Comelit UT9161 1 Module Flush-Mount Frame
Overview
The Comelit UT9161 is a single-module flush-mount accessory frame designed to integrate modular video modules into wall-mounted installations. Unlike traditional surface-mounted housings, the UT9161 sits flush with the wall surface—a critical advantage when aesthetics matter or when space behind the wall is constrained. This frame is purpose-built for Comelit modular camera systems and accepts 4MP-class modules powered via PoE+ (802.3at), eliminating the need for dedicated power wiring at the installation point.
Key Features
- Flush-Mount Design: Mounts directly to wall surface without protruding housing, preserving clean interior aesthetics and reducing snag points in tight spaces such as narrow hallways, recessed ceilings, or retrofit installations where surface conduit is undesirable.
- PoE+ Power Delivery: Supports IEEE 802.3at (PoE+) power standard, allowing the frame to source up to 30W to the mounted module. This eliminates the need for local 12VDC transformers or AC outlets—a significant cost and labor reduction on new builds and retrofits, especially when the NVR or PoE switch is at distance.
- Single-Module Capacity: Engineered for one module only; multi-module setups require separate UT9162 (2-module) or equivalent multi-module frames. This constraint is intentional—it keeps the footprint compact and limits cable-routing complexity in confined wall cavities.
- 4MP Module Compatibility: Accepts Comelit modular video modules rated for 4MP resolution (roughly 2560×1920 pixel output). At this resolution, a single camera covers approximately 15–20 feet of linear wall space at face-recognition quality, making it suitable for entry doors, corridor monitoring, and retail counter applications.
- Modular Ecosystem Integration: The UT9161 is part of Comelit's modular IP camera architecture, meaning modules can be swapped, upgraded, or reconfigured without replacing the frame. If a module fails or needs a higher-resolution upgrade, you replace the module—not the entire assembly.
- Standardized RJ-45 Termination: Incoming PoE+ cabling connects via standard RJ-45 connector, allowing any qualified technician to wire the frame using existing network infrastructure and patch-panel methodologies. No proprietary connectors means faster provisioning and lower spare-parts overhead.
Integration & Compatibility
The UT9161 is compatible with any network video recorder (NVR) or PoE+ managed switch that supports ONVIF-compliant cameras. Comelit modules operate as standard IP endpoints, so integrators can deploy them into existing Milestone XProtect, Axis Camera Station, or vendor-neutral VMS platforms without driver customization. The flush-mount form factor is best suited for integration into wall cavities with at least 2 inches of depth—verify cavity dimensions before ordering.
When to Choose a Different Model
If your installation requires two or more modules in close proximity (e.g., dual coverage of a wide entrance), the Comelit 2-module flush-mount variant delivers better cable consolidation. For outdoor applications subject to rain, wind, or temperature extremes, a weatherproof surface-mount enclosure rated IP67 is the better choice. If you need wireless (non-PoE) power, this frame is not suitable.
Typical Deployment Scenarios
Residential and small-commercial environments where a single entry camera must blend into finished walls—apartment lobbies, small retail storefronts, office reception areas, and residential front-door installations. The UT9161's compact profile makes it a natural fit for renovations where running new conduit is impractical.
Frequently Asked Questions
Q: Can I mount the UT9161 outdoors?
A: No. The UT9161 lacks an outdoor enclosure rating and is designed for interior, climate-controlled wall mounting only. Moisture ingress will damage the module and frame connector. For outdoor applications, use a weatherproof surface-mount enclosure.
Q: What is the maximum cable run from the PoE+ switch to the UT9161?
A: Standard Ethernet maximum is 100 meters (328 feet) per IEEE 802.3. Practical deployments rarely exceed 50–75 meters to maintain voltage stability under load. Beyond that, active PoE injectors or midspan devices may be needed.
Q: Can I upgrade the 4MP module to higher resolution later?
A: Yes, if Comelit offers a compatible higher-resolution module for this frame form factor. The frame itself supports the mechanical interface; check with the manufacturer or your integrator for module compatibility before purchase.
Q: Is the UT9161 suitable for gang-box (multi-gang outlet) installations?
A: Single modules fit standard single-gang cavities (nominal 2.25 inches wide). Verify your outlet box depth—flush mounting typically requires 2+ inches behind the finished wall surface.
Q: What certifications does the UT9161 carry?
A: Certification data is not available in the current product documentation. Consult the manufacturer datasheet or your distributor for CE, UL, or regional compliance details.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Comelit UT9161 is a frame, not a camera, but its role in modular deployments is often underestimated. The flush-mount design eliminates a visibility and vandalism vector that surface-mounted housings create—and in residential or hospitality settings, that matters. The PoE+ (802.3at) power envelope supports 30W maximum, which is adequate for 4MP modules but leaves little headroom for add-ons like illuminators or heaters. Ensure your switch has sufficient PoE budget before committing to a large rollout.
Technical Highlights:
- PoE+ (802.3at) Support: Delivers up to 30W per frame—sufficient for most 4MP modules (typically 8–15W), but no margin for concurrent heated housings or IR illuminators on the same port. Verify module power specs before deploying in cold environments.
- Single-Module Constraint: Simplifies wiring and reduces cable clutter in wall cavities, but forces integrators to use separate frames for side-by-side or multi-angle coverage. Two UT9161 frames cost more than a 2-module variant, so consider future expansion before finalizing cavity layouts.
- Flush-Mount Footprint: Eliminates protruding housings, cutting installation labor in retrofit scenarios and reducing aesthetic objections from facility managers. The tradeoff: cable management must be planned during rough-in—post-installation reconfiguration is difficult.
Deployment Considerations:
- Requires wall cavity depth of at least 2 inches behind finished surface; verify before drilling. Shallow cavities (e.g., tile walls, concrete block with thin facing) may not accommodate the frame.
- PoE+ switch port saturation is real—a single 24-port PoE+ switch can support approximately 14–16 UT9161 frames at full 30W each (depending on switch architecture). Oversizing the switch by 30–40% is prudent for growth and failover redundancy.
Best suited for residential security retrofits, small retail environments, and hospitality properties where a single monitored entry or hallway camera must integrate seamlessly into finished walls. The modular design provides future flexibility without frame replacement, a genuine operational advantage in long-term deployments.
