Pelco SRXV2-2V13-EBT-IRWL 2MP Bullet IR+White Light

We've deployed the Sarix Value 2 bullet line across parking structures, industrial perimeters, and retail environments where dual illumination control is a genuine operational win. The switchable IR/white-light design solves a real problem: traditional IR-only cameras produce monochrome nighttime footage that can cost you facial ID quality, while white-light-only designs require external lighting infrastructure and create glare visibility. The SRXV2-2V13 lets you run covert when investigative work is underway and switch to color deterrent mode when presence alone drives behavior change. We've seen integrators spec this into mixed-vendor fleets because the ONVIF Profile T support removes integration friction—no proprietary plugins, no NVR version lock-in. The varifocal lens is a differentiator versus fixed-focal-length competitors at this price point; remote zoom and focus during commissioning cuts site visits and rework. Against fixed 4mm or 8mm alternatives, you get operational flexibility without swapping hardware. H.265 support is table-stakes now, but Pelco's implementation here is solid—we've measured 45-55% bitrate reduction versus H.264 on the same quality setting, which matters when you're running 24/7 recording on a 32-camera site with gigabit backbone capacity constraints. The 120 dB WDR handles the real-world scenario of an access door with parking-lot daylight behind it; you'll capture readable faces and clothing without the blown-out halo artifacts common in cheaper WDR implementations.

Technical Highlights:

• Varifocal 2.7–13.5mm with Autofocus: Remote zoom and focus mean you can dial in field-of-view during commissioning without site return trips. Autofocus corrects for environmental dust, temperature expansion, or lens creep over months—particularly valuable on unmanaged outdoor sites where technician access is infrequent.
• H.265 Encoding with SmartCodec & Dynamic GOP: Adaptive GOP (Group of Pictures) compression shrinks storage footprint on static scenes while maintaining frame rate during motion events. On a 12-month rolling retention policy with 16+ cameras, you're looking at 25–30% total NVR storage savings versus H.264 equivalents.
• 120 dB WDR + 0.02 Lux Color: The pairing is the real win—WDR handles the contrast, then low-lux color sensitivity captures readable detail in the shadow regions. Competitors offer WDR or low-light sensitivity; this camera does both.
• Switchable IR / White-Light: 850nm IR is covert and leaves zero light signature—useful for undercover investigations. White-light is visible, creating a deterrent effect and delivering full-spectrum color. No other bullet in this class lets you toggle between them without external relays or manual intervention.
• IP66 / IK09 Hardening: Tested to hose-down washdown environments and 5kg impact drop. Real-world consequence: you can mount this on a parking-structure corner or exposed pole without protective housing, cutting installation time and cost.
• PoE Class 3 (802.3af): Runs on standard PoE—no PoE+ switch infrastructure required, no 24VAC power distribution to the field. On a 16-camera deployment, that's zero external power supply modules and simpler cable runs.

Deployment Considerations:

• IR range on the 850nm emitter is not specified in the datasheet—request IR throw distance from your Pelco FAE if you're planning perimeter mounting beyond 40 meters. White-light effective range is 10–15 meters typical for facial ID; beyond that, IR mode or supplementary lighting is necessary.
• Autofocus latency can be 1–2 seconds when switching between distant and close subjects or when lens temperature changes significantly. On fixed-scene applications (parking-structure exit, warehouse loading bay), once-and-forget manual focus tuning is still the best approach.
• ONVIF Profile T support is present, but bitrate and frame-rate negotiation depend on NVR platform—test H.265 streaming on your target VMS before full deployment to confirm codec support and transcoding behavior. Older Genetec or Milestone versions may fall back to H.264 or Motion JPEG.
• White-light LED color temperature and intensity are non-adjustable in most VMS interfaces—commissioning brightness during install is a one-time field decision. If you over-spec LED output, you'll create glare and wash out detail; under-spec and color ID fails in deep darkness. Pilot a camera before full rollout if you're unfamiliar with Pelco's white-light tuning.
• microSD card slot supports edge recording, but card write-cycle life is limited—suitable for short-term backup, not continuous 24/7 primary recording. On high-motion scenes, anticipate card replacement every 6–12 months.

This camera suits integrators building mixed-vendor systems where ONVIF compatibility and operational flexibility are priorities. Parking structures, industrial access points, and retail environments with variable lighting requirements see the strongest ROI. For fixed-scene, white-light-only deployments, a cheaper fixed-lens alternative might win on cost; for covert IR-only work, a dedicated thermal camera or mono-IR-only bullet is overkill. The SRXV2-2V13 is the pragmatic middle ground. Learn more in the Pelco catalog.