Hanwha XRN-3220B2 vs Kantech ADVER30R5H3G: Specification Comparison
Both the Hanwha XRN-3220B2 and the Kantech VideoEdge ADVER30R5H3G are 32-channel network video recorders in rackmount form factors targeting enterprise and mid-to-large surveillance deployments. The XRN-3220B2 is a purpose-built IP NVR with 8K resolution support and 48TB raw storage, while the ADVER30R5H3G is a hybrid unit supporting both analog and IP cameras with 30TB RAID-configured storage. A buyer evaluating either is likely sizing a multi-site or campus-scale installation and must weigh resolution ceiling, storage architecture, hybrid analog support, and VMS ecosystem fit.
In This Guide
- Which NVR delivers more recording capacity, channel density, and throughput for a 32-channel deployment?
- How do the two units compare in physical build, power requirements, and operating environment?
- Which unit offers broader integration, VMS compatibility, and management ecosystem support?
- Which should you choose: the XRN-3220B2 or the ADVER30R5H3G?
- Side-by-Side Specs
- FAQ
Which NVR delivers more recording capacity, channel density, and throughput for a 32-channel deployment?
The XRN-3220B2 records 32 IP channels simultaneously at up to 32 MP per channel with a recording bandwidth of 520 Mbps (distributed mode) and 300 Mbps in normal mode. Playback bandwidth is rated at 200 Mbps supporting multi-user simultaneous access. Storage is 48TB raw across eight SATA 3.5-inch HDD bays, expandable to a maximum of 80TB total.
The ADVER30R5H3G is specified as a hybrid unit supporting 32 analog channels plus IP expansion channels, though the exact IP channel ceiling and per-channel resolution ceiling are not stated in the provided specifications beyond a listed maximum resolution of VGA (640×480) for the analog side. Storage is 30TB in a RAID configuration; the specific RAID level is not specified. Recording and playback bandwidth figures are not provided for this model.
On raw measurable capacity, the XRN-3220B2 leads: 48TB vs. 30TB storage, 520 Mbps vs. unspecified bandwidth, and a documented 32 MP resolution ceiling vs. VGA on the analog side of the ADVER30R5H3G. Buyers needing high-resolution IP-only recording at scale will find the Hanwha unit's figures better documented and substantially higher.
How do the two units compare in physical build, power requirements, and operating environment?
The XRN-3220B2 is a 1U-class appliance (17.24 × 3.39 × 17.12 inches) constructed of metal with a black finish, weighing 7.3 kg (16.1 lb) excluding HDDs. It operates on embedded Linux and is rated for 0°C to +40°C. Power supply specifications are not listed in the provided data. The unit carries NDAA compliance and TPM 2.0 certification.
The ADVER30R5H3G is a 3U rackmount unit (19.02 × 5.12 × 24.02 inches; alternatively stated as 48.3 × 13 × 61 cm), weighing 25 lb. It is powered by a 400W supply accepting 100–240VAC. Its operating system is VideoEdge OS built on openSUSE Linux. Operating temperature range and certifications such as NDAA compliance are not specified in the provided data.
The Kantech unit is physically larger (3U vs. 1U-class), heavier (25 lb vs. 16.1 lb without HDDs), and its power requirements are explicitly documented at 400W with wide-range AC input. The Hanwha unit's power draw is not stated. The Hanwha unit explicitly carries NDAA and TPM 2.0 compliance; equivalent certifications are absent from the Kantech specifications provided.
Which unit offers broader integration, VMS compatibility, and management ecosystem support?
The XRN-3220B2 supports ONVIF, SUNAPI, and P2P protocols with a Web UI 2.0 interface. It is compatible with Wisenet Viewer and Wisenet Mobile client applications. Video compression includes H.265 with WiseStream optimization, H.264, and MJPEG. Analytics on-board include defocus detection, audio detection, dynamic event, and user-defined event. The unit operates on embedded Linux and integrates a 12th-generation Intel processor.
The ADVER30R5H3G supports RS-232 and IP/Ethernet communication and runs VideoEdge OS on openSUSE Linux. Compression is listed as H.265 and H.264. The product type metadata includes 'Controller' and 'Biometric Reader Type,' which may indicate integration with Kantech access control systems, though explicit VMS compatibility partners, ONVIF conformance profile, and analytics capabilities are not stated in the provided specifications.
The Hanwha unit provides a more fully documented integration profile: named protocols (ONVIF, SUNAPI), named client apps, and listed analytics functions. The Kantech unit's broader ecosystem value likely lies in Johnson Controls / Kantech access-control integration, but this is not confirmed by the provided spec data. Buyers standardized on Wisenet or requiring ONVIF-documented interoperability have a clearer specification basis with the XRN-3220B2.
Which should you choose: the XRN-3220B2 or the ADVER30R5H3G?
Our take: The XRN-3220B2 is the stronger choice when the deployment is IP-camera-only, demands high-resolution recording up to 32 MP, and requires documented cybersecurity compliance. Key spec deltas: the Hanwha unit provides 48TB raw storage vs. 30TB on the Kantech; its recording bandwidth is explicitly rated at 520 Mbps vs. unspecified on the ADVER30R5H3G; and it carries documented NDAA and TPM 2.0 compliance while equivalent certifications are absent from the Kantech spec sheet provided. The ADVER30R5H3G is the appropriate consideration when a site retains legacy analog cameras alongside IP cameras and the deployment is aligned with the Kantech/Johnson Controls access-control ecosystem — its hybrid analog-plus-IP architecture is a capability the XRN-3220B2 does not offer. Buyers should request a full VideoEdge datasheet to confirm ONVIF profile, per-channel IP resolution ceiling, RAID level, and operating temperature before finalizing a hybrid-site decision.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha XRN-3220B2 | Kantech ADVER30R5H3G |
|---|---|---|
| Product Type | IP NVR | Hybrid NVR (Analog + IP) |
| Max Channels | 32 IP | 32 analog + IP expansion (IP ceiling not specified) |
| Max Resolution | 32 MP | VGA (640×480) stated for analog; IP ceiling not specified |
| Recording Bandwidth | 520 Mbps (distributed) / 300 Mbps (normal) | Not specified |
| Playback Bandwidth | 200 Mbps multi-user | Not specified |
| Storage (Raw) | 48TB (8× SATA 3.5" HDD) | 30TB RAID-configured |
| Max Storage | 80TB | Not specified |
| Video Compression | H.265, H.264, MJPEG (WiseStream) | H.265, H.264 |
| Operating System | Embedded Linux | VideoEdge OS (openSUSE Linux) |
| Form Factor | Appliance / Rack-mount (~1U-class) | 3U Rackmount |
| Dimensions (W×H×D in.) | 17.24 × 3.39 × 17.12 | 19.02 × 5.12 × 24.02 |
| Weight | 7.3 kg / 16.1 lb (excl. HDD) | 25 lb |
| Power Supply | Not specified | 400W, 100–240VAC |
| Operating Temp | 0°C to +40°C | Not specified |
| ONVIF | Yes | Not specified |
| NDAA Compliant | Yes | Not specified |
| Cybersecurity | TPM 2.0, Embedded Linux | Not specified |
| Analytics | Defocus, Audio, Dynamic Event, User Event | Not specified |
| Audio I/O | G.711, G.726, AAC (16/48 kHz); 32 inputs (Kantech) | 32 audio inputs |
| VMS / Client Apps | ONVIF, SUNAPI, Wisenet Viewer, Wisenet Mobile | VideoEdge OS; RS-232, IP/Ethernet integration |
| Warranty | 5 years | Not specified |
Frequently Asked Questions
Which should you choose: the XRN-3220B2 or the ADVER30R5H3G?
The XRN-3220B2 is the stronger choice when the deployment is IP-camera-only, demands high-resolution recording up to 32 MP, and requires documented cybersecurity compliance. Key spec deltas: the Hanwha unit provides 48TB raw storage vs. 30TB on the Kantech; its recording bandwidth is explicitly rated at 520 Mbps vs. unspecified on the ADVER30R5H3G; and it carries documented NDAA and TPM 2.0 compliance while equivalent certifications are absent from the Kantech spec sheet provided. The ADVER30R5H3G is the appropriate consideration when a site retains legacy analog cameras alongside IP cameras and the deployment is aligned with the Kantech/Johnson Controls access-control ecosystem — its hybrid analog-plus-IP architecture is a capability the XRN-3220B2 does not offer. Buyers should request a full VideoEdge datasheet to confirm ONVIF profile, per-channel IP resolution ceiling, RAID level, and operating temperature before finalizing a hybrid-site decision.
Is the XRN-3220B2 or ADVER30R5H3G better for larger deployments with high-resolution IP cameras?
The XRN-3220B2 is better documented for high-resolution IP deployments: it records 32 channels simultaneously at up to 32 MP with 520 Mbps bandwidth and 48TB of expandable storage. The ADVER30R5H3G's per-channel IP resolution ceiling and bandwidth figures are not specified in the available data, making a direct comparison difficult for pure IP high-resolution use cases.
Can either NVR work with our existing analog cameras?
The ADVER30R5H3G is explicitly specified as a hybrid unit supporting 32 analog channels in addition to IP expansion, making it suited for sites retaining analog infrastructure. The XRN-3220B2 is an IP NVR; analog camera support is not listed in its specifications.
Which unit is NDAA-compliant and suitable for government or regulated installations?
The XRN-3220B2 is explicitly listed as NDAA-compliant and includes TPM 2.0. The ADVER30R5H3G's provided specifications do not state NDAA compliance or equivalent cybersecurity certifications. Buyers with federal or regulated-sector requirements should confirm NDAA status with Kantech directly before specifying the ADVER30R5H3G.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.