Value 2 greater reach at the long end. The Value 2 also adds white-light illumination alongside its 850 nm IR, enabling full-color nighttime capture. The Pro 4 provides IR-only night vision (850 nm). Aperture is F1.4 on both models.
The Value 2 supports Motion JPEG as a third compression codec in addition to H.265 and H.264; the Pro 4 lists H.264, H.265, and Smart Compression but does not list Motion JPEG in the provided specs.
What about installation and environment?
Both cameras are rated IP66 for weather resistance. The Pro 4 specifies IK09 vandal resistance; the Value 2 spec sheet lists IK09 in the product attributes but IK10 in the impact rating field — a discrepancy in the provided data that installers should verify against the published datasheet before specifying. Both are designated for outdoor use with a white housing. Power is PoE Class 3 (802.3af) on both units, simplifying infrastructure planning.
Operating temperature is a differentiator: the Value 2 is rated −40 °C to +60 °C, suitable for harsh cold-climate deployments. The Pro 4's operating temperature range is not explicitly stated in the provided specifications beyond a storage temperature reference of −10 °C to +70 °C, so cold-climate suitability cannot be confirmed from available data. Mount options differ as well — the Pro 4 supports wall, ceiling, and pendant; the Value 2 adds pole and corner mounting. The Value 2 also carries NDAA Section 889 compliance; no such approval is listed for the Pro 4 in the provided specs.
Which fits your VMS and analytics better?
ONVIF compliance is broader on the Pro 4, which supports Profile S, Profile T, Profile G, and Profile M. The Value 2 is certified for Profile S and Profile T only — Profile G (recording) and Profile M (metadata/analytics) are absent from the provided specs, which may affect interoperability with VMS platforms that leverage those profiles for edge recording or metadata ingestion.
On-board analytics are exclusive to the Pro 4: its Smart Analytics suite covers Person/Vehicle Detection, Directional Violation, Loitering, Beam Crossing, Crowd Detection, and Tamper Alert. The Value 2 lists no equivalent edge analytics in the provided specifications. Both cameras support microSD edge storage and HTTPS encryption. Audio support is noted for the Pro 4 (microphone supported); no audio capability is listed for the Value 2 in the provided specs. The Pro 4 carries 1 GB RAM / 512 MB Flash; the Value 2 has 512 MB RAM / 256 MB Flash, relevant for analytics processing headroom.
Which should you choose: the SRXP4-5V29-EBT-IR or the SRXV2-2V13-EBT-IRWL?
Our take: The SRXP4-5V29-EBT-IR is the stronger choice when edge analytics, higher frame rates, and broader ONVIF profile support are priorities. Concretely: it delivers 60 fps versus 30 fps on the Value 2, a 130 dB WDR rating versus 120 dB, and adds ONVIF Profile G and Profile M alongside a full Smart Analytics suite — none of which are present in the Value 2's provided specs. The SRXV2-2V13-EBT-IRWL is the better fit when cold-climate operation (rated to −40 °C versus an unspecified range for the Pro 4), NDAA Section 889 compliance, a longer varifocal reach (2.7–13.5 mm), white-light color night vision, or pole/corner mounting are required. Buyers should verify the Value 2's IK09 vs IK10 discrepancy and the Pro 4's cold-temperature rating directly against Pelco's published datasheets before finalizing the specification.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Pelco SRXP4-5V29-EBT-IR | Pelco SRXV2-2V13-EBT-IRWL |
|---|---|---|
| Series | Sarix Professional 4 | Sarix Value 2 |
| Resolution | 2MP (1920×1080) | 2MP (1920×1080) |
| Image Sensor | 1/2.8" Progressive Scan CMOS | 1/2.8" Progressive Scan CMOS |
| Aperture | F1.4 | F1.4 |
| Lens / Focal Length | 4.4–9.3 mm motorized varifocal | 2.7–13.5 mm varifocal |
| HFOV | 32–109° | Not specified in provided specs |
| Max Frame Rate | 60 fps | 30 fps |
| Min Illumination (Color / IR) | 0.01 lux / 0 lux | 0.02 lux / 0 lux |
| IR / Illumination | 850 nm IR | 850 nm IR + White Light |
| WDR | 130 dB SureVision | 120 dB |
| Video Compression | H.265; H.264; Smart Compression | H.265; H.264; Motion JPEG |
| ONVIF Profiles | Profile S, T, G, M | Profile S, T |
| Edge Analytics | Person/Vehicle, Loitering, Beam Crossing, Crowd, Tamper, Directional | Not listed in provided specs |
| IP Rating | IP66 | IP66 |
| Vandal / Impact Rating | IK09 | IK09 (attr) / IK10 (impact field) — verify with datasheet |
| Operating Temperature | Not specified in provided specs | −40 °C to +60 °C |
| Power / PoE Class | PoE Class 3 (802.3af) | PoE Class 3 (802.3af) |
| Mount Types | Wall; Ceiling; Pendant | Wall; Ceiling; Pole; Pendant; Corner |
| Audio | Microphone supported | Not listed in provided specs |
| Edge Storage | microSD | microSD |
| HTTPS Encryption | Yes | Yes |
| On-board Memory | 1 GB RAM / 512 MB Flash | 512 MB RAM / 256 MB Flash |
| NDAA Section 889 | Not listed in provided specs | Compliant |
| Warranty | 5-year | 5-year |
Frequently Asked Questions
Which should you choose: the SRXP4-5V29-EBT-IR or the SRXV2-2V13-EBT-IRWL?
The SRXP4-5V29-EBT-IR is the stronger choice when edge analytics, higher frame rates, and broader ONVIF profile support are priorities. Concretely: it delivers 60 fps versus 30 fps on the Value 2, a 130 dB WDR rating versus 120 dB, and adds ONVIF Profile G and Profile M alongside a full Smart Analytics suite — none of which are present in the Value 2's provided specs. The SRXV2-2V13-EBT-IRWL is the better fit when cold-climate operation (rated to −40 °C versus an unspecified range for the Pro 4), NDAA Section 889 compliance, a longer varifocal reach (2.7–13.5 mm), white-light color night vision, or pole/corner mounting are required. Buyers should verify the Value 2's IK09 vs IK10 discrepancy and the Pro 4's cold-temperature rating directly against Pelco's published datasheets before finalizing the specification.
Is the SRXP4-5V29-EBT-IR or SRXV2-2V13-EBT-IRWL better for low-light performance?
Both cameras reach 0 lux with IR illumination active. In color mode, the Pro 4 (SRXP4-5V29-EBT-IR) has a slight edge at 0.01 lux versus 0.02 lux for the Value 2. However, the Value 2 (SRXV2-2V13-EBT-IRWL) adds white-light illumination alongside 850 nm IR, enabling full-color nighttime images when color identification is needed. The Pro 4 provides IR-only night operation per the provided specs.
Does the SRXV2-2V13-EBT-IRWL support edge analytics like the SRXP4-5V29-EBT-IR?
No. The provided specifications for the SRXV2-2V13-EBT-IRWL do not list any edge analytics capabilities. The SRXP4-5V29-EBT-IR includes Smart Analytics covering Person/Vehicle Detection, Directional Violation, Loitering, Beam Crossing, Crowd Detection, and Tamper Alert. If on-camera analytics are required, the Pro 4 is the only option between these two models based on the available specs.
Which camera is better suited for federal or government projects requiring NDAA compliance?
The SRXV2-2V13-EBT-IRWL explicitly lists NDAA Section 889 compliance in its provided specifications. The SRXP4-5V29-EBT-IR does not include an NDAA compliance statement in the provided specs. Installers working on federally funded projects or those requiring Section 889 compliance should specify the Value 2 or confirm the Pro 4's status directly with Pelco.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.