Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Hanwha

SKU: HT-E-BFW320SW

Hanwha HT-E-BFW320SW Explosion Proof Camera Wall Mount

Stainless steel wall mount for Class I & II explosion-proof cameras
- Fits TNO-6070EP, TNO-6320EP, TNO-6070E1W, TNO-6320E1W models
- Stainless steel construction resists corrosion in hazardous locations
- Adjustable angle and height positioning for optimal field of view
Special Order · Usually Ships in 2-3 Weeks

$1,650.00 $1,221.99 Save $428.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-E-BFW50SW

Hanwha HT-E-BFW50SW Explosion-Proof Camera Wall Mount

Stainless steel wall mount for explosion-proof cameras in hazardous zones
- Class I, II, III explosion-proof rated for petrochemical, refinery, and pharmaceutical facilities
- Corrosion-resistant stainless steel construction withstands harsh chemical environments
- Compatible with TNO-6070EF2, TNO-6320EF2, TNO-6070EWF2, TNO-6320EWF2 models
Special Order · Usually Ships in 2-3 Weeks

$1,650.00 $1,350.99 Save $299.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-E-BPW6800

Hanwha HT-E-BPW6800 PTZ Wall Mount

Stainless steel wall mount for TNP-xxx explosion-proof PTZ cameras
- Electro-polished stainless steel construction resists corrosion in hazardous environments
- Precision-fitted for TNP-xxx series with full pan-tilt-zoom positioning capability
- Rated for Class I/II hazardous locations in oil, gas, chemical, and mining sites
Special Order · Usually Ships in 2-3 Weeks

$1,475.00 $1,091.99 Save $383.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-F1XX-WM

Hanwha HT-F1XX-WM Wall Mount for Explosion Proof

316L stainless steel wall mount for explosion-proof cameras
- 316L stainless steel resists corrosion in hazardous, outdoor, and coastal environments
- Compatible with TNO-X6072EPT1-Z, TNO-X8072EPT1-Z, TNO-X6322EPT1-Z models
- Wall-mounted design for secure, stable positioning indoors and outdoors
Special Order · Usually Ships in 2-3 Weeks

$1,450.00 $1,086.99 Save $363.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-SD-CM

Hanwha HT-SD-CM Corner Mount Adapter

Corner mount adapter for hazardous-area surveillance in stainless steel
- 316L stainless steel construction resists corrosion indoors and outdoors
- Mounts to HT-SD-WM and HT-F1XX-WM wall mount systems for corner placement
- Rated for Class I Division 1/2 hazardous locations and explosive atmospheres
Special Order · Usually Ships in 2-3 Weeks

$1,255.00 $929.99 Save $325.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-SD-WM

Hanwha HT-SD-WM Wall Mount for Explosion-Proof Cameras

316L stainless steel wall mount for explosion-proof camera installations
- 316L stainless steel resists salt spray and chemical vapor corrosion
- Upright or inverted mounting orientation fits ceiling and wall deployments
- Compatible with TNP-X6322EPT3-Z and TNP-Q6232EPT3-Z explosion-proof cameras
Special Order · Usually Ships in 2-3 Weeks

$2,790.00 $2,065.99 Save $724.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-SPMA-SD

Hanwha HT-SPMA-SD Pole Mount for Explosion Proof

Pole mount for explosion-proof cameras up to 6-inch diameter
- Mounts HT-SD-WM and HT-F1XX-WM cameras on standard poles
- Supports poles up to 6 inches in diameter for flexible positioning
- White construction designed for hazardous location installations
Special Order · Usually Ships in 2-3 Weeks

$2,260.00 $1,672.99 Save $587.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: NOP-IO168S

Hanwha NOP-IO168S Access Control I/O Expansion Panel

16-input/8-output I/O expansion for NOP Series access controllers
In stock · Usually Ships Same Business Day

$1,420.00 $1,051.99 Save $368.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: NOP-RI2MS

Hanwha NOP-RI2MS Reader Interface Expansion Panel

Reader expansion panel with 2 Wiegand/OSDP ports and 4 relay outputs
Special Order · Usually Ships in 2-3 Weeks

$1,035.00 $766.99 Save $268.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC29-016958A

Hanwha PNM-C16013RVQ 4MP AI Dome Camera

360° 4MP AI dome with 20m IR and IK09 impact resistance
Special Order · Usually Ships in 2-3 Weeks

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-137WMA

Hanwha SBD-137WMA Wall Adapter Plate White

White wall adapter plate for Hanwha dome cameras ø137.5mm
- Aluminum construction with RAL9003 white finish resists corrosion
- Circular ø137.5 × 6.7mm design enables rotational camera positioning
- TR20 mount screw compatibility with QNV-C8083R and QNV-C9083R models
In stock · Usually Ships Same Business Day

$20.00 $15.99 Save $4.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-140KMB

Hanwha SBD-140KMB Corner Mount Adapter

SUS304 stainless steel corner mount for Hanwha Q/QN/QNE/LND/ANE cameras
- White RAL9003 finish, 121×102.5mm compact size fits discrete corner installations
- SUS304 stainless steel resists corrosion in indoor and outdoor environments
- Compatible with 20+ Hanwha camera models across Q, QN, QNE, LND, and ANE series
In stock · Usually Ships Same Business Day

$70.00 $52.99 Save $17.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-140PMB

Hanwha SBD-140PMB White Pole Mount Base

SUS304 stainless steel pole mount base for outdoor Hanwha cameras
- SUS304 stainless steel with white powder coat resists salt spray and corrosion
- Compact 121 x 70 mm footprint minimizes visual impact on pole installations
- TR20 Torx screw interface compatible with QNV, QND, QNF, QNE, LND, ANE series
In stock · Usually Ships Same Business Day

$70.00 $53.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-140PMW

Hanwha SBD-140PMW Pole Mount Base White

Aluminum pole mount base for outdoor IP cameras, white finish
- Aluminum core with plastic cap resists corrosion in coastal/harsh environments
- Compact ø147.1mm footprint minimizes wind load and visual impact on poles
- Dual TR20/TR30 screw threads fit Hanwha cameras and steel mounting straps
In stock · Usually Ships Same Business Day

$49.00 $37.99 Save $11.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-180PMW

Hanwha SBD-180PMW Pole Mount Base White

Aluminum pole mount base for Hanwha Wisenet X/P cameras, outdoor-rated
- Aluminum core with weather-resistant plastic cap resists corrosion in coastal/humid environments
- Lightweight 370g design reduces structural load on existing pole installations
- Compact ø187.1 mm footprint with M25 conduit hole fits standard pole configurations
In stock · Usually Ships Same Business Day

$70.00 $53.99 Save $16.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBL-101C

Hanwha SBL-101C Remote Head Camera Corner Mount

White polycarbonate corner mount for Hanwha SLA and XNB cameras
- Fits discreetly in corners while securing remote camera heads in place
- Compatible with SLA-T4680, SLA-T2480, PNM9000QB, XNB-6001 and variants
- Durable polycarbonate construction rated -10°C to +45°C operating range
Special Order · Usually Ships in 2-3 Weeks

$39.00 $29.99 Save $9.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Hanwha HT-E-BFW320SW Explosion Proof Camera Wall Mount

Hanwha HT-E-BFW50SW Explosion-Proof Camera Wall Mount

Hanwha HT-E-BPW6800 PTZ Wall Mount

Hanwha HT-F1XX-WM Wall Mount for Explosion Proof

Hanwha HT-SD-CM Corner Mount Adapter

Hanwha HT-SD-WM Wall Mount for Explosion-Proof Cameras

Hanwha HT-SPMA-SD Pole Mount for Explosion Proof

Hanwha NOP-IO168S Access Control I/O Expansion Panel

Hanwha NOP-RI2MS Reader Interface Expansion Panel

Hanwha PNM-C16013RVQ 4MP AI Dome Camera

Hanwha SBD-137WMA Wall Adapter Plate White

Hanwha SBD-140KMB Corner Mount Adapter

Hanwha SBD-140PMB White Pole Mount Base

Hanwha SBD-140PMW Pole Mount Base White

Hanwha SBD-180PMW Pole Mount Base White

Hanwha SBL-101C Remote Head Camera Corner Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading