Pendant Mounts & Brackets
Showing Results for Pendant Mounts & Brackets
-
ACTi
SKU: SMAX-0052
Acti SMAX-0052 Pendant Mount with Mount Kit
Pendant mount for suspended ceiling Acti camera installations
- Complete mount kit with fasteners and installation hardware included
- Indoor ceiling suspension design supports Acti camera systems
- Lightweight 1 lb assembly for straightforward field deployment
$172.00 $171.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 5507-271
Axis 5507-271 Telescopic Parapet Mount
Telescopic parapet mount for dome cameras, 783–1033 mm reach
- Extends 250 mm to fit varying parapet depths without custom fabrication
- 180-degree swivel rotates camera assembly for tool-free repositioning
- 1.5" NPS thread compatible with Axis fixed and PTZ dome cameras
In stock · Ships same business day$399.00 $386.99 Save $12.01The item has been added -
Axis
SKU: 03244-001
Axis Indoor Pendant Mount Kit - 03244-001
Pendant ceiling mount kit for Q3839-PVE and Q4809-PVE cameras
- Indoor pendant mount kit for Q3839-PVE / Q4809-PVE
- Vertical-suspension install for commercial ceilings
- 0.78 lb white mount for clean lobby and atrium look
$159.00 $153.99 Save $5.01The item has been added -
Axis
SKU: 03245-001
Axis Q3839-PVE Outdoor Pendant Mount Kit - 03245-001
Pendant mount kit for outdoor Q38/Q48 cameras with integrated weather hat
- Outdoor pendant mount kit for Q3839-PVE and Q4809-PVE
- Integrated weather hat shields camera and hardware
- Built for vertical-suspension outdoor mounting
$209.00 $201.99 Save $7.01The item has been added -
Axis
SKU: 5505-091
Axis T94M01D Outdoor Pendant Mount Kit - 5505-091
Outdoor pendant mount for Q3505-VE cameras on 1.5" NPS pipe
- IP67-rated, weather-resistant housing withstands rain and UV exposure
- Pendant design suspends camera from above for downward sight lines
- Direct fit to standard 1.5" NPS threaded pipes; works with T91A67 mounts
$73.00 $72.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02076-001
Axis T94N02D Pendant Kit Pole Mount - 02076-001
Pendant pole mount for Axis panoramic cameras with 1.5" NPS threads
- 1.5" NPS threaded brackets fit standard pole infrastructure without adapters
- Compatible with Axis P4705-PLVE and P4707-PLVE panoramic camera models
- Pendant form factor allows flexible mounting angles for optimal coverage positioning
In stock · Ships same business day$73.00 $72.99 Save $0.01The item has been added -
Axis
SKU: 02837-001
Axis TM4101 Pendant Mount Kit - 02837-001
Pendant mount for Axis IP cameras with 1.5" NPS and standard piping
- 1.5" NPS threaded brackets compatible with 3/4" and M20 pipe standards
- Indoor overhead mounting solution for secure camera suspension
- White housing designed for retail, corporate, and institutional deployments
$41.00 $40.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02924-001
Axis TP3105-E Black Pendant Mount Kit - 02924-001
Pendant mount kit for Axis P37 cameras with 1.5" NPS threaded connection
- 1.5" NPS threaded bracket connects directly to standard steel pipe
- Black powder-coated metal construction rated for indoor and outdoor use
- Supports pole, parapet, and corner mounting in single kit configuration
In stock · Ships same business day$105.00 $100.99 Save $4.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02925-001
Axis TP3106-E Pendant Kit 1.5" NPS - 02925-001
1.5" NPS threaded pendant kit for ceiling-mounted camera installations
- Threads directly onto 1.5" NPS conduit—no adapters required for standard installations
- Black finish blends into overhead structures in retail, corporate, and hospitality spaces
- Rated for indoor and outdoor use including covered areas, docks, and canopies
In stock · Ships same business day$52.00 $51.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 03233-001
Axis TP3108-E Pendant Mount Kit - 03233-001
Pendant mount kit for outdoor camera installations on walls, poles, or corners
- Pendant mount kit for TP3108-E with wall/pole/corner adapters
- Multi-mount flexibility for varied install scenarios
- Direct OEM fit preserves camera alignment and IP rating
$105.00 $100.99 Save $4.01The item has been added -
Axis
SKU: 02855-001
Axis TQ3103-E Pendant Kit Mounting Solution - 02855-001
Pendant mount for Axis Q36 cameras on poles, parapets, rooftop corners
- 1.5" NPS threaded bracket fits existing pole and pipe structures
- Mounts Axis Q36 series cameras to rooftops, perimeter poles, outer corners
- Outdoor weatherproof housing with professional-grade fasteners included
In stock · Ships same business day$129.00 $124.99 Save $4.01 -
Axis
SKU: 02110-001
Axis TQ6501-E Heavy-Duty Parapet Mount - 02110-001
40 kg parapet mount with IK10 impact rating for rooftop camera rigs
- Handles 40 kg load capacity for multi-camera or dual PTZ deployments
- IK10-rated aluminum body resists 20J impact strikes without damage
- Bottom and M20 side cable routing integrates with Axis pendant kits
$229.00 $221.99 Save $7.01The item has been added -
FLIR
SKU: 421-0069-00
FLIR Pendant Mount KIT - 421-0069-00
- Pendant mount kit for FLIR security cameras
- Enables ceiling-suspended installations in high-ceiling spaces
- Powder-coated aluminum/stainless for outdoor weather
$297.99 $198.99 Save $99.00The item has been added -
FLIR
SKU: 421-0068-00
FLIR Pendant Mount Shroud KIT - 421-0068-00
- Pendant mount shroud for ceiling-suspended FLIR cameras
- Powder-coated aluminum and stainless steel for outdoor durability
- Weather-resistant finish for canopies and parking structures
$99.99The item has been added -
FLIR
SKU: CM-CAPS-G3
FLIR Pendant mount shroud kit for CM-640x DH-390 R-290 - CM-CAPS-G3
- Pendant mount shroud for FLIR CM-640x and DH-390 cameras
- Environmental protection for ceiling and soffit installs
- Powder-coated aluminum/stainless for outdoor weather
$99.99The item has been added -
Geovision
SKU: 125-QSD5730-020
Geovision 125-QSD5730-020 QSD5730 Pendant Mount
- Pendant mount enables suspended ceiling installation for downward-facing coverage.
- Exclusively compatible with QSD5730 series, ensuring a verified mechanical fit.
- Supports stable camera alignment in corridors, atriums, and open overhead spaces.
$1,980.00 $1,246.99 Save $733.01The item has been added
Pendant Mounts & Brackets
Pendant mounts and brackets provide secure suspended mounting solutions for surveillance cameras in high-ceiling and open commercial environments. These components support proper field-of-view alignment, structural stability, and clean cable routing.
Plan Your Deployment
- Camera compatibility and mounting interface alignment
- Required drop length and ceiling height considerations
- Load-bearing capacity and structural support requirements
- Indoor vs outdoor environmental conditions
- Service access and long-term stability planning
Pendant Mounts & Brackets — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 54 working models of pendant mounts & brackets sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP |
| IP Rating | IP67, IP66 |
| Connectivity | Wired |
| Power | PoE |
| Type | Accessory, PTZ, Adapter |
| Durability | Indoor/Outdoor |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.