Pole Mounts & Brackets for IP Cameras

Plan Your Deployment

Pole diameter and mounting compatibility
Wind load and structural stability considerations
Outdoor environmental durability requirements
Cable routing and weatherproofing needs
Service access and future upgrade planning

Showing Results for Pole Mounts & Brackets

Compare

Add to Cart The item has been added
Axis

SKU: 01472-001

Axis TX30 Steel Straps 570mm 1 Pair - 01472-001

Steel straps for Axis cameras on poles, 570mm with corrosion resist
- Steel construction resists bending; 570mm length fits 1.5–3.5" poles
- One pair (2 straps) enables dual-point mounting to minimize camera sway
- Corrosion-resistant finish rated for indoor and outdoor deployments
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PM

Hikvision PM Pole Mount Adapter, White

Aluminum pole mount adapter for IP cameras, 2–4" poles, 14.3 lbs capacity
- Aluminum die-cast construction with stainless steel clasps resists corrosion in outdoor environments
- Supports up to 14.3 lbs—suitable for fixed and varifocal cameras with housings
- White finish mounts discreetly on poles and building surfaces without high visibility
In stock · Ships same business day

$41.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302PM

Hanwha SBP-302PM Pole Mount for Bullet Cameras

Pole mount for Hanwha bullet cameras on 80mm+ posts with angle adjust
- Stainless steel straps resist corrosion in outdoor parking lots and building entrances
- Dark gray finish blends into infrastructure without visual clutter
- Adjustable tilt positioning lets you dial in coverage angles after installation
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01165-001

Axis T91B47 Stainless Steel Pole Mount 50–150mm - 01165-001

Stainless steel pole mount for 50–150mm diameter supports, indoor/outdoor
- 570mm stainless steel straps distribute load evenly and resist corrosion
- TX30 screw interface connects directly to Axis camera mounting points
- Single mount accommodates poles 2–6 inches in diameter across installations
In stock · Ships same business day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-156WMW

Hanwha SBP-156WMW Wall and Pole Mount

Wall and pole mount for Hanwha PTZ and IP cameras, aluminum white finish
- Dual-configuration bracket mounts to flat walls or round poles without swapping hardware
- Aluminum construction with white powder coat resists corrosion in outdoor environments
- Compatible with Hanwha Wisenet PTZ Plus and standard IP surveillance cameras
In stock · Ships same business day

$149.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: PMP-V-G

Hikvision PMP-V-G Horizontal Pole Mounting Bracket

Horizontal pole mount for Hikvision speed domes, 2.6"–5" poles
- Aluminum alloy construction with spray coating rated for indoor/outdoor use
- Supports up to 44 lbs for speed dome cameras and mounted accessories
- Simple installation on standard poles without requiring specialized tools
Special Order · Ships in 2-3 weeks

$44.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02411-001

Axis TQ5001-E Wall and Pole Mount - 02411-001

Rugged wall/pole mount for Axis PTZ cameras, IP66/NEMA 4X rated
- Supports 40 kg load with IP66, NEMA 4X, and IK10 impact protection
- Operates -50°C to 65°C with aluminum construction and white finish
- Compatible with Axis P55, P56, Q37, Q60, and Q61 series cameras
Special Order · Ships in 2-3 weeks

$184.53 $178.99 Save $5.54

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01473-001

Axis 01473-001 Pole Mount 65-165mm

Pole mount for 65–165mm diameter poles, powder-coated aluminum
- Fits standard utility poles 2.5–6.5" diameter without adapters
- Powder-coated aluminum with stainless steel straps resists outdoor corrosion
- 1.5" NPS thread directly compatible with Axis fixed dome pendant kits
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: DS-1603ZJ-POLE-P

Hikvision DS-1603ZJ-POLE-P Vertical Pole Mount

Vertical pole mount for Hikvision cameras, 67–127mm poles, 10kg capacity
- Aluminum alloy construction resists corrosion in outdoor and coastal environments
- Adjustable clamp fits standard poles 2.64–5 inches without drilling or modification
- Rated −40°C to 60°C; supports single and dual-camera surveillance setups
In stock · Ships same business day

$144.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01219-001

Axis T90 Wall and Pole Mount - 01219-001

Wall-and-pole mount for Axis T90 illuminators in outdoor and indoor sites
- Supports single or multiple T90 illuminators with configurable wall or pole mounting
- Rated for harsh outdoor and indoor conditions without separate hardware or adapters
- Optimized mechanical design maintains beam alignment in 24/7 surveillance deployments
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01470-001

Axis T91B57 Aluminum Pole Mount 57" - 01470-001

Aluminum pole mount for 4"–16" poles, indoor/outdoor surveillance
- Stainless steel straps (57") resist corrosion in outdoor environments
- Works with T91G61, T91H61 housings and T98A cabinet series
- TX30 screw interface for quick tool-free assembly and adjustment
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PM1

Hikvision PM1 Vertical Pole Mount, White

Stainless steel vertical pole mount, 22 lbs capacity, outdoor-rated
- Stainless steel construction resists rust and corrosion in wet climates
- Waterproof gasket seals pole interface against moisture and salt spray
- Supports up to 22 lbs; fits standard pole diameters without custom drilling
In stock · Ships same business day

$54.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QPL500-W

i-PRO WV-QPL500-W Pole Mounting Bracket

Pole mount bracket for i-PRO dome cameras in outdoor surveillance
- Secures to 1.5–3 inch diameter poles; white finish resists weather/UV
- Compatible with i-PRO WV-X15xx dome camera series for perimeter setups
- Weather-resistant construction holds alignment in rain, dust, thermal cycling
In stock · Ships same business day

$200.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01164-001

Axis T91B47 Stainless Steel Pole Mount - 01164-001

Stainless steel pole mount for 100–410mm poles, indoor/outdoor
- Fits standard traffic signals and light posts 4–16 inches diameter
- Stainless steel straps (1450mm pair) resist salt spray and corrosion
- TX30 tamper-resistant fasteners prevent vibration loosening
In stock · Ships same business day

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: PAPM4W

i-PRO PAPM4W White Outdoor Pole Mounting Bracket

White outdoor pole bracket with UV-resistant finish for secure camera positioning
- Corner form factor optimizes coverage on poles while maintaining compact mounting footprint
- IP67-rated and IK10-impact resistant for year-round outdoor durability in direct sunlight
- Fits round or square poles with adjustable height and angle for flexible deployment
In stock · Ships same business day

$77.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02851-001

Axis 02851-001 Wall-and-Pole Mount

Heavy-duty aluminum mount rated IP66/NEMA 4X and IK10 for outdoor cameras
- 40 kg load capacity handles larger cameras, PTZ units, and multi-sensor housings
- IK10 impact rating withstands 20 joules of force; resists vandalism and equipment strikes
- IP66/NEMA 4X casing blocks rain, dust, and salt spray in harsh industrial environments
In stock · Ships same business day

$217.52 $210.99 Save $6.53

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Wind Deflection

Pole mounts must support camera weight plus environmental stress (wind, ice, vibration). Calculate total load: camera + bracket + PoE injector + cable weight, then select mounts rated 2–3× higher. Undersized mounts are a primary cause of field failures during adverse weather or system incidents.

Pole Diameter & Clamp Compatibility

Standard poles range from 1–2.5 inch OD (light poles, utility poles, fence posts). U-bolt and adjustable clamp mounts must match your pole specification; measure twice and verify clamping surface area and tightening torque limits. Mismatched clamps lead to slip and misalignment.

Field-of-View Alignment & Pan/Tilt Range

Pole mounts with integrated ball joints or adjustable arms allow ±45° tilt and 360° pan. Plan camera angles during deployment; verify that mount articulation range supports your DORI (Detection, Observation, Recognition, Identification) requirements. Proper angle directly impacts frame rate and storage throughput.

Material Grade & Coastal/Industrial Corrosion

Stainless steel (SS304 or SS316) and hot-dip galvanized mounts resist salt spray and UV degradation in marine or industrial zones. Standard mild steel requires painting and regular maintenance. For multi-year deployments in harsh environments, specify 316 stainless or epoxy-coated hardware.

Cable Routing & Strain Relief

Pole mounts with integrated cable trays, spiral wrap, and P-clips reduce mechanical stress on PoE cables and connectors. Poor cable management causes voltage drop and power delivery failures, especially in runs exceeding 75 feet. Use ferrite cores and strain-relief boots at camera and injector ends.

Thermal & Vibration Isolation

Pole-mounted cameras experience temperature swings (−40°F to +140°F) and constant vibration from wind and traffic. Select mounts with elastomer isolators or vibration-dampening feet; verify thermal expansion/contraction specs for fasteners and mounting surfaces. Loose connections escalate failures across multi-site deployments.

Technology Stack

The specs and acronyms that actually affect pole mounts & brackets performance.

Load Rating (lbs)

Maximum static weight the mount can support without permanent deformation. Multiply camera + bracket + PoE + cable weight; then select mount rated 2–3× that total. Typical ratings: 10–50 lbs for single-camera arms, 50–200 lbs for multi-camera rails.

Pole Clamp Type (U-bolt, Adjustable, Swivel)

U-bolts fit fixed pole OD and require precise measurement. Adjustable clamps span ranges (1–2 in., 1.5–2.5 in.) with gradual tightening. Swivel clamps rotate 360° for angled pole installations. Choose based on pole geometry and future repositioning needs.

Material Grade & Finish (Stainless 304/316, Galvanized, Powder-Coated)

SS304 resists corrosion in mildly corrosive environments; SS316 adds molybdenum for salt-spray and marine duty. Hot-dip galvanized (ASTM A123) offers lower cost with 50+ year life in non-coastal zones. Epoxy powder coat adds UV and chemical protection.

Pan/Tilt Range (degrees)

Articulation limits for camera aiming. Ball-joint mounts offer ±45° tilt and 360° pan; fixed-arm mounts offer only pre-set angles. Verify range satisfies your field-of-view plan and permits maintenance access for lens cleaning.

Cable Conduit & Management Integration

Integral spiral wrap, P-clips, and cable trays route Ethernet, power, and coax without external fasteners. Reduces installation time, prevents abrasion, and improves weatherproofing. Critical for exposed outdoor runs exceeding 50 feet.

Vibration & Wind Load Deflection

Measure inches of deflection under rated load at full extension. Lower deflection (<0.5 in.) ensures stable image; high deflection causes continuous focus hunting and image blur. Wind load (psf) must be calculated per mount geometry and local building codes.

Typical Deployment Scenarios

Single Light-Pole Perimeter Point (1 camera, 40-ft pole)

Deploy one IP camera on adjustable single-pole mount with 24-inch reach arm. Use 2-inch U-bolt clamp (rated 20 lbs), stainless-steel fasteners, and pre-wired PoE injector in weatherproof junction box at pole base. Add cable spiral wrap from mount to base (60 feet of run). Brands like Axis and Hikvision offer compact arms rated for 10–15 lbs.

Multi-Camera Pole Rail Installation (3 cameras, 20-ft utility pole)

Mount three fixed-position cameras on a horizontal rail bracket clamped 1.5–2 inches to pole. Verify combined load (45 lbs camera + bracket + cable weight); select rail rated 100+ lbs. Route three separate PoE runs in conduit; use ferrite cores at injector. Speco Technologies and Vivotek manufacture compact multi-camera poles.

Angled Perimeter Deployment (2 cameras, 60-degree corner mount on 2.5-inch pole)

Use swivel pole clamp and angled extension arm to aim two cameras toward building corner at optimal DORI distance. Calculate combined load, wind load per local codes, and cable run length (may exceed 100 feet). Employ PoE extenders or secondary injector at midpoint. i-PRO offers commercial-grade swivel brackets.

Coastal/Marine Environment (2 cameras, stainless-steel pole kit, 35-ft installation)

Specify SS316 stainless mounts, fasteners, and cable trays rated for salt-spray (ASTM B117, 1000+ hrs). Use conformal-coated PoE injector in NEMA 4X enclosure. Inspect quarterly and use dielectric grease on all connections. Hanwha and Axis offer marine-duty component lines.

Frequently Asked Questions

What pole diameters do your mounts support?

Most adjustable pole clamps fit 1–2 inch OD poles (common for light poles, fence posts, and standard utility poles). Verify your pole measurement (use calipers, not tape) and cross-check against mount clamp range. Custom adapters are available for non-standard 2.5–3 inch poles; contact sales or ask an expert.

How do I calculate the correct load rating for my pole mount?

Add: camera weight (typically 1–4 lbs) + bracket weight (0.5–2 lbs) + PoE injector (0.5 lbs) + cable weight (0.1 lbs per 10 feet). Then multiply by 2–3 for safety margin and environmental stress (wind, vibration, ice). For example, a 4 lb camera + 1 lb bracket + 0.5 lb PoE + 1 lb cable = 6.5 lbs; select a mount rated 15+ lbs.

Can I extend the reach of a pole mount to improve camera angle?

Yes. Extension arms (12–48 inches) attach to standard pole clamps and project cameras horizontally or at angles. Longer arms increase wind load and require higher-rated clamps. Calculate wind deflection using your local wind-speed zone (ASCE 7) and mount arm length; most 24–36 inch arms require 25+ lb rated clamps. Ferrite cores on PoE cables reduce EMI in long runs.

What material should I use in coastal or high-corrosion environments?

Specify stainless steel 316 (SS316) for salt-spray and marine duty. Standard galvanized steel requires painting and maintenance; SS304 handles mildly corrosive indoor/industrial zones. All fasteners, clamps, and cable trays should match material grade. Conformal-coated PoE injectors and NEMA 4X enclosures add protection. Plan quarterly inspections.

How do I secure cables on pole-mounted cameras to prevent damage?

Use integral spiral wrap, P-clips, and cable conduit included with quality mounts. Route PoE and video cables separately when possible; use ferrite cores on PoE near the camera. For runs exceeding 75 feet, employ midpoint PoE injectors or extenders to prevent voltage drop. Strain-relief boots at connector ends reduce mechanical stress.

Do you offer pre-assembled pole mount kits?

Yes. We carry single-camera arms, multi-camera rail kits, and complete clamp + adapter assemblies. Multi-camera kits include coordinated cable management and load-distribution hardware. View our quote tool or contact sales to build a custom bill of materials for your site survey. Wall mounts and camera mounting hardware are also available for multi-location deployments.

Pole Mounts & Brackets

Plan Your Deployment

Showing Results for Pole Mounts & Brackets

Axis TX30 Steel Straps 570mm 1 Pair - 01472-001

Hikvision PM Pole Mount Adapter, White

Hanwha SBP-302PM Pole Mount for Bullet Cameras

Axis T91B47 Stainless Steel Pole Mount 50–150mm - 01165-001

Hanwha SBP-156WMW Wall and Pole Mount

Hikvision PMP-V-G Horizontal Pole Mounting Bracket

Axis TQ5001-E Wall and Pole Mount - 02411-001

Axis 01473-001 Pole Mount 65-165mm

Hikvision DS-1603ZJ-POLE-P Vertical Pole Mount

Axis T90 Wall and Pole Mount - 01219-001

Axis T91B57 Aluminum Pole Mount 57" - 01470-001

Hikvision PM1 Vertical Pole Mount, White

i-PRO WV-QPL500-W Pole Mounting Bracket

Axis T91B47 Stainless Steel Pole Mount - 01164-001

i-PRO PAPM4W White Outdoor Pole Mounting Bracket

Axis 02851-001 Wall-and-Pole Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Pole Mounts & Brackets

Frequently Asked Questions

Related Categories

Engineering Reading