Power Supplies for Surveillance & Access Control Systems

Plan Your Deployment

Voltage and amperage requirements for connected devices
Centralized vs distributed power architecture
Redundancy and failover considerations
Indoor vs outdoor installation requirements
Code compliance and surge protection planning

Showing Results for Power Supplies

Compare

Add to Cart The item has been added
Potter

SKU: PSN-1000E

Potter PSN-1000 Series Intelligent Notification Power Expander

Rack-mount notification expander for Potter access control systems
- Expands door strike, audible, and visual indicator output beyond base controller
- 18 AH battery capacity with AC drop-out support for continuous operation
- Modular design supports multi-building campuses and phased capacity growth
In stock · Ships same business day

$1,301.55 $965.99 Save $335.56

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 602RF

SDC 602RF 1 AMP DC Power Controller

1 AMP 24VDC controller for proximity, keypad, and NFC readers via OSDP
- OSDP protocol standard integration with proximity cards, keypads, NFC/13.56MHz
- 1 AMP output at 24VDC for single-door and multi-door access control systems
- Wired connectivity in compact 12" × 12" × 4" form factor for reader deployment
In stock · Ships same business day

$302.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 602RFA

SDC 602RFA 1 Amp Regulated Power Supply

24VDC 1-amp regulated supply for SDC multi-door access control
- Supports up to 63 doors and 250,000 users on single controller
- Compatible with DESFire, MIFARE, NFC, and 125kHz proximity credentials
- Works with OSDP and TCP/IP SDC access control systems
Special Order · Ships in 2-3 weeks

$356.99 $341.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 631RFA

SDC 631RFA 1.5 AMP 12/24VDC Power Supply

1.5A controller for up to 63 doors with 250K credential support
- Manages 63 doors across multi-building deployments with single 12/24VDC supply
- Supports DESFire, MIFARE, NFC, and 125kHz Prox readers in mixed configurations
- Integrates via OSDP and TCP/IP for standard access control platforms
Special Order · Ships in 2-3 weeks

$350.99 $335.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 631RFUR-1

SDC 631RFUR-1 1.5-Amp 24VDC Power Supply Controller

24VDC 1.5-amp power supply controller for HID access systems
- 1.5-amp rating supports single and multi-door installations
- Compact modular design fits retrofit and new construction deployments
- 24VDC operation compatible with HID credential-based access control
Special Order · Ships in 2-3 weeks

$379.99 $362.99 Save $17.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 632RF

SDC 632RF 220V 2-Amp Power Supply Controller

220V controller with 2A regulated 24VDC output for mid-scale access systems
- Powers proximity, keypad, and NFC/13.56MHz readers with stable 24VDC regulation
- OSDP protocol support isolates credential data from network traffic
- Single 2-amp supply eliminates multiple power distribution runs across entry points
In stock · Ships same business day

$335.99 $321.99 Save $14.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 632RFA

SDC 632RFA 2 Amp Class 2 Access Controller

63-door Class 2 controller with 250K credential capacity
- Manages up to 63 doors simultaneously on single 24VDC 2A output
- Stores 250,000 user credentials without splitting databases across units
- Reads DESFire, MIFARE, NFC (13.56 MHz), and 125 kHz proximity cards
In stock · Ships same business day

$652.00 $372.99 Save $279.01

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: TR24

SDC Security Door Controls TR24 Plug-in Power Supply

24VDC plug-in power supply with OSDP for networked access control
- OSDP protocol integration with proximity, keypad, and NFC/13.56MHz readers
- 24VDC output supports single and multi-door enterprise deployments
- Plug-in form factor simplifies retrofit and new-installation architectures
Special Order · Ships in 2-3 weeks

$61.99 $58.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 631RF

Sdc/Security Door Controls 631RF Controller Class 2 Output

Multi-door controller with 1.5A Class 2 output and OSDP support
- 1.5 Amp Class 2 output at 24VDC for reliable door control
- Open Supervised Device Protocol (OSDP) integration with access platforms
- NFC and 13.56MHz credential support for proximity and keypad readers
Special Order · Ships in 2-3 weeks

$294.99 $281.99 Save $13.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 636RFA

SDC/Security Door Controls 636RFA 6 Amp Lock/Strike

6 amp lock strike with OSDP support for multi-credential access control
- Field-selectable 24VDC strike integrates NFC and keypad readers in one device
- OSDP protocol support connects to centralized access control systems
- Wired connectivity with 6 amp output for standard door security installations
In stock · Ships same business day

$649.99 $621.99 Save $28.00

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: 2WAK4

Speco 2WAK4 Two-Way Audio Kit for DVR Systems

Two-way audio kit for DVR systems with ASPC20 power supply
- Bidirectional voice communication between DVR control station and remote locations
- Integrates directly into existing DVR camera infrastructure without separate wiring
- Supports facility access control, staff coordination, and live operator monitoring
Special Order · Ships in 2-3 weeks

