ACTi CTI-WFMOD-DBBT Dual Band Wireless Module

Overview

The CTI-WFMOD-DBBT is a dual-band wireless expansion module that adds 802.11ac and 802.11n connectivity to compatible ACTi cameras. It eliminates the need for ethernet cabling in deployments where running conduit or network drops is costly or impractical — conference rooms, retail overhead ceilings, temporary event coverage, or retrofit sites where wall penetration is restricted. Install it directly onto a compatible ACTi camera body and configure via the camera's web interface or mobile app.

Compatibility

This module is designed for ACTi camera models that support modular wireless expansion. Verify compatibility with your specific camera model before purchase — the CTI-WFMOD-DBBT fits ACTi's modular camera line but is not universally compatible across all brands or older ACTi models. Check the camera's product documentation or contact the manufacturer directly to confirm your model accepts this module.

Installation Notes

Mount the module to the camera's expansion connector or designated module port. Secure placement away from metal enclosures, large water features, or dense interference sources (microwave ovens, 5GHz wireless systems operating on the same channel) to maintain signal strength. Position the antenna for optimal reception — typically vertical or at 45 degrees depending on mounting orientation. Configure SSID, security protocol (WPA2/WPA3 recommended), and static or DHCP IP addressing through the camera's management interface. No external power supply required — the module draws power from the camera itself.