CyberPower OR500LCDRM1U vs Vertiv GXT5-500LVRT2UXL: Specification Comparison
Both the CyberPower OR500LCDRM1U and Vertiv GXT5-500LVRT2UXL are 500VA rackmount UPS units sharing the same outlet configuration (6 × NEMA 5-15R), 120V input, and identical operating temperature range — making them genuine cross-shop candidates for installers protecting edge switches, NVRs, access-control panels, or small server loads in 1U–2U rack space. The comparison turns on topology (line-interactive vs. online double-conversion), power density, management depth, and the premium a buyer is willing to pay for zero-transfer-time protection and hot-swap batteries.
In This Guide
What UPS topology and runtime protection does each unit provide?
The CyberPower OR500LCDRM1U uses a line-interactive topology. Its specs do not state a transfer time to battery, output waveform, or runtime figures at any load percentage. Battery capacity is fixed at two 6V/7Ah sealed lead-acid cells. The input acceptance window is 90–140 VAC, and output regulation is ±10%, providing moderate protection against sags and surges before switching to battery.
The Vertiv GXT5-500LVRT2UXL uses online double-conversion topology with zero transfer time, meaning protected equipment never experiences a switchover event — the inverter supplies load continuously. Output is pure sinewave regulated to ±3%. The specs cite 15–18 minutes runtime at 50% load and 8–10 minutes at 80% load. Input acceptance is 60–150 VAC — a 90-volt wider window than the CyberPower — allowing it to ride through a far broader range of utility disturbances without touching the battery. Battery cells are hot-swappable, permitting replacement without a maintenance window.
How do VA/W capacity, rack footprint, and physical build compare?
Both units share a 500VA nameplate. The CyberPower is rated at 300W output power and occupies 1U (17.05 × 1.75 × 9.25 in, 18 lb). The Vertiv is rated at 500W output power — a 67% higher watt-to-VA ratio — in a 2U chassis (3.5 × 17 × 16 in, approximately 28 lb) that converts between rack and tower orientation. The Vertiv's higher watt rating matters when loads have low power-factor peripherals; the CyberPower's 300W cap can be reached before the VA limit is hit on resistive-heavy loads.
The CyberPower's 1U footprint conserves rack space, which is relevant in dense security head-end racks. The Vertiv's 2U footprint is the cost of the online double-conversion transformer and hot-swap battery tray. Weight differential (18 lb vs. ~28 lb) affects shelf-rail load calculations in lightweight two-post racks.
Which unit offers stronger remote management and integration options?
The CyberPower OR500LCDRM1U specs list no connectivity ports, no management software compatibility, no SNMP card slot, and no display type. The datasheet reference (/content/product-datasheets/OR500LCDRM1U.pdf) is the sole pointer to further detail; absent that, management capabilities are not confirmed by the provided specifications.
The Vertiv GXT5-500LVRT2UXL specifies USB, RS485, and RS232 ports on-board, plus an optional RDU101 network card slot for SNMP/network management. It includes a color LCD displaying real-time load, runtime, voltage, and battery health. The unit is confirmed compatible with Vertiv PowerAlert software, VMware, Windows Server, and Linux shutdown daemons. Efficiency is specified at greater than 92% at 50% load (Energy Star 2.0). Audible noise is specified at less than 45 dBA at 1 meter — a figure absent from the CyberPower spec set.
Which should you choose: the OR500LCDRM1U or the GXT5-500LVRT2UXL?
