IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
STI

SKU: KIT-REV80

STI KIT-REV80 EnviroArmour Polycarbonate Breather Vent

Polycarbonate breather vent for 9VDC HID strike systems in outdoor conditions
- Passive moisture management protects electronics in high-humidity and outdoor installations
- Direct enclosure mount requires no modification to existing STI lock/strike assemblies
- Polycarbonate construction rated for environmental exposure and temperature fluctuation
Special Order · Ships in 2-3 weeks

$29.87 $18.99 Save $10.88

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: KL544

STI KL544 Key Lock for Metal Cabinets

Mechanical key lock for STI-EM metal cabinets, 9VDC operation
- Key-based access with no electronics, batteries, or network dependency
- 9VDC low-voltage design eliminates mains power and complex wiring
- Direct integration into STI cabinet doors without modification or gaps
In stock · Ships same business day

$12.22 $8.99 Save $3.23

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7533MED

STI MED Protective Cabinet - Polycarbonate with Wire Rack, Siren Al...

Polycarbonate protective cabinet with siren alarm for medical facilities
- Polycarbonate construction with integrated wire rack for organized mounting
- 9VDC siren alarm function for integrated audible alerting capability
- Wall and panel mountable enclosure for access control equipment protection
Special Order · Ships in 2-3 weeks

$544.52 $370.99 Save $173.53

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7531MED

STI MED Protective Cabinet, Polycarbonate with Wire Rack and Thumb ...

Polycarbonate protective cabinet with thumb lock for equipment security
- Wire rack interior supports up to 32 users on 9VDC operation
- Thumb lock strike mechanism provides manual access control
- Indoor wall-mount design operates from 32°F to 120°F
Special Order · Ships in 2-3 weeks

$391.96 $266.99 Save $124.97

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7510B

STI Polycarbonate Enclosure with Enclosed Back Box & Double-Gang El...

Double-gang polycarbonate strike enclosure for indoor and covered outdoor
- Enclosed back box design with dual-gang mounting for secure access control
- Polycarbonate construction rated for covered outdoor environments and weather
- Wall-mounted configuration compatible with standard electronic strike systems
Special Order · Ships in 2-3 weeks

$81.74 $52.99 Save $28.75

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7510A

STI Polycarbonate Enclosure with Enclosed Deep Back Box and Exterio...

NEMA 4 polycarbonate enclosure for outdoor access control
- Deep back box design accommodates strikes, locks, and reader assemblies
- NEMA 4 rating protects against water spray, dust, and corrosion
- Wall-mount polycarbonate construction rated IP59 for harsh environments
Special Order · Ships in 2-3 weeks

$89.40 $56.99 Save $32.41

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7510E-OW

STI Polycarbonate Enclosure with Open Back Box and Exterior Key Lock

Polycarbonate enclosure with exterior key lock for access control hardware
- Open back box design with pre-drilled mounting holes for quick installation
- IP59-rated polycarbonate construction resists impact and environmental exposure
- Exterior key lock secures internal reader and strike components from tampering
Special Order · Ships in 2-3 weeks

$127.59 $81.99 Save $45.60

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7510C

STI Polycarbonate Enclosure with Open Back Box for Flush Mount Appl...

Polycarbonate flush-mount enclosure for electronic lock integration
- Open back box design for quick wiring to access control hardware
- Compatible with STI lock and strike assemblies for secure mounting
- Works in new construction and retrofit installations on standard frames
Special Order · Ships in 2-3 weeks

$81.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7510D

STI Polycarbonate Enclosure with Open Conduit Back Box, Surface Mou...

Surface-mount polycarbonate enclosure for access control readers
- Open conduit back box design supports field wiring integration
- Polycarbonate construction for retrofit and new installation scenarios
- Wall-mounted housing with thumb lock or key lock package included
Special Order · Ships in 2-3 weeks

$81.74 $52.99 Save $28.75

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7533

STI Protective Cabinet - Polycarbonate with Backplate, Siren Alarm,...

NEMA 4X polycarbonate cabinet with integrated siren alarm for outdoor access control
- Impact-resistant polycarbonate withstands harsh outdoor, wet, and coastal environments
- Integrated siren alarm provides audible notification for access events and security alerts
- Lock/strike assembly with wall and pedestal mounting for flexible installation options
Special Order · Ships in 2-3 weeks

$413.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7525

STI Protective Cabinet with Siren/Strobe Alarm, Thumb Lock

NEMA 4X protective cabinet with thumb lock and siren/strobe alarm
- Thumb lock access control with integrated siren and strobe alarm system
- NEMA 4X steel construction rated for indoor and outdoor environments
- Wall-mounted design for secure storage of access control equipment
Special Order · Ships in 2-3 weeks

$268.16 $168.99 Save $99.17

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-GFA-BB

STI Red Back Box for GF Series No Camera, w/2 - ½” NPT Plug

Red Back Box enclosure for STI GF Series, wall or recessed mount
- Houses GF Series control unit with 9VDC power requirement
- Includes 2 × ½" NPT plugs for standard conduit connections
- Supports wall-mount or recessed installation in access control setups
Special Order · Ships in 2-3 weeks

$28.20 $19.99 Save $8.21

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-7500-HTR

STI Replacement Heater for STI-7510 and STI-7511 series

Direct replacement heater for STI-7510 and STI-7511 locks
- 9VDC wired heating element for temperature-sensitive access control
- Integrates with TCP/IP and RS-232 control systems
- Wall-mount design for straightforward installation and replacement
Special Order · Ships in 2-3 weeks

$138.65 $87.99 Save $50.66

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6602

STI Replacement Horn Kit for STI-13000 Universal Stopper® series

Replacement horn for STI-13000 Universal Stopper electric strikes
- Drop-in retrofit horn kit operates at 9VDC for existing installations
- Compatible with STI-13000 series universal stopper door control systems
- Component-level replacement eliminates need for full system replacement
Special Order · Ships in 2-3 weeks

$64.02 $40.99 Save $23.03

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: RP-GF2-11

STI RP-GF2-11 ReSet Call Point Flush Mount Green

Flush-mount call point reader with HID compatibility for secure door access
- Two-way communication for visitor requests at secured entry points
- Green housing with IP67 rating for indoor/outdoor door access applications
- Flush-mount design integrates seamlessly into walls at building entrances
Special Order · Ships in 2-3 weeks

$27.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-8230-W

STI Smoke Detector Damage Stopper® with Conduit Spacer - White Coat...

Protective housing for smoke detectors in high-traffic areas with integral conduit spacer
- Damage Stopper® design shields detectors from vandalism while maintaining sensor airflow
- Integral 50mm conduit spacer simplifies ceiling and wall mounting configurations
- Compatible with HID proximity and NFC access control system environments
Special Order · Ships in 2-3 weeks

$104.58 $66.99 Save $37.59

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

STI KIT-REV80 EnviroArmour Polycarbonate Breather Vent

STI KL544 Key Lock for Metal Cabinets

STI MED Protective Cabinet - Polycarbonate with Wire Rack, Siren Al...

STI MED Protective Cabinet, Polycarbonate with Wire Rack and Thumb ...

STI Polycarbonate Enclosure with Enclosed Back Box & Double-Gang El...

STI Polycarbonate Enclosure with Enclosed Deep Back Box and Exterio...

STI Polycarbonate Enclosure with Open Back Box and Exterior Key Lock

STI Polycarbonate Enclosure with Open Back Box for Flush Mount Appl...

STI Polycarbonate Enclosure with Open Conduit Back Box, Surface Mou...

STI Protective Cabinet - Polycarbonate with Backplate, Siren Alarm,...

STI Protective Cabinet with Siren/Strobe Alarm, Thumb Lock

STI Red Back Box for GF Series No Camera, w/2 - ½” NPT Plug

STI Replacement Heater for STI-7510 and STI-7511 series

STI Replacement Horn Kit for STI-13000 Universal Stopper® series

STI RP-GF2-11 ReSet Call Point Flush Mount Green

STI Smoke Detector Damage Stopper® with Conduit Spacer - White Coat...

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading