Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: CDS-MOUNT-FIXW-NI
ACTi Cds-mount-fixw-ni
- Fixed wall mount eliminates pan-tilt hardware where a set sightline is sufficient.
- Designed for ACTi dome cameras — verify model compatibility before installation.
- Mount to structural backing (studs, concrete, steel) for vibration-stable long-term aim.
$49.00 $48.99 Save $0.01The item has been added -
ACTi
SKU: CDS-NIO43-NIDS-S15
ACTI Cds-NIO43-Nids-S15
- PCAP touch technology ensures reliable multi-touch input in demanding environments.
- HDMI, USB-C, USB, and Ethernet ports support flexible AV and network integration.
- Wall-mount form factor simplifies installation in control rooms or lobby deployments.
$904.99The item has been added -
ACTi
SKU: CDS-NIO55-NIDS-S10
ACTI Cds-NIO55-Nds-S10 - Cds-NIO55-Nids-S10
- Extends Ethernet connectivity to ACTi NIO55 series recorders and CDS platforms.
- Bridges isolated recording systems to IP infrastructure for NVR integration.
- Cold-install module seats in designated slot; verify link via management UI before service.
$1,699.00 $1,407.99 Save $291.01The item has been added -
ACTi
SKU: CDS-NIO55-NIDS-S20
ACTI Cds-NIO55-Nids-S20
- Extends Ethernet network ports on ACTi NIO-series NVR deployments via RJ-45.
- Bridges video traffic onto isolated segments, reducing bandwidth contention.
- Mounts near existing NVR or switch infrastructure to minimize cable runs.
$1,307.99The item has been added -
ACTi
SKU: CDS-TMBDS-WAYP-32
ACTI Cds-Tmbds-Wayp-32
- Purpose-built ACTi hardware module maintains factory specs across your deployment.
- Engineered for commercial installation environments requiring reliable system expansion.
- Verify compatibility with your ACTi cameras, NVRs, or platforms before ordering.
$1,810.99The item has been added -
ACTi
SKU: CDS-TTPDS-TABT-238
ACTI Cds-Ttpds-Tabt-238
$1,699.00 $1,508.99 Save $190.01The item has been added -
ACTi
SKU: CDS-VUEVP-76P-P19
ACTI Cds-Vuevp-76P-P19
- ACTi-native bracket ensures mechanical compatibility with supported ACTi camera models.
- Designed for fixed installations, supporting both indoor and outdoor deployment scenarios.
- Follow ACTi fastener specs during install to maintain full warranty coverage on the bracket.
$12,364.99 $11,303.99 Save $1,061.00The item has been added -
ACTi
SKU: LTE-120V
ACTI Cellular Kit For Local 120VAC - LTE-120V
- Enables LTE cellular connectivity at remote sites where wired internet is unavailable.
- Runs on 120V AC local power, eliminating the need for external power conversion hardware.
- Component kit form factor slots cleanly into standardized ACTi deployment bill of materials.
$1,599.00 $1,492.99 Save $106.01The item has been added -
ACTi
SKU: CDS-TMBDS-WAYP32+TAF
ACTi Clear Digital 32 Inch Pcap Touch - CDS-TMBDS-WAYP32+TAF
- 32" PCAP touchscreen supports multi-touch gestures for PTZ and VMS control.
- HDMI, USB-C, USB, and Ethernet ports simplify single-cable or networked deployments.
- PCAP technology registers input through gloves, suitable for industrial security posts.
$1,970.99The item has been added -
ACTi
SKU: CDS-MBLDS-EVOH+TAF
ACTi Clear Digital EVO Roll Digital Signage - CDS-MBLDS-EVOH+TAF
- IP54-rated enclosure resists dust and water spray for entryways and wash-down zones.
- 1920×1080 Full HD at 480 nits delivers legible content in mixed ambient lighting.
- VESA/wall mount and HDMI input integrate with existing media players and VMS outputs.
$5,030.99The item has been added -
ACTi
SKU: CDS-MBLDS-EVOT-H+TAF
ACTi Clear Digital EVO Roll Tall Digital - CDS-MBLDS-EVOT-H+TAF
- Designed for ACTi Clear Digital EVO series, ensuring native interface compatibility.
- Standardized mounting reduces integration time across multi-camera deployments.
- Proprietary ACTi component; verify camera model and system version before ordering.
$5,355.99The item has been added -
ACTi
SKU: CDS-MBLDS-EVOT-M+TAF
ACTi Clear Digital EVO Roll Tall Digital - CDS-MBLDS-EVOT-M+TAF
- 1920×1080 resolution ensures legible content across lobby and showroom viewing distances.
- Ethernet connectivity supports reliable wired network integration in managed signage deployments.
- Included mobile floor stand enables quick repositioning without permanent wall-mount hardware.
$3,674.99The item has been added -
ACTi
SKU: CDS-MUV27-INDS-V27+TAF
ACTi Clear Digital MUV PRO 27 - Mobile - CDS-MUV27-INDS-V27+TAF
- 27-inch PCAP touch display suits interactive indoor digital signage deployments.
- HDMI, USB-C, USB, and Ethernet ports simplify AV and network integration.
- Mobile kiosk form factor supports flexible, self-contained installation layouts.
$2,599.00 $2,337.99 Save $261.01The item has been added -
ACTi
SKU: CDS-TTPDS-TABT-238+TAF
ACTi Clear Digital TAB Tall Interactive - CDS-TTPDS-TABT-238+TAF
- 23.8" PCAP touch display supports precise credential scanning at visitor kiosks.
- HDMI, USB-C, USB, and Ethernet ports enable flexible integration with access control systems.
- Tabletop form factor simplifies deployment at reception desks and unmanned entry points.
$1,829.00 $1,662.99 Save $166.01The item has been added -
ACTi
SKU: CDS-SHODS-ZENS+TAF
ACTi Clear Digital ZEN Media Player Stick - - CDS-SHODS-ZENS+TAF
- Stick form factor delivers live and recorded video playback without a full server.
- Integrates with ONVIF-compliant VMS platforms and ACTi surveillance ecosystems.
- Deploys in control rooms or remote stations with minimal infrastructure changes.
$114.00 $113.99 Save $0.01The item has been added -
ACTi
SKU: CDS-TMBDS-WAYP43+TAF
ACTi Clear Touch 43 Inch Pcap Touch - CDS-TMBDS-WAYP43+TAF
- 43-inch PCAP touch surface responds to finger input with no pressure required.
- USB touch output integrates with any ONVIF Profile S VMS supporting touch remapping.
- VESA-compatible mount supports wall or desk deployment on standard 43-inch brackets.
$2,476.99The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.