Comelit PSU50-002 Dual-Voltage Rack-Mount Power Supply
Overview
The Comelit PSU50-002 is a 12/24V switching power supply rated at 3.6A (12V output) or 1.8A (24V output) — a standard-duty feed for access control panels, door strike locks, and auxiliary security equipment in cabinet-mounted installations. The PSU50-002 delivers regulated DC power in a compact 19-inch rack form factor, allowing flexible voltage selection at the time of installation to match whatever door hardware or control logic your system requires. Deploy this where you need clean, continuous power to Comelit access architectures in central stations, equipment rooms, or distributed security closets.
Compatibility
The PSU50-002 integrates with standard Comelit access control system families and cabinet infrastructure designed for 19-inch rack mounting. Confirm compatibility with your specific Comelit panel or door controller (voltage requirement and current draw) before ordering — the dual-voltage design means you select 12V or 24V output at installation, and total load must not exceed the rated amperage (3.6A @ 12V, 1.8A @ 24V). This supply is sized for control-level loads, not for high-draw strike locks or multiple readers on a single supply; if your door control array exceeds the current budget, stage multiple supplies or use a higher-capacity unit.
Installation Notes
Mount the PSU50-002 into a standard 19-inch equipment rack in a climate-controlled equipment room. Verify input voltage availability and wiring gauge for the load you are powering — undersized wire to a remote strike or reader will cause voltage sag and erratic behavior. Connect output terminals to the access control panel input according to the Comelit wiring diagram for your panel model. Keep the power supply away from water splash and direct moisture; it is designed for indoor telecom/security cabinet environments only.
What's in the Box
- 1x Comelit PSU50-002 power supply unit
