Pelco

SKU: VX-S2-HDTRAY

Pelco VX-S2-HDTRAY Empty HD Carrier Tray

Hot-swap HD carrier tray for VxStorage Series 2 E and T chassis

• Hot-swap connector design installs drives without taking NVR offline
• Compatible with VxStorage Series 2 E expansion and T tower models
• NDAA Section 889 compliant for regulated surveillance deployments

Pelco

SKU: WASEX2T4IC

Pelco WASEX2T4IC ExP Tank 10L IECEx Pipe Assembly

• IP66-rated enclosure withstands high-pressure washdowns and salt-spray environments.
• IECEx Group II certification covers explosive atmospheres without site variance approvals.
• Integrated pipe assembly eliminates field threading, reducing leak points and install time.

Pelco

SKU: WASPT0V23L11M00

Pelco WASPT0V23L11M00 PTZ Wash System 23L

PTZ wash system with 23L tank and 11m hose for remote dome maintenance

• 23-liter tank capacity extends service intervals at high-contamination sites
• 11-meter supply hose reaches distant PTZ positions without relocation
• Multi-voltage input (230/120 VAC, 24 VAC) integrates with existing power

Pelco

SKU: WASPT1V23L30M00

Pelco WASPT1V23L30M00 PTZ Wash System 23L

23L wash system with 30m hose for remote PTZ camera cleaning

• 23-liter reservoir with integrated pump and auto-refill float valve
• 30-meter supply hose reaches distant PTZ cameras on poles and structures
• 230 Vac operation designed for Pelco WASPT-series PTZ housings

Pelco

SKU: WASPT3V23L30M00

Pelco WASPT3V23L30M00 PTZ Wash System 23L 30m

23L wash system with 30m hose for remote PTZ camera cleaning

• 23-liter tank capacity supports extended intervals between refills
• 30-meter hose reaches distant camera positions on tall poles
• 120 Vac pump with automatic float valve for unattended operation

Posiflex

SKU: MA200

Posiflex MA200 Accessory Pack For MT2100 Series *pl

• Factory-matched charger and cables eliminate power negotiation issues with MT2100 units.
• Bundled mounting hardware supports vehicle, wall, and desktop installation scenarios.
• Manufacturer-matched components preserve warranty coverage across multi-unit deployments.

Potter

SKU: PAM-1

Potter PAM-1 Multi-Voltage Relay Module

Compact relay module with 10A SPDT contacts and multi-voltage input

• 10A form-C (SPDT) contacts switch locks, solenoids, and alarm outputs without external relays.
• Multi-voltage input with diode protection guards against reverse polarity across control circuits.
• UL864-rated module ships pre-wired with 18 AWG leads and hardware for fast cabinet installation.

Potter

SKU: PAM-4

Potter PAM-4 Polarized Relay Module

Polarized relay module for access control and door strike switching

• Polarized coil rejects reverse-polarity wiring, eliminating silent mis-connection faults.
• Supports 12VDC and 24VDC control circuits for flexible panel integration.
• Isolates load circuits from control panels, protecting main relay capacity across door zones.

SDC

SKU: 100-4

SDC 100-4 12/24VDC Solenoid Coil Controller

12/24VDC solenoid controller for HID-based access control door strikes

• Accepts 12VDC or 24VDC input, eliminating separate SKUs across mixed-voltage deployments.
• Designed for HID-based credential systems, simplifying integration with existing reader infrastructure.
• Lifetime warranty reduces long-term replacement risk in high-cycle door strike installations.

SDC

SKU: 400NU-L2

SDC 400NU-L2 4-Door Access Control Annunciator

4-door annunciator with HID credentials and dual-protocol networking

• Monitors 4 doors via LED indicators on a 1¾"×4½" stainless steel faceplate.
• Accepts 12/24 VDC ±10% relay inputs; no network required, point-to-point wiring.
• Lifetime warranty; corrosion-resistant finish suits healthcare, hospitality, and marina installs.

SDC

SKU: 400NU-SN

SDC 400NU-SN 4-Door Access Control Siren Controller

4-door networked controller with 250K user capacity and OSDP/TCP/IP

• Operates on 12 or 24 VDC ±10%, compatible with standard access control power supplies.
• Dry-contact relay input integrates with any access control platform without network or protocol support.
• Compact 1¾" × 4½" stainless steel faceplate fits narrow wall spaces alongside credential readers.

SDC

SKU: 400RC433

SDC 400RC433 1-Channel Wireless Receiver Controller

1-channel wireless receiver for up to 63 doors with 250K credentials

• Controls up to 63 doors and 250,000 credentials without a central panel.
• OSDP and TCP/IP support bridges legacy prox readers into networked systems.
• Accepts DESFire, MIFARE, NFC, and 125 kHz prox—no credential format conflicts.

SDC

SKU: 400W1-433

SDC 400W1-433 4-Door Wireless Access Control Transmitter

4-door wireless access controller with 433 MHz range for multi-entry sites

• Manages 4 doors and 250,000 user profiles from a single 433 MHz controller.
• OSDP and TCP/IP communication integrates into existing security architectures without proprietary lock-in.
• HID credential compatibility lets you retain current badge stock and readers on retrofit deployments.

SDC

SKU: 422U

SDC 422U Push Button Access Control Controller

Wired push-button controller with OSDP encryption for 24VDC access systems

• OSDP encrypted reader communication eliminates unencrypted Wiegand credential exposure.
• Supports both proximity card readers and keypads for mixed-credential single-door deployments.
• Lifetime warranty on a 24VDC wired controller simplifies long-term maintenance planning.

SDC

SKU: 423PU

SDC 423PU 420 Series Exit Switch Controller

OSDP exit switch controller for NFC and keypad readers, 24VDC wired

• OSDP communication encrypts credential traffic, blocking man-in-the-middle attacks.
• Accepts both NFC/13.56 MHz proximity and keypad readers on a single 24VDC unit.
• Lifetime warranty; ships with 2-inch button, 1-gang plate, and code-compliant signage.

SDC

SKU: 480-SFB

SDC 480-SFB Square Flush Recessed Access Control Box

Square flush recessed controller for HID access control over TCP/IP

• Recesses into 4.5"–6" openings for a clean, low-profile install in walls or frames.
• Integrated battery clip maintains fail-safe or fail-secure operation during power loss.
• Weatherized construction and TCP/IP connectivity suit covered outdoor vestibule deployments.