$113.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: DDAK4

Speco DDAK4 Digital Deterrent Kit for DVR Systems

Complete power & adapter kit for DVR surveillance system deployment
- Includes ASPC20 12V DC power supply, PSDC24 cable adapter, connector
- All components factory-matched for DVR compatibility—no sourcing guesswork
- Bundled kit reduces procurement time and job-site component management
Special Order · Ships in 2-3 weeks

$184.30 $72.99 Save $111.31

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: NR4PS

Speco NR4PS DC48V Replacement Power Supply

DC 48V replacement power supply for Speco NRL-v2 and NRN recorders
- 48V at 1.25A output via 4-pin cord connector for direct recorder compatibility
- Includes power supply unit and pre-assembled 4-pin cord for field installation
- Drop-in replacement for Speco networked recorder systems requiring DC power
Special Order · Ships in 2-3 weeks

$177.80 $69.99 Save $107.81

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: NREPS

Speco NREPS 48V DC Replacement Power Supply

48V DC replacement for NRE/NRN/NRP series networked systems
- 3.75A output rated for consistent indoor security equipment power
- 4-pin cord connector integrates directly into existing architectures
- Direct replacement designed for NRE, NRN, and NRP product lines
Special Order · Ships in 2-3 weeks

$181.00 $71.99 Save $109.01

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: SP4AWETW

Speco SP4AWETW 4" Outdoor Speaker with Transformer

4" outdoor speaker with built-in 70V/25V transformer for PA systems
- Corrosion-resistant weatherproof housing rated for continuous outdoor use
- Integrated transformer eliminates external step-down components and simplifies wiring
- Swivel bracket mount allows directional positioning for perimeter and entry coverage
Special Order · Ships in 2-3 weeks

$141.50 $55.99 Save $85.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: A1P

Speco Technologies A1P Single Door Controller and Power Supply

Single-door controller with integrated power supply in compact form
- Combines access control and power distribution in one unit, reducing wiring
- Handles single-door installations in offices and small commercial spaces
- Compact integrated design minimizes component count and installation footprint
Special Order · Ships in 2-3 weeks

$877.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Amperage & Load Planning

Size your supply at 120–130% of peak load to avoid thermal shutdown and extend component life. A 24V system with five 5A devices (25A nominal) needs a 32A or 40A supply. Under-sizing is a leading cause of system failure during peak demand.

Redundancy for Life-Safety & Access Control

Single supplies fail without warning. Dual-supply designs or UPS-backed configurations ensure doors unlock and intercoms function during power anomalies. Redundancy is required by code in many jurisdictions for egress and emergency communication.

Voltage Selection & Device Compatibility

Most locks, readers, and access points run 12V or 24V; cameras vary widely. Verify every device's rated voltage before specifying. Mixing 12V and 24V systems in one cabinet requires isolated supplies or regulators to prevent cross-voltage damage.

PoE Power Budget Constraints

Standard PoE (802.3af) supplies 15.4W per port; PoE+ (802.3at) 30W; High Power (802.3bt) up to 95W. A 24-port switch can deliver only ~375W total, easily exhausted by dense camera and access-point deployments. Injectors and midspans extend capacity.

Environmental & Mounting Constraints

Outdoor cabinets and damp enclosures require sealed, conformal-coated supplies rated for temperature extremes (−20 to +70°C typical). DIN-rail mounting saves space; enclosed supplies offer better noise isolation and thermal dissipation in server rooms.

Vendor Selection & Lead Times

Brands like Honeywell, Speco Technologies, and HES dominate access-control power; Pelco and Digi International focus on surveillance and networking. Verify manufacturer support, warranty, and stock availability before design lock-in.

Technology Stack

The specs and acronyms that actually affect power supplies performance.

DC Voltage Regulation & Ripple

Quality supplies hold output within ±5% of rated voltage under load variations and input sags. Ripple (AC noise superimposed on DC output) should be <2% peak-to-peak; excessive ripple causes camera image noise and lock chatter. Look for ±5V, ±12V, ±24V stability specs in datasheets.

Current Rating & Amperage Classes

Expressed in Amps (A) at rated voltage—e.g., 24V/5A, 24V/10A, 24V/40A. Higher amperage doesn't mean faster devices; it determines how many devices can draw simultaneously. Always check individual device current draw in milliamps (mA) and sum peak totals, not averages.

Power Factor & Input Voltage Range

Industrial supplies accept 100–240V AC input (worldwide compatible) and deliver regulated DC output. Power factor >0.9 reduces heating and helps avoid utility surcharges. Check input range to ensure compatibility with generators and unclean site power.

Short-Circuit & Fuse Protection

Integral fusing (fast or slow blow) and electronic current limiting protect the supply and downstream wiring from overcurrent events. Some supplies auto-recover; others latch off and require manual reset. Verify protection mode and response time for your application.

UPS Integration & Holdup Time

Supplies with integral or stackable battery backup maintain output for 5–60 minutes during AC loss, bridging the time for graceful shutdown or backup power activation. Holdup time (hold-up capacitor reserves) is separate; typical range 10–50 ms.

