Axis 02363-001 F7225-RE Pinhole Sensor
The Axis 02363-001 is a second-generation modular pinhole sensor designed for covert surveillance in confined or sensitive spaces. Unlike fixed-installation cameras, this sensor pairs with Axis F Series main units to deliver video streams over a single cable run up to 30 meters (98 feet), simplifying wiring in retrofits where running multiple dedicated camera cables is impractical or aesthetically undesirable. The 97° horizontal field of view and IP66 environmental rating make it suitable for deployment behind ATM fascias, within machinery enclosures, or in tight perimeter positions where a conventional camera body would be visible or impossible to fit.
Key Features
- IP66 / IP67 Environmental Rating: Protects the sensor from direct water jets and dust ingress — meaning you can deploy it in damp machinery rooms, exterior kiosks, or uncontrolled indoor environments without additional weatherproof housings. Note that IP67 (full immersion resistance) is not claimed here, so avoid direct submersion applications.
- 97° Horizontal Field of View: Wider than most fixed pinhole sensors, providing adequate coverage for ATM fronts, machinery monitoring, or narrow corridor surveillance without the need for pan-tilt adjustment.
- Forensic WDR (Wide Dynamic Range): Corrects for extreme lighting asymmetry — image areas that would normally wash out (reflections off glass, ATM screen glare) or disappear into shadow are recovered during playback and forensic review. Critical in high-contrast scenes like backlit ATMs or mixed indoor/outdoor entrances.
- Multi-Resolution and Frame-Rate Options: Supports up to 4× 1080p streams at 30 fps, or 720p at 60 fps, allowing you to balance storage cost (1080p consumes less storage than 4K) against frame rate. When paired with an Axis F91 main unit, 1080p streams run at 60 fps or 720p at up to 180 fps — useful for detecting tampering attempts or capturing fast-moving objects in confined spaces.
- Extended Cable Run (30 meters / 98 feet): Axis F Series architecture centralizes power and encoding at the main unit, so a single shielded cable carries both power and video data back to the recorder. This eliminates the need for PoE injectors at the sensor itself and simplifies installations where the camera position is remote from the nearest network outlet.
- Operating Temperature Range -40°C to 55°C (-40°F to 131°F): Broad range handles cold-storage facilities, exterior kiosks, and unheated mechanical rooms without thermal cycling risk or condensation damage to the sensor optics.
- F Series Ecosystem Compatibility: 02363-001 is designed exclusively for 2nd generation Axis F Series main units and approved cables. Verify your main unit generation before ordering — 1st generation F Series units are not compatible.
Integration & Compatibility
This pinhole sensor does not operate standalone; it requires a compatible Axis F Series 2nd generation main unit (such as the F91 or F32 video servers) and an Axis-approved interconnect cable. The modular architecture means you can install multiple sensors on a single main unit, distributing them across a facility via cable runs up to 30 meters each. This design is particularly valuable in retrofit scenarios — ATM networks, casino cage entrances, or warehouse machinery zones where running parallel Ethernet and power drops would be costly or disruptive.
Confirm main unit software supports the 02363-001 before deployment; firmware updates may be required for full feature access. Check with your integrator or the main unit documentation for supported video analytics, codec options (H.264 / H.265 / MJPEG), and VMS integration (ONVIF Profile S/T/G compatibility is inherited from the main unit).
What's in the Box
- Axis F7225-RE Pinhole Sensor (Model 02363-001)
- Installation Guide
- Axis F8202 Straight Mounting Bracket
When to Choose a Different Model
If your deployment requires IP67 full-submersion rating, look for higher-rated Axis F Series sensor variants or consider a sealed dome camera. If cable runs exceed 30 meters or you need true standalone operation, standard PoE IP cameras may be more practical. For high-megapixel applications (above 5MP), the pinhole form factor becomes less practical; evaluate larger sensor models instead. If you require motorized zoom or PTZ functionality, this sensor is not an option — it is fixed-optics only.
Frequently Asked Questions
Q: Is the Axis 02363-001 compatible with 1st generation Axis F Series main units?
