i-PRO M-PARAPET PTZ Parapet Mount
Overview
The M-PARAPET is a rack-type parapet mount engineered for outdoor installation of i-PRO PTZ dome cameras on building ledges, rooflines, and horizontal surfaces. The gooseneck-style aluminum alloy bracket positions the camera clear of the parapet edge, delivering 360° pan freedom without ledge obstruction — a critical advantage when you need full-perimeter surveillance from a single elevated position. This mount solves the install problem of PTZ cameras that would otherwise collide with a parapet wall during pan rotation.
Compatibility
The M-PARAPET is engineered specifically for i-PRO PTZ dome camera models, with confirmed compatibility to the M-200-P platform and related i-PRO PTZ families. Parapet mounts are model-specific due to mounting interface tolerances and load-bearing design — verify your exact PTZ model against i-PRO's published compatibility matrix before ordering. The mount will not work with non-i-PRO PTZ domes or incompatible i-PRO models. Contact i-PRO directly or consult your VAR for a definitive compatibility list.
Installation Notes
This is a structural outdoor mount for permanent installation on concrete or steel parapets. The bracket weighs 4.3 kg (9.47 lb); add your PTZ camera weight and cable routing to calculate total anchor-point load. The gooseneck geometry positions the camera approximately 879 mm (34.6") horizontally and 831 mm (32.7") vertically from the mounting surface, allowing full pan without interference. Aluminum alloy construction resists corrosion in salt-air and industrial environments — use stainless steel anchor bolts in corrosive settings. Ensure your mounting surface can sustain both static load and dynamic forces generated by PTZ pan-tilt-zoom movement during continuous operation. Standard installation tools and concrete anchors (not included) are required.
