IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Comelit

SKU: DIN12

Comelit DIN12 1 Foot DIN Rail Mount

1-foot metal DIN rail with PoE+ for wall-mounted cabinet systems
- Metal construction rated IP30 for indoor telecom and security installations
- PoE+ (802.3at) power delivery supports compatible Comelit modules
- Standardized DIN rail mount enables modular, expandable system builds
Special Order · Ships in 2-3 weeks

$6.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: EZ-316MUG

Comelit EZ-316MUG Rack Mount Kit

Rack-mount control assembly for Comelit EZ access systems
- Includes 316 Touch VIP module with dual component support units
- Complete power supply bundled for integrated installation
- White housing mounts in standard 3U rack configuration
In stock · Ships same business day

$7,510.00 $5,263.99 Save $2,246.01

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: KVU8507

Comelit KVU8507 Surface Mount Single Family Ultra Kit VIP

4MP surface-mount intercom kit with PoE+ and 850nm IR night vision
- 4MP resolution with 850nm infrared night vision for clear day/night identification
- PoE+ (802.3at) powered—no dedicated power wiring needed for retrofit or new builds
- Complete single-family kit includes wall housing, 7" Wi-Fi monitor, and audio/video module
Special Order · Ships in 2-3 weeks

$1,253.99 $1,199.99 Save $54.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: KVU8508

Comelit KVU8508 Surface Mount Video Intercom Kit 4MP PoE+

4MP surface-mount video intercom with PoE+ and built-in IR night vision
- 4MP resolution captures facial detail and license plates at typical entry distances
- PoE+ (802.3at) power over single Ethernet cable eliminates separate power supply
- 850nm infrared illumination with 3–5m range for round-the-clock monitoring
In stock · Ships same business day

$673.99 $644.99 Save $29.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: KVU8571

Comelit KVU8571 Surface-Mount Single-Family Video Intercom Kit

4MP surface-mount video intercom kit, PoE+ powered, no recessed install
- 4MP resolution (2560×1920) for clear facial detail and visitor ID reading
- PoE+ power over single CAT5e/CAT6 cable eliminates separate power runs
- 7-inch touchscreen monitor mounts flush to wall or doorframe in minutes
In stock · Ships same business day

$707.99 $676.99 Save $31.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: KVU8572

Comelit KVU8572 Surface-Mount Single-Family Ultra Kit

Surface-mount 4MP intercom kit with 7" display and PoE+ power
- 4MP resolution (2560×1440) captures facial detail for visitor ID
- 7" integrated touchscreen with Wi-Fi connectivity, no recessed mounting
- Single PoE+ cable powers unit and audio/video module up to 30W
In stock · Ships same business day

$1,142.21 $747.99 Save $394.22

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: KVV8111

Comelit KVV8111 Visto VIP Kit with Power Supply

4MP Visto VIP kit with integrated PoE+ power supply
- 4MP resolution over PoE+ (802.3at) networked installation
- Complete kit includes KVV8111 unit and power supply
- Integrates with Comelit Visto VIP ecosystem deployments
Special Order · Ships in 2-3 weeks

$536.99 $513.99 Save $23.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: PSU50-001

Comelit PSU50-001 12V Power Supply Unit

12V 50W regulated power supply for Comelit intercoms and access control
- 50W @ 12V DC, 3.6A output for continuous auxiliary power in security systems
- AC/DC conversion with regulated output for stable operation in control cabinets
- DIN rail mount fits standard electrical enclosures for organized installations
Special Order · Ships in 2-3 weeks

$244.99 $234.99 Save $10.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: PSU50-002

Comelit PSU50-002 12/24V Power Supply 3.6A/1.8A

Dual-voltage rack PSU for Comelit access control, 12V/24V selectable
- 12V @ 3.6A or 24V @ 1.8A output for mixed-voltage system setups
- 19-inch rack mount form factor fits standard telecom/security cabinets
- Universal AC input with regulated DC for access panels and door locks
Special Order · Ships in 2-3 weeks

