Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Pelco

SKU: SRXV2-WMT-1001

Pelco SRXV2-WMT-1001 Wall Mount Bracket

Wall mount bracket for Pelco Sarix Value 2 dome cameras
- Adjustable positioning on drywall, studs, concrete, or masonry surfaces
- Optimal lens geometry offset from wall for improved field-of-view angles
- NDAA Section 889 compliant for regulated security installations
In stock · Ships same business day

$95.00 $79.99 Save $15.01
Compare

Out of stock
Pelco

SKU: SWM-GY

Pelco SWM-GY Spectra Wall Mount Gray

Surface wall mount for Pelco Spectra dome cameras, gray finish
- Integrated cable routing through mount body keeps connections protected
- Surface-mount design eliminates need for ceiling or structural modifications
- Gray finish matches Spectra hardware for cohesive professional installations
In stock · Ships same business day

$63.44 $52.99 Save $10.45
Compare

Out of stock
Pelco

SKU: SWM-PA-GY

Pelco SWM-PA-GY Pole Mount Adapter Gray

Pole mount adapter converts Pelco SWM-GY wall systems to pole installations
- Direct conversion from wall to pole mount without separate bracketing needed
- Gray finish matches Pelco hardware for consistent outdoor surveillance aesthetics
- NDAA Section 889 and TAA compliant for government and infrastructure deployments
Special Order · Ships in 2-3 weeks

$37.84 $31.99 Save $5.85

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SWM-SR

Pelco SWM-SR Dome Wall Mount Light Gray

Surface-mount wall bracket for Pelco dome cameras, light gray finish
- Integrated cable routing through mount body for clean professional appearance
- NDAA Section 889 and TAA compliant for government and GSA Schedule projects
- Compatible with Pelco dome camera systems; verify model before ordering
Special Order · Ships in 2-3 weeks

$63.44 $52.99 Save $10.45

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SWM-SW

Pelco SWM-SW Compact Environmental Wall Mount White

Compact white wall mount for Pelco cameras in architecturally sensitive sites
- Weather-rated environmental protection rated for outdoor installations
- RAL9003 pure white finish blends with light facades and stucco
- Compact profile minimizes visual impact and wind loading on structures
Special Order · Ships in 2-3 weeks

$86.85 $72.99 Save $13.86

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEAC

Pelco UEAC 316L Stainless Corner Adapter

316L stainless corner adapter for ULISSE EVO cameras in corrosive environments
- Marine-grade 316L stainless steel resists chloride and crevice corrosion
- Angular offset corner mount designed for ULISSE EVO Series camera placement
- NDAA Section 889 compliant for regulated security deployments
Special Order · Ships in 2-3 weeks

$155.10 $129.99 Save $25.11

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEAP

Pelco UEAP ULISSE EVO 316L Stainless Pole Adapter

Marine-grade 316L stainless pole adapter for ULISSE EVO PTZ cameras
- AISI 316L stainless steel resists chloride and salt-spray corrosion
- Adjustable clamp fits multiple pole diameters for flexible mounting
- NDAA Section 889 compliant for government and regulated installations
Special Order · Ships in 2-3 weeks

$133.33 $99.99 Save $33.34

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEAW

Pelco UEAW 316L Stainless Wall Counter-Plate

Marine-grade 316L stainless steel wall backing plate for ULISSE EVO
- AISI 316L stainless steel resists corrosion in coastal and marine environments
- Load-distribution backing prevents bracket pullthrough on weak wall assemblies
- Compatible with Pelco ULISSE EVO Series wall-mounted bracket systems
Special Order · Ships in 2-3 weeks

$169.48 $141.99 Save $27.49

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEBP4AA

Pelco UEBP4AA ULISSE EVO Parapet Bracket Hi-PoE

Parapet bracket for ULISSE EVO PTZ cameras with integrated Hi-PoE
- Hi-PoE (4-pair) RJ45 connector powers ULISSE EVO PTZ without external supplies
- Built-in alarm inputs and relay outputs eliminate external wiring adapters
- RAL 9002 off-white finish for discrete mounting on parapets and flat surfaces
Special Order · Ships in 2-3 weeks

$215.00 $179.99 Save $35.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEBP7AA

Pelco UEBP7AA ULISSE EVO Parapet Bracket Hi-PoE

Parapet bracket for ULISSE EVO PTZ with integrated high-power PoE
- High-power PoE connector with built-in alarm inputs and relay outputs
- Mounts on parapet walls and flat surfaces in RAL 9002 off-white finish
- Consolidates power and control in single unit; eliminates external adapters
Special Order · Ships in 2-3 weeks

$265.00 $220.99 Save $44.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEBWAA

Pelco UEBWAA Wall Bracket for ULISSE EVO PTZ Camera

Wall bracket engineered for ULISSE EVO PTZ cameras with dynamic load rating
- Handles full camera weight plus pan-tilt-zoom stress on concrete/steel substrates
- Integrated cable routing for power and communications eliminates exposed wire runs
- RAL9002 gray-white finish matches ULISSE EVO body for unified facade appearance
In stock · Ships same business day

$78.18 $65.99 Save $12.19
Compare

Out of stock
Pelco

SKU: UPTIRNBKT

Pelco UPTIRNBKT IR Illuminator Mounting Bracket

Adjustable bracket for UPTIRN IR illuminators, pole/wall/parapet mount
- Adjustable aim mechanism aligns IR beam with camera field of view
- IP66 rated for outdoor use on pole, wall bracket, or parapet surfaces
- NDAA Section 889 compliant for government and enterprise deployments
Special Order · Ships in 2-3 weeks

$277.47 $231.99 Save $45.48

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UPTJBUL

Pelco UPTJBUL ULISSE EVO UL Weatherproof Junction Box

UL-listed weatherproof junction box for ULISSE EVO PTZ cameras
- Sealed cable termination enclosure protects connections from moisture and debris
- Bracket-integrated mount with purpose-built threads for ULISSE EVO systems
- NDAA Section 889 compliant for government and regulated facility deployments
Special Order · Ships in 2-3 weeks

$276.14 $230.99 Save $45.15

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UPTWBA

Pelco UPTWBA Wall Bracket Internal Cable ULISSE EVO

Wall bracket for ULISSE EVO PTZ cameras with internal cable routing
- Internal cable channel protects wiring from weather and UV damage
- Surface wall-mount design for building facades and perimeter walls
- NDAA Section 889 compliant for government security deployments
Special Order · Ships in 2-3 weeks

$140.34 $116.99 Save $23.35

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UPTWBQ2B_FLIR

Pelco UPTWBQ2B_FLIR ULISSE EVO Wall Bracket

Wall bracket for Pelco ULISSE EVO PTZ cameras, FLIR color-matched
- Handles PTZ dynamic loads with same capacity as standard UPTWBA model
- FLIR color finish integrates with thermal imaging systems in hybrid setups
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$160.00 $121.99 Save $38.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UPTWBTAB

Pelco UPTWBTAB Parapet Bracket Internal Cable

Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing
- Integrated internal cable channel hides wiring for clean professional installations
- Designed for flat-roof parapet walls to position camera above roofline
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$140.34 $116.99 Save $23.35

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Pelco SRXV2-WMT-1001 Wall Mount Bracket

Pelco SWM-GY Spectra Wall Mount Gray

Pelco SWM-PA-GY Pole Mount Adapter Gray

Pelco SWM-SR Dome Wall Mount Light Gray

Pelco SWM-SW Compact Environmental Wall Mount White

Pelco UEAC 316L Stainless Corner Adapter

Pelco UEAP ULISSE EVO 316L Stainless Pole Adapter

Pelco UEAW 316L Stainless Wall Counter-Plate

Pelco UEBP4AA ULISSE EVO Parapet Bracket Hi-PoE

Pelco UEBP7AA ULISSE EVO Parapet Bracket Hi-PoE

Pelco UEBWAA Wall Bracket for ULISSE EVO PTZ Camera

Pelco UPTIRNBKT IR Illuminator Mounting Bracket

Pelco UPTJBUL ULISSE EVO UL Weatherproof Junction Box

Pelco UPTWBA Wall Bracket Internal Cable ULISSE EVO

Pelco UPTWBQ2B_FLIR ULISSE EVO Wall Bracket

Pelco UPTWBTAB Parapet Bracket Internal Cable

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading