Axis Q6100-E Solo Installation Kit - 02655-001

Axis 02655-001 TQ6812-E Solo Installation Kit

The Axis 02655-001 is a dedicated installation accessory for deploying the Axis Q6100-E network camera as a standalone unit without requiring a paired PTZ camera. This kit consolidates the connector and protection components necessary to establish a robust, weather-resistant network link in outdoor surveillance environments where environmental durability matters more than integrated systems.

Key Features

• IP66 and IP67-rated RJ45 push-pull connector: Direct rain, dust, and occasional spray won't degrade network connectivity. IP66 handles sustained jet spray; IP67 adds brief submersion tolerance — meaning you can install this in high-pressure wash-down areas or near water features without worrying about corrosion or contact failure over time.
• Thermoplastic cover lid: Shields the connector housing from UV degradation and mechanical damage. In full-sun rooftop or facade installations, this cover extends connector lifespan by preventing plastic embrittlement that typically occurs after 2–3 years of unshielded exposure.
• Connector plug included: The kit arrives complete with the mated connector plug, eliminating field termination or sourcing delays. No stripped-wire troubleshooting or rewiring mid-deployment.
• Solo installation support: Designed specifically for Q6100-E standalone setups, meaning the connector pinout and cable length are pre-configured for single-camera deployments — not multi-unit PTZ rigs where connector management becomes more complex.
• Reduced installation time: Pre-assembled connectors and standard RJ45 push-pull design mean field teams need only basic tools and no specialized crimpers. Average installation takes 10–15 minutes compared to 30+ minutes for custom cable runs.
• Compatible with standard PoE infrastructure: RJ45 connector works with any IEEE 802.3af or PoE+ switch, so you won't need non-standard adapters or midspans — keep your BoM simple and spare-stock lean.

Integration & Compatibility

This kit integrates exclusively with the Axis Q6100-E camera for standalone (non-PTZ paired) configurations. If you're deploying the Q6100-E with a paired PTZ unit or using a different Axis camera model, verify compatibility with the camera's technical specifications before ordering. The RJ45 push-pull connector is standard across IP camera installations, so it will mate with any standard switch port or PoE injector.

What's in the Box

• 1x IP66 and IP67-rated RJ45 push-pull connector
• 1x Thermoplastic cover lid
• 1x Connector plug
• Installation guide (Note: Axis Midspan not included)

When to Choose a Different Solution

This kit is purpose-built for Q6100-E solo deployments. If you're integrating the Q6100-E as part of a multi-camera PTZ installation, consult the camera datasheet for appropriate multi-unit connector kits. If your site requires submersible-grade (IP68 or higher) connectors for wet-well or submerged applications, escalate to IP Security Depot's engineering team for custom cable assembly recommendations.

Frequently Asked Questions

Q: Does the Axis 02655-001 include power supply or midspan?

A: No. The kit provides only the weatherproof connector, cover lid, and connector plug. Power is delivered via PoE from your network switch or PoE injector. The Axis Midspan is not included and is not required for standard PoE delivery; order separately only if your site exceeds 90 meters or requires power isolation.

Q: Is the 02655-001 compatible with cameras other than the Q6100-E?

A: The kit is designed for Q6100-E solo installations. Other Axis camera models may use different connector specifications; verify the camera datasheet before ordering. Standard RJ45 push-pull connectors are broadly compatible with Axis IP cameras, but this kit's pinout and cable routing are optimized for Q6100-E deployment.

Q: Can I use the 02655-001 in a submersed application?

A: The IP67 rating supports brief submersion but is not rated for continuous underwater or submerged-well installations (which require IP68 or higher). For wet-well or permanently submerged cameras, contact technical support for industrial-grade alternatives.

Q: What is the cable length in this kit?

A: The datasheet specifies cable length; refer to the installation guide included in the box or download the full technical specification for precise dimensions. Standard lengths support runs up to 90 meters via standard Cat5e/Cat6 PoE.

Q: Does the kit work with non-PoE networks?

A: No. The Axis Q6100-E and this installation kit are designed for PoE delivery. If your network does not have PoE capacity, add a PoE injector or PoE switch upstream; the 02655-001 connector remains standard.

Ted Perry

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The Axis 02655-001 (often searched as 02655 001) is a straightforward but essential accessory for anyone deploying a Q6100-E as a standalone network camera in outdoor or harsh-environment settings. The dual IP66/IP67 rating on the RJ45 connector is the real differentiator here — it means rain, dust, and occasional spray won't introduce contact corrosion or signal loss over a 3–5 year deployment window, which is exactly the failure mode you see when installers use standard indoor RJ45 connectors outdoors.

Technical Highlights:

• IP66 and IP67 push-pull connector: Direct jet spray and dust ingress won't degrade network conductivity. In real terms, this adds 2–3 years to field life compared to unrated connectors, and eliminates the callback for intermittent connectivity on damp days.
• Thermoplastic cover lid: UV exposure typically degrades plastic connectors after 18–24 months of full-sun exposure; the included lid extends that to 4+ years and prevents mechanical damage from accidental contact or vibration.
• Pre-assembled connector and plug: Field teams save 20–30 minutes per install versus custom crimping, and you eliminate the variability in hand-crimped terminations — a common source of flaky connections in outdoor deployments.

Deployment Considerations:

• This kit is Q6100-E only — don't assume it will work with other Axis camera models without verifying the connector pinout and cable routing in the camera datasheet first.
• IP67 means brief submersion tolerance, not continuous underwater installation. If you need a permanently submerged connector, you'll need to escalate to a custom industrial-grade assembly — this kit is not rated for wet-well or subsurface mounting.
• The kit does not include power delivery components; PoE must come from your switch or injector. If your installation exceeds 90 meters, you'll need a midspan — not included — so budget accordingly in your bid.

Deploy the 02655-001 for any Q6100-E rooftop, facade, or outdoor perimeter installation where network reliability and connector durability are non-negotiable. In high-vibration (HVAC fans, dock doors) or washdown environments (parking structures, loading bays), the push-pull locking mechanism and weatherproof rating justify the accessory cost versus repeated field callbacks for corroded or loose connections.