Geovision AVD270W-0010 vs Geovision TBL2703-0F10: Specification Comparison
Both the Geovision AVD270W-0010 and the Geovision TBL2703-0F10 are 2MP H.265 IP bullet cameras powered by PoE, aimed at outdoor and perimeter deployments where IR night vision is required. This comparison examines how their specified imaging capabilities, environmental ratings, installation flexibility, and VMS integration stack up for installers and IT buyers choosing between a fully-documented varifocal perimeter unit and a low-lux-optimized fixed bullet with a lighter published spec set.
In This Guide
How do the imaging specs compare?
The AVD270W-0010 is documented with a 1/2.8" sensor, a varifocal 2.8–12mm lens (covering approximately 108° down to 30° field of view), a maximum frame rate of 30 fps, WDR, IR Day/Night operation, and H.265 compression. The TBL2703-0F10 shares the 2MP resolution, WDR, IR, and H.265 compression, but its sensor size, lens focal length, IR range, and minimum illumination are not provided in the available specifications.
For installers, the AVD270W-0010's varifocal lens is a concrete, documented advantage: adjusting coverage on-site without swapping optics is a meaningful operational benefit. The TBL2703-0F10 is positioned as a 'Low Lux' camera, suggesting optimized low-light performance, but no minimum illumination figure, sensor size, or IR distance is supplied in the specifications to quantify that claim. Both models list WDR, but depth of WDR (in dB) is absent for both.
What about installation and environment?
The AVD270W-0010 carries IP67 and IK10 ratings, confirming protection against temporary water immersion and resistance to 20-joule mechanical impacts—appropriate for perimeter and vandal-risk locations. Its operating temperature range is specified at -40°C to 60°C, covering extreme cold and heat. It draws under 13W on 802.3af PoE and supports wall, ceiling, pole, pendant, corner, and rack mounting. Physical dimensions are Φ120 × 334 mm and weight is 0.74 kg (1.63 lb).
The TBL2703-0F10 lists PoE power and Ethernet connectivity, and its cable category is IPCAM, consistent with a standard IP bullet. However, its IP ingress rating, IK impact rating, operating temperature range, PoE class or wattage, physical dimensions, and weight are all absent from the provided specifications. Installers cannot confirm its environmental suitability from these specs alone.
Which fits your VMS and analytics better?
The AVD270W-0010 is explicitly listed as ONVIF-compatible, making it integrable with any ONVIF-conformant IP-based VMS. No edge analytics, audio input/output, or on-board storage specifications are provided for it.
The TBL2703-0F10 does not have ONVIF compatibility, edge analytics, audio, or on-board storage noted in the available specifications. Buyers requiring confirmed VMS interoperability should verify TBL2703-0F10 compatibility directly with their VMS vendor, as the spec sheet does not document it.
Which should you choose: the AVD270W-0010 or the TBL2703-0F10?
Our take: The AVD270W-0010 is the stronger documented choice when environmental ruggedness, installation flexibility, and verified VMS compatibility are priorities. Three concrete spec deltas support this: first, the AVD270W-0010 holds confirmed IP67 and IK10 ratings and a -40°C to 60°C operating range, while the TBL2703-0F10 lists none of these; second, the AVD270W-0010 provides a varifocal 2.8–12mm lens with six mount options, whereas the TBL2703-0F10 supplies no lens or mounting data; third, the AVD270W-0010 is explicitly ONVIF-compatible, while the TBL2703-0F10 makes no such claim. The TBL2703-0F10's 'Low Lux' positioning may indicate superior low-light sensitivity, but no sensor or illumination numbers are available to confirm this. Buyers with exposure to vandalism, extreme temperatures, or specific ONVIF VMS platforms should select the AVD270W-0010 based on current specs. Evaluate the TBL2703-0F10 only after obtaining its full datasheet.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision AVD270W-0010 | Geovision TBL2703-0F10 |
|---|---|---|
| Resolution | 2 MP (1080p) | 2 MP |
| Image Sensor Size | 1/2.8" | — |
| Lens / Focal Length | Varifocal 2.8–12mm | — |
| Field of View | 108° – 30° (varifocal range) | — |
| IR / Night Vision | IR; Day/Night | IR |
| WDR | WDR | WDR |
| Max Frame Rate | 30 fps | — |
| Video Compression | H.265 | H.265 |
| IP Rating | IP67 | — |
| IK / Impact Rating | IK10 | — |
| Operating Temperature | -40°C to 60°C | — |
| Power Input / PoE Class | PoE 802.3af (<13W) | PoE (class not specified) |
| Mount Types | Wall; Ceiling; Pole; Pendant; Corner; Rack | — |
| ONVIF Compatibility | ONVIF-compatible | — |
| Dimensions | Φ120 × 334 mm (Φ4.72" × 13.15") | — |
| Weight | 0.74 kg (1.63 lb) | — |
Frequently Asked Questions
Which should you choose: the AVD270W-0010 or the TBL2703-0F10?
The AVD270W-0010 is the stronger documented choice when environmental ruggedness, installation flexibility, and verified VMS compatibility are priorities. Three concrete spec deltas support this: first, the AVD270W-0010 holds confirmed IP67 and IK10 ratings and a -40°C to 60°C operating range, while the TBL2703-0F10 lists none of these; second, the AVD270W-0010 provides a varifocal 2.8–12mm lens with six mount options, whereas the TBL2703-0F10 supplies no lens or mounting data; third, the AVD270W-0010 is explicitly ONVIF-compatible, while the TBL2703-0F10 makes no such claim. The TBL2703-0F10's 'Low Lux' positioning may indicate superior low-light sensitivity, but no sensor or illumination numbers are available to confirm this. Buyers with exposure to vandalism, extreme temperatures, or specific ONVIF VMS platforms should select the AVD270W-0010 based on current specs. Evaluate the TBL2703-0F10 only after obtaining its full datasheet.
Is the AVD270W-0010 or TBL2703-0F10 better for low light?
The TBL2703-0F10 is marketed as a 'Low Lux' IR bullet, suggesting it is optimized for low-light environments, but no minimum illumination figure, sensor size, or IR distance is specified. The AVD270W-0010 lists IR Day/Night and a 1/2.8" sensor but also lacks a published minimum illumination value. Neither camera can be definitively ranked for low-light performance on the basis of the provided specifications alone.
Which camera is better suited for outdoor perimeter use?
The AVD270W-0010 has documented IP67 (dust-tight, water-immersion resistant), IK10 (20-joule impact resistant), and a -40°C to 60°C operating range—all relevant to exposed perimeter deployments. The TBL2703-0F10 does not list an IP rating, IK rating, or temperature range in the available specs, making it impossible to confirm outdoor-perimeter suitability from spec data alone.
Will either camera work with my existing ONVIF VMS?
The AVD270W-0010 is explicitly listed as ONVIF-compatible with IP-based VMS platforms. The TBL2703-0F10 does not include an ONVIF compatibility claim in its published specifications. Buyers with ONVIF-dependent VMS environments should confirm TBL2703-0F10 compatibility directly with Geovision or their VMS vendor before purchasing.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.