A: No. The 02363-001 is designed exclusively for 2nd generation Axis F Series main units (F91, F32, and similar 2nd gen models). 1st generation main units are not compatible. Verify your hardware before purchase.
Q: Can I use the 02363-001 in a fully submerged or permanently wet environment?
A: The sensor is IP66 rated, which handles direct water jets and dust. IP67 (temporary submersion) and IP68 (continuous submersion) are not specified. For fully submerged or permanently flooded applications, consult your main unit and sensor manufacturer for alternative sealed options.
Q: What is the maximum cable length between the sensor and the main unit?
A: 30 meters (98 feet) using approved Axis F Series interconnect cables. Beyond 30 meters, signal integrity and power delivery degrade. If you need longer runs, consider intermediate main units or standard PoE cameras with network infrastructure.
Q: Does the 02363-001 support on-camera analytics or edge AI?
A: Analytics and AI processing are handled by the main unit and downstream video management system (VMS), not by the sensor itself. The 02363-001 captures raw video; intelligence is applied at the recording or application layer. Check your main unit and VMS for available analytic modules.
Q: Can the Forensic WDR feature be disabled if I don't need it?
A: WDR behavior is configured at the main unit level. Consult your F Series main unit documentation and web interface for WDR enable/disable controls and strength adjustment.
Q: What mounting options are included, and can I use third-party brackets?
A: The package includes the Axis F8202 straight mounting bracket. Third-party brackets may physically fit, but Axis does not guarantee optical or mechanical alignment. Use Axis-approved brackets and mounts to ensure proper sensor orientation and field-of-view alignment.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The Axis 02363-001 is a compact modular sensor that solves a specific integration problem: how to deploy discreet surveillance in spaces where conventional camera bodies won't fit or would be immediately visible. If you are working with ATM networks, casino cage installations, or warehouse machinery monitoring, the 02363-001 eliminates the need to run parallel PoE and data cables — the single interconnect cable back to an Axis F Series main unit handles both power and video, reducing installation labor and cable congestion.
Technical Highlights:
- IP66 Enclosure + Forensic WDR: Combined, these ensure usable forensic stills from high-contrast scenes (backlit ATM screens, reflective glass, mixed lighting) and survivability in damp or dusty environments without additional weatherproof housings — a real cost savings on accessory brackets and protective covers.
- 30-Meter Cable Run with Centralized Encoding: Unlike standalone PoE cameras, the 02363-001 offloads encoding and power distribution to the main unit. This means you avoid PoE budget strain on your switch for remote sensors and simplify cabling in retrofit scenarios where network infrastructure is distant from the sensor location.
- Multi-Resolution at up to 60 fps (1080p) or 180 fps (720p): The ability to adjust frame rate per stream allows you to dial in storage consumption (30 fps 1080p uses significantly less disk than 60 fps) while retaining high-speed capture for critical moments. Forensic reviewers and loss-prevention teams will appreciate the frame-rate flexibility for incident analysis.
Deployment Considerations:
- Main Unit Dependency: This sensor cannot function without a compatible 2nd generation Axis F Series main unit. Verify your existing or planned main unit hardware before committing to 02363-001 deployments — mixing generations will result in non-functional sensors.
- Cable Limit is Hard: The 30-meter maximum cable run is a physical limitation of the interconnect standard. If your ATM, machinery sensor, or facility perimeter point is farther than 30 meters from the main unit, you will either need an intermediate main unit or switch to standard PoE infrastructure — plan cable routing and main unit placement carefully in large retrofits.
- IP67 Submersion Not Supported: If you are monitoring outdoor pump stations, submerged warning lights, or fully flooded storage areas, the IP66 rating is insufficient. You will need sealed alternatives or post-submersion drying procedures.
Deploy the 02363-001 in retail loss-prevention networks (ATM canopies, back-office cages), warehouse machinery zones (conveyor monitoring, equipment guards), or casino vault entrances where discreet optics and minimal visible cabling are non-negotiable. If your deployment sits between tight spaces and multiple sensors per facility, the modular F Series architecture will save you integration time and hardware cost compared to running parallel standalone PoE cameras.