Our take: The GXT5-500LVRT2UXL is the stronger choice when load sensitivity, runtime visibility, and remote manageability are primary requirements. Its online double-conversion topology eliminates transfer time entirely versus an unspecified transfer gap on the OR500LCDRM1U; its output regulation is ±3% versus ±10%; and its watt rating is 500W versus 300W — meaning it can sustain a heavier resistive load before reaching its VA ceiling. Hot-swap batteries allow service without downtime, and onboard USB/RS485/RS232 plus an optional SNMP card slot enable full integration with hypervisors and NMS platforms. The OR500LCDRM1U is the rational pick for cost-sensitive, space-constrained deployments where a 1U footprint is mandatory, transfer-time tolerance exists, and no remote management is required — such as a small branch-office NVR or a secondary PoE switch circuit carrying non-critical cameras.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | CyberPower OR500LCDRM1U | Vertiv GXT5-500LVRT2UXL |
|---|---|---|
| Product Type | UPS (Line-Interactive) | UPS (Online Double-Conversion) |
| Capacity (VA) | 500VA | 500VA |
| Capacity (Watts) | 300W | 500W |
| Topology | Line-Interactive | Online Double-Conversion |
| Transfer Time | Not specified | Zero (continuous online) |
| Output Waveform | Not specified | Pure Sinewave |
| Output Voltage Regulation | ±10% | ±3% |
| Input Voltage Range | 90–140 VAC | 60–150 VAC |
| Input Frequency | Not specified | 50/60 Hz auto-sensing |
| Outlets | 6 × NEMA 5-15R | 6 × NEMA 5-15R (4 programmable, 2 non-programmable) |
| Battery Type | Sealed Lead-Acid (2 × 6V/7Ah) | Hot-Swappable VRLA |
| Runtime at 50% Load | Not specified | 15–18 minutes |
| Runtime at 80% Load | Not specified | 8–10 minutes |
| Form Factor / Rack Height | 1U Rackmount | 2U Rack/Tower Convertible |
| Dimensions (W × H × D) | 17.05 × 1.75 × 9.25 in | 17 × 3.5 × 16 in |
| Weight | 18 lb | ~28 lb |
| Connectivity Ports | Not specified | USB, RS485, RS232, optional SNMP card slot |
| Display | Not specified | Color LCD (load, runtime, voltage, battery health) |
| Efficiency | Not specified | >92% at 50% load |
| Audible Noise | Not specified | <45 dBA at 1 meter |
| Operating Temperature | 32–104°F (0–40°C) | 32–104°F (0–40°C) |
| Management Software | Not specified | PowerAlert, VMware, Windows Server, Linux daemons |
| Certifications | UL1778, cUL 107.1, FCC DOC Class B, Energy Star, RoHS | UL 1778 4th ed., CSA 22.2 No. 107.1, Energy Star 2.0, WEEE, RoHS2, REACH |
| Warranty | 3-Year Limited | 3-Year Advanced Replacement (next-business-day, UPS and battery) |
Frequently Asked Questions
Which should you choose: the OR500LCDRM1U or the GXT5-500LVRT2UXL?
The GXT5-500LVRT2UXL is the stronger choice when load sensitivity, runtime visibility, and remote manageability are primary requirements. Its online double-conversion topology eliminates transfer time entirely versus an unspecified transfer gap on the OR500LCDRM1U; its output regulation is ±3% versus ±10%; and its watt rating is 500W versus 300W — meaning it can sustain a heavier resistive load before reaching its VA ceiling. Hot-swap batteries allow service without downtime, and onboard USB/RS485/RS232 plus an optional SNMP card slot enable full integration with hypervisors and NMS platforms. The OR500LCDRM1U is the rational pick for cost-sensitive, space-constrained deployments where a 1U footprint is mandatory, transfer-time tolerance exists, and no remote management is required — such as a small branch-office NVR or a secondary PoE switch circuit carrying non-critical cameras.
Does either UPS protect sensitive NVR or server equipment from all power anomalies without a switchover gap?
Only the Vertiv GXT5-500LVRT2UXL provides zero transfer time through its online double-conversion design — the inverter supplies the load continuously, so equipment never experiences a power gap. The CyberPower OR500LCDRM1U uses a line-interactive design; its specs do not state a transfer time, so a brief switchover window is expected during a utility failure. For NVRs or servers that are sensitive to even sub-millisecond interruptions, the Vertiv is the specified choice.
Can I replace the batteries without powering down the connected equipment?
Yes, but only on the Vertiv GXT5-500LVRT2UXL, whose specs explicitly state hot-swappable sealed lead-acid (VRLA) batteries. The CyberPower OR500LCDRM1U specs describe its batteries as sealed lead-acid (2 × 6V/7Ah) but do not indicate hot-swap capability, so a maintenance window should be assumed.
Which UPS integrates with a network management system or virtualization platform?
The Vertiv GXT5-500LVRT2UXL specifies onboard USB, RS485, and RS232 ports plus an optional RDU101 SNMP network card slot, with confirmed compatibility for PowerAlert, VMware, Windows Server, and Linux shutdown daemons. The CyberPower OR500LCDRM1U's provided specifications list no connectivity ports and no management software compatibility, so network or hypervisor integration cannot be confirmed from the available spec data.
More UPS Comparisons
- Vertiv GXT5-500LVRT2UXL vs APC by Schneider Electric SUA500PDR-H
- Vertiv GXT5-500LVRT2UXL vs APC by Schneider Electric BE500G3
- Vertiv GXT5-500LVRT2UXL vs APC by Schneider Electric SCL500RM1UC
- Vertiv GXT5-500LVRT2UXL vs APC by Schneider Electric SCL500RMI1UC
- APC by Schneider Electric SUA500PDR-H vs Middle Atlantic S500R
- APC by Schneider Electric SUA500PDR-H vs APC by Schneider Electric BE500G3
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.