$257.99 $246.99 Save $11.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: UMA1S

Comelit UMA1S Audio Panel Surface Mount

Surface-mount audio panel for Comelit IP intercom access control
- Audio-only design with 2MP resolution for visitor verification
- Surface mount installation—no structural changes needed indoors
- Integrates with Comelit IP intercom systems for building entry points
Special Order · Ships in 2-3 weeks

$586.99 $560.99 Save $26.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: UMATS-IP

Comelit UMATS-IP Ultra Touch Audio Only Surface Mount

IP audio intercom with flexible surface mounting for networked systems
- Audio-only communication over IP networks for entry and common areas
- Surface mount design fits wall, pendant, or rack installations
- Compatible with IP-based intercom and access control systems
Special Order · Ships in 2-3 weeks

$2,183.99 $2,088.99 Save $95.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: UMVDS-IP

Comelit UMVDS-IP 2MP Surface Mount Video Intercom

IP surface mount video intercom with 2MP clarity and two-way audio
- 2MP resolution (1920×1080) for clear facial identification at entry points
- Surface mount design eliminates recessing, speeds retrofit installation on existing walls
- ONVIF compatible integration with standard network video management systems
In stock · Ships same business day

$1,647.99 $1,575.99 Save $72.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: UT1090S

Comelit UT1090S Surface Mount Ultra Touch Display

4MP wall-mounted touch display with PoE+ power for Comelit systems
- 4MP resolution with integrated microphone for two-way audio communication
- PoE+ (802.3at) power eliminates separate electrical runs during installation
- Ultra touch interface works with Comelit and ONVIF-compatible security platforms
Special Order · Ships in 2-3 weeks

$2,711.99 $2,593.99 Save $118.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: UT8090S

Comelit UT8090S Surface Mount Ultra Touch VIP

4MP surface-mount touch display for Comelit VIP access control
- 4MP resolution with integrated microphone for two-way audio at entry
- PoE+ powered—no dedicated power runs required for installation
- Wall-mounted ultra touch interface integrates into Comelit access systems
Special Order · Ships in 2-3 weeks

$2,585.99 $2,473.99 Save $112.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: UT9161

Comelit UT9161 1 Module Flush-Mount Frame

Flush-mount 1-module frame for Comelit 4MP cameras with PoE+
- Sits flush to wall surface, no protruding housing for clean aesthetics
- PoE+ (802.3at) power up to 30W eliminates separate power wiring
- Single-module design keeps footprint compact in confined wall cavities
In stock · Ships same business day

$137.99

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: UT9161B

Comelit UT9161B Flush-Mounted Frame 1 Ultra Module

Flush-mounted 4MP frame for Comelit ultra modules with PoE+
- 4MP resolution in recessed wall installation for clean integrated look
- PoE+ (802.3at) power eliminates separate wiring runs
- Fits standard electrical boxes for access control and intercom use
Special Order · Ships in 2-3 weeks

$112.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Comelit DIN12 1 Foot DIN Rail Mount

Comelit EZ-316MUG Rack Mount Kit

Comelit KVU8507 Surface Mount Single Family Ultra Kit VIP

Comelit KVU8508 Surface Mount Video Intercom Kit 4MP PoE+

Comelit KVU8571 Surface-Mount Single-Family Video Intercom Kit

Comelit KVU8572 Surface-Mount Single-Family Ultra Kit

Comelit KVV8111 Visto VIP Kit with Power Supply

Comelit PSU50-001 12V Power Supply Unit

Comelit PSU50-002 12/24V Power Supply 3.6A/1.8A

Comelit UMA1S Audio Panel Surface Mount

Comelit UMATS-IP Ultra Touch Audio Only Surface Mount

Comelit UMVDS-IP 2MP Surface Mount Video Intercom

Comelit UT1090S Surface Mount Ultra Touch Display

Comelit UT8090S Surface Mount Ultra Touch VIP

Comelit UT9161 1 Module Flush-Mount Frame

Comelit UT9161B Flush-Mounted Frame 1 Ultra Module

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading