IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Axis

SKU: 01165-001

Axis T91B47 Stainless Steel Pole Mount 50–150mm - 01165-001

Stainless steel pole mount for 50–150mm diameter supports, indoor/outdoor
- 570mm stainless steel straps distribute load evenly and resist corrosion
- TX30 screw interface connects directly to Axis camera mounting points
- Single mount accommodates poles 2–6 inches in diameter across installations
In stock · Ships same business day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-120HMW

Hanwha SBP-120HMW Cap Adaptor White

Aluminum-core mounting adaptor for 13+ Hanwha dome cameras
- Aluminum core with plastic cap, ø135 x 65mm, weighs 230g for stable ceiling mount
- Fits QNV-C, QND, and LND series cameras with precision tolerances—no shimming required
- RAL9003 white finish blends seamlessly into indoor ceilings and wall trim
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-171

Axis T94F01S Mount Bracket for Compact Cameras - 5505-171

Precision wall and ceiling bracket for compact Axis dome cameras
- Compatible with M3006-V, M3007-P/PV, M3024-LVE, M3025-VE, M3026-VE
- Professional-grade construction with straightforward fastener installation
- IP68-rated white bracket eliminates mounting flex and camera drift
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01567-001

Axis M3057-PLVE Clear Dome Replacement 4-Pack - 01567-001

Clear dome 4-pack for M3057/58-PLVE cameras with anti-scratch coating
- Anti-scratch hard coating resists UV and cleaning wear over months outdoors
- IP66-rated rubber gaskets seal against moisture and dust in harsh environments
- Pre-installed gaskets and precision fit drop into M3057/58-PLVE housings instantly
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02553-001

Axis T6101 Mk II Audio I/O Interface - 02553-001

Audio and I/O interface for Axis cameras with two-way audio
- One audio input and output with 3.5 mm terminal block for microphones and speakers
- One alarm input and output relay for sensor and control integration
- Powers via camera output or external PoE for flexible deployment
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02464-021

Axis TU6001 3-Pin 3.81mm Connector 10-Pack - 02464-021

3-pin 3.81mm connectors for Axis F91 2nd Gen mobile surveillance
- 10-pack of screw-clamp connectors; no crimper required for installation
- Carries DC power plus shutdown signal to prevent battery drain when idle
- IP65-rated connectors for vehicle-mounted F91 fleet deployments
In stock · Ships same business day

$11.33 $10.99 Save $0.34

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-CW7CN

i-PRO WV-CW7CN ClearSight Coating Clear Dome Cover

Clear dome cover with anti-glare coating for high-glare retail and office
- ClearSight coating reduces reflections and glare in bright indoor spaces
- Passive operation—no power, configuration, or maintenance required
- Direct replacement for i-PRO dome cameras; maintains full optical clarity
In stock · Ships same business day

$126.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-731

Axis 5505-731 DIN Rail 25W Power Supply

12V/2.1A DIN rail supply for distributed Axis camera and NVR systems
- 25W output powers multiple compact cameras or mid-range NVRs without PoE
- 35mm DIN rail mount fits standard cabinets; minimal depth, ready to install
- Wide AC input range operates globally without step-down converters
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5801-421

Axis 5801-421 J-Box/Gang Box Mounting Plate

J-box/gang box adapter for M3044/M3045/M3046 compact domes
- Mounts to 4" square, 4" octagon, single-gang, or double-gang boxes
- Eliminates need for new conduit runs or wall drilling on retrofits
- Direct electrical box mounting with no separate anchors required
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-941

Axis M20 Gasket C Replacement 10 pcs - 5505-941

Gasket C seals for Axis M20 cameras—10-pack replacement set
- Gasket C profile matches M20 connector geometry for moisture and dust sealing
- 10 pieces per pack lets you maintain multiple installations without reordering
- Tool-free installation—swap old gasket for new in seconds per connector
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-122HM

Hanwha SBP-122HM Aluminum Hanging Mount

Aluminum hanging mount for 13+ Hanwha QND/QNV/XNV cameras
- Lightweight aluminum construction reduces ceiling load across multi-camera deployments
- Pendant form factor suspends camera vertically, minimizing wall space and obstruction
- Compatible with QND-7080R, QNV-7030R, XNV-8040R and 10+ additional Hanwha models
In stock · Ships same business day

$34.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5800-121

Axis M50 Ceiling Mount Kit - 5800-121

Ceiling mount for AXIS M5054, M5055, M5056 PTZ cameras
- Compatible with hard ceiling and drop ceiling installations
- Professional-grade construction for stable camera positioning
- Official Axis accessory designed for M50-series PTZ deployment
Special Order · Ships in 2-3 weeks

$17.52 $16.99 Save $0.53

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5506-181

Axis P56 Ceiling Mount Bracket - 5506-181

Ceiling bracket sized for Axis P56 compact dome cameras
- Precision P56 mounting footprint with M6/M8 anchors for flush ceiling installation
- Organized cable routing through ceiling voids keeps runs concealed and professional
- Rigid construction handles repeated repositioning without bracket flex or drift
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02655-001

Axis Q6100-E Solo Installation Kit - 02655-001

IP66/IP67 weatherproof RJ45 connector kit for Axis Q6100-E solo setups
- IP66/IP67-rated push-pull connector handles jet spray and brief submersion
- Thermoplastic cover lid protects from UV degradation in outdoor installations
- Complete kit includes connector, plug, cover lid, and installation guide
In stock · Ships same business day

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02363-001

Axis F7225-RE Pinhole Sensor Module - 02363-001

Covert pinhole sensor with 97° view and IP66 rating for tight spaces
- 1080p @ 30 fps or 720p @ 60 fps; runs up to 30m on single cable
- 97° horizontal field of view fits ATM fascias and machinery enclosures
- IP66-rated for dust and water jets in damp or uncontrolled environments
In stock · Ships same business day

$293.80 $284.99 Save $8.81

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5700-811

Axis Q603X Dome Cover Kit - 5700-811

Replacement dome kit for Q603X PTZ cameras with clear and smoked options
- Dual bubble configuration—clear for max light, smoked for glare reduction
- HD-optimized optics maintain image clarity through impact-resistant domes
- Works indoors and outdoors; durable construction handles field deployment
Special Order · Ships in 2-3 weeks

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis T91B47 Stainless Steel Pole Mount 50–150mm - 01165-001

Hanwha SBP-120HMW Cap Adaptor White

Axis T94F01S Mount Bracket for Compact Cameras - 5505-171

Axis M3057-PLVE Clear Dome Replacement 4-Pack - 01567-001

Axis T6101 Mk II Audio I/O Interface - 02553-001

Axis TU6001 3-Pin 3.81mm Connector 10-Pack - 02464-021

i-PRO WV-CW7CN ClearSight Coating Clear Dome Cover

Axis 5505-731 DIN Rail 25W Power Supply

Axis 5801-421 J-Box/Gang Box Mounting Plate

Axis M20 Gasket C Replacement 10 pcs - 5505-941

Hanwha SBP-122HM Aluminum Hanging Mount

Axis M50 Ceiling Mount Kit - 5800-121

Axis P56 Ceiling Mount Bracket - 5506-181

Axis Q6100-E Solo Installation Kit - 02655-001

Axis F7225-RE Pinhole Sensor Module - 02363-001

Axis Q603X Dome Cover Kit - 5700-811

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading