Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Axis
SKU: 02797-001
Axis TQ1921 M20x1.5 to 1/2 NPT Adapter - 02797-001
M20x1.5 to 1/2 NPT adapter for hazardous area camera installations
- Nickel-plated brass construction withstands corrosive industrial environments
- ATEX/IECEx certified for Zone 1 & Zone 2 gas and dust hazardous areas
- RoHS and REACH compliant, PVC-free design for regulated supply chains
$73.00 $72.99 Save $0.01The item has been added -
Axis
SKU: 02799-001
Axis TQ1925 M25x1.5 to M20x1.5 Adapter - 02799-001
M25x1.5 to M20x1.5 thread adapter for ATEX explosion-protected cameras
- Nickel-plated brass construction resists corrosion in hazardous environments
- ATEX/UKEX II 2G 1D and IECEx certified for explosive atmospheres
- RoHS and REACH compliant with PVC-free, BFR/CFR-free materials
$73.00 $72.99 Save $0.01The item has been added -
Axis
SKU: 02842-001
Axis TQ1930-E Front Window Kit - 02842-001
Protective front window for Axis cameras with dual coatings
- Anti-scratch and anti-reflective coatings maintain optical clarity
- Shields against dust, debris, moisture, and weather exposure
- Compatible with Axis surveillance camera systems indoors and outdoors
$105.00 $100.99 Save $4.01The item has been added -
Axis
SKU: 03004-001
Axis TQ1937-E 850nm IR Illuminator Kit - 03004-001
850nm IR illuminator kit with 50m range for Q16/P13 cameras
- 850nm IR illuminator with 50-meter effective range
- Dual-lens config: 2 wide-angle + 2 tele for flexible coverage
- IP66/IP67 + IK10 outdoor and washdown-rated
$179.00 $172.99 Save $6.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02269-001
Axis TU1001-VE Compact Outdoor Microphone - 02269-001
IP66 compact outdoor mic with 71.4 dB SNR for networked systems
- Hemispherical pickup captures balanced ambient audio across 20 Hz–20 kHz
- IP66-rated aluminum casing handles –20 °C to 60 °C outdoor conditions
- Ultra-low 0.006 W power draw with 3.5 mm stereo plug connectivity
$169.00 $162.99 Save $6.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02082-001
Axis TU1002-VE Professional Microphone Kit - 02082-001
Professional microphone kit for Axis network audio systems
- 74 dB signal-to-noise ratio with 112 dB max SPL for clear audio
- IP66/IK10 rated housing withstands indoor and outdoor conditions
- 20 Hz–20 kHz frequency response captures full audio spectrum
In stock · Ships same business day$169.00 $162.99 Save $6.01The item has been added -
Axis
SKU: 02469-021
Axis TU6006 FAKRA Connector Kit 10-Pack - 02469-021
FAKRA connectors for TU6005 plenum cable—10-pack for code-compliant installs
- Plenum fire and smoke rated for suspended ceilings, HVAC plenums, data centers
- FAKRA design supports thousands of mating cycles with minimal signal loss
- 10-pack quantity reduces procurement friction for multi-run deployments
$39.00 $38.99 Save $0.01The item has been added -
Axis
SKU: 02794-021
Axis TU6008 5-PIN Terminal Block Connector 10-Pack - 02794-021
5-PIN terminal block connectors for RS232/RS485 serial systems, 10-pack
- 2.5 mm pitch spacing fits compact installations across Axis devices
- Dual protocol support handles both RS232 and RS485 serial communication
- 10-pack quantity covers multi-device projects and spare inventory needs
$24.00 $22.99 Save $1.01The item has been added -
Axis
SKU: 02800-001
Axis XFQ1656 Replacement Washer Nozzle Stainless Steel - 02800-001
316L stainless steel replacement nozzle for AXIS XFQ1656 lens cleaning
- 316L stainless washer nozzle for the Axis XFQ1656
- Optimized spray pattern for consistent lens cleaning
- Built for coastal and marine outdoor deployments
$63.00 $60.99 Save $2.01The item has been added -
Axis
SKU: 02803-001
Axis XFQ1656 Silicon Wiper Blade 5-Pack - 02803-001
Silicon wiper blades for AXIS XFQ1656 outdoor cameras—pack of 5
- 5-pack of silicon wiper blades for the Axis XFQ1656
- Streak-free lens cleaning in wet and dusty conditions
- Direct-fit replacement spare for outdoor cameras
$52.00 $51.99 Save $0.01The item has been added -
Bosch
SKU: D8129
Bosch D8129 Octo-Relay Module
8-relay module for Bosch security panels with DIN rail mounting
- D8129 octo-relay module with 8 relays for signal switching
- UL listed for Bosch security system integration
- Compatible with B3512/B4512/B5512/B6512/B8512G/B9512G
$165.00 $164.99 Save $0.01The item has been added -
Bosch
SKU: DCNM-FMICB
Bosch Flush microphone button panel - DCNM-FMICB
- Flush microphone button panel with LED speak-indication for Bosch DCN
- Visual feedback shows active mic state in multi-participant rooms
- Direct wall-cavity install for built-in conference table integration
$103.00 $102.99 Save $0.01The item has been added -
Bosch
SKU: DCN-FMIC
Bosch Flush Microphone Connection Panel - DCN-FMIC
- Flush microphone connection panel for Bosch DCN audio systems
- Embeds audio input into table, wall, or equipment-front cutouts
- Eliminates external mic preamp boxes from clean install aesthetics
$78.10 $77.99 Save $0.11The item has been added -
Bosch
SKU: DCNM-FMCP
Bosch Flush microphone connection panel - DCNM-FMCP
- Flush microphone connection panel with two-way audio for Bosch DCN
- Combined mic input and speaker output in one wall plate
- Shock-mount isolation cuts vibration coupling into the audio path
$115.00 $114.99 Save $0.01The item has been added -
Bosch
SKU: DCN-FMICB-D
Bosch Flush Microphone Control Panel Dark - DCN-FMICB-D
- Flush microphone control panel in dark finish for Bosch DCN systems
- Wall-flush mount fits standard cavity cutouts cleanly
- Drops into DCN conference and security audio architecture
$90.30 $89.99 Save $0.31The item has been added -
Camden
SKU: CX-IRB-6
Camden CX-IRB-6 Isolation Relay Module (6-Pack)
- Optical isolation blocks 24VDC switching transients from damaging TCP/IP control circuits.
- Direct Ethernet control removes parallel wiring harnesses in distributed cabinet layouts.
- Six-module pack covers small-to-medium multi-door deployments from a single order.
$156.99The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.