PoE (Power over Ethernet) Standards

802.3af (Type 1) = 15.4W, 802.3at (Type 2/PoE+) = 30W, 802.3bt (Type 3/4, High Power) = 60–95W. Injectors and midspan splitters add PoE to non-PoE switches. Always verify endpoint compliance and total switch/injector budget vs. connected device demand.

Typical Deployment Scenarios

Small Office Access Control (Single Door)

One 12V/5A regulated supply feeds an electric strike lock, RFID reader, and request-to-exit button. Total load ~2A. A simple wall-mount supply with integral fuse handles this; add a surface-mount enclosure in humid areas. Budget: 1 supply, 1 backup fuse kit.

Mid-Size Surveillance Closet (16 IP Cameras + NVR)

A 24V/20A regulated DIN-rail supply powers four 5A PoE injectors (one per four cameras), plus the NVR's 24V auxiliary input. If cameras are all PoE-enabled and the switch is remote, injectors bridge the gap. Add a second supply for redundancy and a UPS battery module for 10-minute hold-up.

Multi-Building Campus with Distributed Access (8 Doors, 24 Cameras)

Each building requires a local 24V/10A supply (for locks, readers, intercoms) plus one or two PoE injectors per camera cluster. Cabinet-mounted DIN-rail supplies with integral breakers minimize field wiring. Specify weatherproof outdoor enclosures for exterior cabinets; trunk all power back to a central UPS for life-safety compliance.

High-Density Server & Intercom Integration

A redundant 24V/40A supply pair feeds six 24V devices (intercoms, door controllers, call stations) and distributes 12V to analog sensors via a buck regulator. Modular or multi-output supplies reduce cable clutter. Proper conduit routing and junction boxing maintain code compliance and thermal management.

Frequently Asked Questions

What size power supply do I need for my system?

Add up the current draw (in milliamps or amps) of every device connected to that supply—cameras, locks, readers, intercoms. Multiply by 1.25 (safety factor) and round up to the next standard supply size (e.g., 5A, 10A, 20A, 40A). Always verify supply and load voltage match exactly.

Can I use one power supply for mixed 12V and 24V devices?

No. Single outputs are isolated; mixing voltages risks damage. Use separate regulated supplies for each voltage, or a multi-output supply with isolated rails. If you must share a cabinet, use a buck converter (24V down to 12V) downstream of a 24V primary supply, but size the primary for total current demand.

What's the difference between a regular power supply and a UPS-backed supply?

A regular regulated supply converts AC to clean DC and stops when AC fails. A UPS-backed supply includes integral or stackable battery modules that maintain DC output for minutes after AC loss, allowing orderly shutdown or switchover to backup power. Essential for access control and emergency intercoms.

Do I need a PoE injector if my switch already has PoE?

Not necessarily, but injectors solve two common problems: (1) extending PoE to non-PoE switches, and (2) supplementing insufficient switch PoE budget. A 24-port PoE+ switch can only deliver ~375W total; dense deployments often need additional injectors per camera cluster. Plan your PoE budget carefully upfront.

What does ±5% voltage regulation mean?

The supply guarantees output stays within ±5% of rated voltage (e.g., 24V ±1.2V = 22.8–25.2V) across load and input variations. Tighter specs (±3%) cost more but reduce noise and improve camera image stability. Cameras typically tolerate ±10%; locks are pickier (±5% or better).

How do I mount a power supply in an outdoor cabinet?

Use a DIN-rail mounted supply inside an IP65-rated enclosure. Ensure the enclosure has ventilation or a thermostat fan to keep internal temperature below the supply's rating (typically 70°C max). Add a surge protector or SPD at the AC input, and run conduit from the cabinet to devices using conduit adapters and gang plates for strain relief.

Power Supplies

Plan Your Deployment

Showing Results for Power Supplies

Potter PSN-1000 Series Intelligent Notification Power Expander

SDC 602RF 1 AMP DC Power Controller

SDC 602RFA 1 Amp Regulated Power Supply

SDC 631RFA 1.5 AMP 12/24VDC Power Supply

SDC 631RFUR-1 1.5-Amp 24VDC Power Supply Controller

SDC 632RF 220V 2-Amp Power Supply Controller

SDC 632RFA 2 Amp Class 2 Access Controller

SDC Security Door Controls TR24 Plug-in Power Supply

Sdc/Security Door Controls 631RF Controller Class 2 Output

SDC/Security Door Controls 636RFA 6 Amp Lock/Strike

Speco 2WAK4 Two-Way Audio Kit for DVR Systems

Speco DDAK4 Digital Deterrent Kit for DVR Systems

Speco NR4PS DC48V Replacement Power Supply

Speco NREPS 48V DC Replacement Power Supply

Speco SP4AWETW 4" Outdoor Speaker with Transformer

Speco Technologies A1P Single Door Controller and Power Supply

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Power Supplies

Frequently Asked Questions

Related Categories

Engineering Reading